Your cart is currently empty!
Full Suspension Kits - 3rd Gen 4Runner
Showing all 6 results
-
4Runner 3rd Gen (1996-2002)Dobinsons 2-2.5″ Lift Kit for Toyota 4Runner 1996 to 2002 3rd Gen
- Suits 3rd Gen 4Runner 1996-2002 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Teal, Red or Black coils in the selections below
From $1,200.00 Select options -
4Runner 3rd Gen (1996-2002)Ships FREE !!
within 48 US StatesDobinsons 3rd Gen 4Runner IMS 2-2.5″ Lift Kit for 1996 to 2002
- Suits 3rd Gen 4Runner 1996-2002 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Select from Teal, Red, or Black coil springs in the options below
From $1,770.00 Select options -
Dobinsons
Dobinsons 2-2.5″ Pre-Assembled IMS Coilovers for Toyota 4Runner 3rd Gen
- Suits 1996-2002 Toyota 4Runner 3rd Gen 4×4 Models
- Looking for a quick and easy way to lift your 3rd Gen 4Runner? This is your answer
- Extended Travel IMS59-50222 Coilovers – 473mm extended, 335mm compressed lengths
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
- Link to Matching rear shocks
$1,165.00 Select options -
Full Suspension Kits - 3rd Gen 4RunnerShips FREE !!
within 48 US StatesDobinsons 3rd Gen 4Runner MRA 2-2.5″ Lift Kit for 1996 to 2002
- Suits 3rd Gen 4Runner 1996-2002 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Base Kit Price Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Standard Coil Springs
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Common installation instructions
From $2,970.00 Select options -
4Runner 3rd Gen (1996-2002)Ships FREE !!
within 48 US StatesDobinsons 2-2.5″ Pre-Assembled MRA 4Runner Coilovers for 1996-2002
- Suits 1996-2002 Toyota 4Runner 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
- Link to matching rear shocks
$1,795.00 Select options
