Your cart is currently empty!
Dobinsons 4Runner FJ GX460 Swaybar Drop Bracket Kit 2010-2024
- Suits 2010-2024 Toyota 4Runner 4×4 models, 2010+ Toyota FJ Cruiser, 2010-2023 Lexus GX460 (without KDSS)
- Lowers stock front sway bar for better working angle
- Includes machined aluminum spacers
- Easy bolt-on installation
- INSTALLATION INSTRUCTIONS
- Includes new correct grade longer hardware
- Recommended for lift heights of 2″ or more to correct sway bar operating angle
- Includes Radiator Drop Brackets.
- Kit Includes
- Bolts / Washers
- 4x M10x1.25 – 20mm long (8mm Allen)
- 6x M10x1.25 – 40mm long (18mm Socket/Wrench)
- 4x M10x1.25 – 20mm long  (16mm Socket/Wrench)
- 10x M10 Washers
- Spacers
- 2x Round Spacers (Radiator Support)
- 4x Square Spacers (Lower Radiator Support)
- 2x Rectangular Spacers (Sway Bar Spacer)
- Bolts / Washers
- NOT for vehicles with KDSS
$95.00
In StockDescription
This 4Runner swaybar drop bracket kit includes 2 machined aluminum spacers and necessary hardware to space down the stock front sway bar on 2010-2024 Toyota 4Runner models, 2010+ Toyota FJ Cruiser, and 2010-2023 Lexus GX460, putting it back to a proper working angle, and allowing each wheel to once again move more freely. These are a good idea to add when a vehicle is lifted 2″ or more to correct the sway bar angle. At 3″ or more, these should most definitely be added.
Not for use on vehicles with KDSS.
Instructions are simple on this 4Runner Swaybar Drop Bracket Kit. Undo the stock sway bar mounts where it attaches to the frame. Place the 4Runner Swaybar drop spacer between the sway bar mount and the frame, and reattach the sway bar with the new supplied longer hardware, and you’re done.
Some people think this is done to keep the sway bar from contacting the strut assembly. That is not the case with all Dobinsons front struts including twin tube, IMS, and MRR or MRA strut assemblies. This is simply to reposition the swaybar back to a better working angle. A high angle sway bar can actually hold up the front suspension and restrict the movement of one side or the other due to the higher working angle. This Tacoma Drop Bracket Kit helps alleviate that issue.
To see all 4Runner parts that Exitoffroad.com has to offer, follow this link here:Â https://exitoffroad.com/product-category/toyota/4runner/
Vehicle Fitment:
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner
2024 Toyota 4Runner
2010 Lexus GX460 without KDSS
2011 Lexus GX460 without KDSS
2012 Lexus GX460 without KDSS
2013 Lexus GX460 without KDSS
2014 Lexus GX460 without KDSS
2015 Lexus GX460 without KDSS
2016 Lexus GX460 without KDSS
2017 Lexus GX460 without KDSS
2018 Lexus GX460 without KDSS
2019 Lexus GX460 without KDSS
2020 Lexus GX460 without KDSS
2021 Lexus GX460 without KDSS
2022 Lexus GX460 without KDSS
2023 Lexus GX460 without KDSS
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
2015 Toyota FJ Cruiser
2016 Toyota FJ Cruiser
4 reviews for Dobinsons 4Runner FJ GX460 Swaybar Drop Bracket Kit 2010-2024
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
Tacoma 3rd Gen (2016-2023)FREE SHIPPING
within 48 US StatesDobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- All lift heights are based on the baseline of 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. A 3″ front lift is 23″ for example. Some Tacoma’s come with 1″ lift from the factory
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(10 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews)
Sean (verified owner) –
Good quality, really nice.
Justin (verified owner) –
Just what I needed.
Thomas (verified owner) –
It’s exactly what I wanted.
Benjamin (verified owner) –
Would definitely buy from this site again.