Your cart is currently empty!
Dobinsons 2″ Rear Lift Quick Ride Kit | Chevy Silverado GMC Sierra 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 from 2019-2024, Does Not Suit Trailboss or AT4 Models
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended – IMS09-60179
- Only to be used with OE height leaf springs
- Installation Instructions
$140.00
In Stock
SKU: QR09-583K
Categories: Add-a-Leaf, Dobinsons, Silverado 1500 (2019-2024)
Tag: Quick Ride
Brand: Dobinsons Spring & Suspension
Description
Dobinsons Spring & Suspension offer these 2.0″ spacer lift blocks and suitable u-bolts to fit the rear of the Chevy Silverado 1500 and GMC Sierra 1500 from 2019-2024, Does Not Suit Trailboss or AT4 Models. Designed to work with the original leaf springs, these lift blocks will give a quick 2.0″ of lift over stock height. They are only intended to be used with stock height springs.
The spacer blocks are cast, and correct for rear caster, and the u-bolts are zinc coated (gold colored) and suited to match the OE leaf springs and spacer blocks.
NOTE: New extended length shocks should be purchased, as it is highly likely that the original equipment shocks will be too short and will quickly wear out faster than intended due to riding at almost full-extension. Dobinsons offer high quality twin tube shocks for this vehicle. Part number IMS09-60179
Suits the following trucks:
2019 Chevy Silverado 1500
2020 Chevy Silverado 1500
2021 Chevy Silverado 1500
2022 Chevy Silverado 1500
2023 Chevy Silverado 1500
2024 Chevy Silverado 1500
2019 GMC Sierra 1500
2020 GMC Sierra 1500
2021 GMC Sierra 1500
2022 GMC Sierra 1500
2023 GMC Sierra 1500
2024 GMC Sierra 1500
You must be logged in to post a review.
You may also like…
-
Silverado 1500 (2019-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS09-60179 2.6″ IFP Rear Shocks Pair | Chevy Silverado 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Recommended to run with Dobinsons coils
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 635mm extended, 410mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(0 reviews)
Related products
-
Dobinsons
Dobinsons 2-2.5″ Lift Kit Toyota Tundra 2000-2006 with Quick Ride Rear (all options)
- For 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- Choose from twin tube, IMS or MRA shocks in the drop down menu below
- It’s recommended that the IMS and MRA coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
(13 reviews) -
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews) -
Recovery
Dobinsons 4×4 Deluxe Vehicle Recovery Kit, Full Winching Kit
- Complete kit Includes: 9m x 8,000kg Snatch Strap with Sliding Protective Sleeve, 3m x 12,000kg Tree Trunk Protector
- Heavy Duty Carry Bag, Heavy Duty Leather Gloves
- Waterproof Work Mat (63 x 55″), Compact Tri-Fold Shovel, Heavy Duty 18,000lb Greasable Snatch Block (Pulley)
- 2 x 3.25 Ton Bow Shackle, 2 x 4.75 Ton Bow Shackle, Digital Tire Gauge with Auto Shut Off (psi, bar, kpa & kg/cm3)
- Packed Bag Dimensions: 23 x 12 x 6″, 30 LBS
(10 reviews) -
Recovery
Dobinsons 4×4 Tree Trunk Protector Strap for Winching 26000 LB (12000 KG)
- Rated at 26,000 LB (12,000KG)
- Length is 10FT (3M), and 3″ Strap Thickness
- Green in color to not confuse with Snatch Straps
- Rolls up small, compact, and easy to keep in the vehicle
(9 reviews)
Reviews
There are no reviews yet.