Your cart is currently empty!
Sale!
On Sale All November!!
Dobinsons 100 Series Snorkel Kit for Land Cruiser 1998-2007
- 100 Series Snorkel Kit – Suits Toyota Land Cruiser 100 Series 1998-2007 Models
- Smooth body, no words or logo on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
Original price was: $355.00.$301.75Current price is: $301.75.
In Stock
EAN: 9332670047346
SKU: SN59-3369
Categories: 100 Series Land Cruiser IFS (1998-2007), Accessories, Dobinsons, Exceptions, LX470, Performance Upgrades - 100 Series, Snorkel
Tag: sn59-3369
Brand: Dobinsons Spring & Suspension
Description
Dobinsons 100 Series Snorkel Kits offer a high quality Raised Air Intake System at a competitive price, offering a great solution to provide cleaner air to the vehicle’s engine. Grab a Land Cruiser 100 Series Snorkel Kit today and raise up your air intake to deliver cleaner and cooler air than a factory intake. Dust has mass, so the higher up you go with the air intake, the less dust will be mixed in the air. When in a vehicle convoy on dusty and dirty roads, it’s important to keep a good gap from the vehicles in front of you to reduce the amount of dust that goes into your intake, and by adding a 100 Series Snorkel Kit, you’ll be sure to keep the intake cleaner and keep your air filter in better condition for longer.
SN59-3369 Land Cruiser 100 Series Snorkel Kit is designed specifically for the body and OEM air intake of the 1998 to 2007 Toyota Land Cruiser 100 Series and 105 Series, suitable for all engines offered, diesel or gas/petrol. NOTE: Power Antenna may need to be relocated for proper snorkel install.
Rotationally molded using precision CNC shaped aluminum dies, this ensures proper vehicle fitment every time using the supplied instructions. This snorkel kit increases the air intake height to allow safer water crossings and reduce the dust intake, and after following the installation instructions carefully, your snorkel kit could seal out excess dust and moisture from your air cleaner. The Increased air intake height rams cooler, cleaner air into the engine increasing engine performance due to a cleaner air filter with more free flowing air. Manufactured from high quality UV resistant LLDPE, this type of material is incredibly durable, maintaining its’ shape and finish for years to come. All Snorkel Kits include installation template and all mounting hardware required, and a listing of tools required. This kit does not provide any specialty tools for the installation.
Note: Fitment to any vehicle and engine not matching this description is not recommended by Dobinsons and is not covered by our return or warranty policy.
Dobinsons Snorkel Kits are available for Ford Ranger, Isuzu D-Max, Holden Rodeo, Mitsubishi Triton/L200, Mitsubishi Delica, GQ/Y60 and GU/Y61 Nissan Patrol, D40 Nissan Navara, 71, 73, 74, 75, 78, 80, 100, 105, and 200 Series Toyota Land Cruiser, 90, 120, and 150 Series Toyota Prado, and Toyota Hilux/Vigo.
Vehicle Fitment:
1998 Toyota Land Cruiser Snorkel Kit
1999 Toyota Land Cruiser Snorkel Kit
2000 Toyota Land Cruiser Snorkel Kit
2001 Toyota Land Cruiser Snorkel Kit
2002 Toyota Land Cruiser Snorkel Kit
2003 Toyota Land Cruiser Snorkel Kit
2004 Toyota Land Cruiser Snorkel Kit
2005 Toyota Land Cruiser Snorkel Kit
2006 Toyota Land Cruiser Snorkel Kit
2007 Toyota Land Cruiser Snorkel Kit
9 reviews for Dobinsons 100 Series Snorkel Kit for Land Cruiser 1998-2007
You must be logged in to post a review.
Related products
-
Sale!SuspensionFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A682 3-Way Adjustable MRA Rear Shocks Pair | 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2021, Sequoia 2001-2007, suitable for 0 – 3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 620mm extended, 390mm compressed
- Installation Instructions of the MRA Shocks
(19 reviews) -
Sale!100 Series Land Cruiser IFS (1998-2007)On Sale All November!!
Dobinsons 100 Series Land Cruiser Rear Coil Spring Options – Pair
- For Land Cruiser 100 Series and Lexus LX470 1998-2007
- Choose what coil suits your vehicle and needs the best, see description below
- Sold in Pairs
- Keep in mind, these lift heights are over the new OEM stock height, not the worn out stock height of a 15-20 year old vehicle
- Older vehicles may be 1/2-1″ below original height already
- C59-169 – 1″ lift, linear rate, with stock weight. For slightly above OE stock height. Ideal if someone is doing AHC removal but doesn’t want to add lift
- C59-223V – 1″-1.25″ lift, variable rate, with stock weight. Equivalent to C59-169, but variable rate for more comfortable ride quality and low lift height
- C59-167 – 2″ lift with stock weight (with 3rd row seat installed), 1.5″ lift with 150-220LBS constant rear weight
- C59-185 – 1.5″ lift, linear rate, with 440LBS constant rear weight
- C59-171 – 1.5″ lift, linear rate, with 880LBS constant rear weight
(17 reviews) -
Sale!100 Series Land Cruiser IFS (1998-2007)On Sale All November!!
Dobinsons GS59-782 Pair of Front Shocks | Land Cruiser 100 Series (0-2″ lift)
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-782 Specifications: 442mm extended, 288mm compressed, 60mm body size
- **Photo for illustration purposes, not of actual shocks
(10 reviews) -
Sale!SuspensionOn Sale All November!!
Dobinsons IMS59-60682 Rear 2.6″ IFP Shocks Pair | Sequoia + Land Cruiser 80/100/200 0-3″
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2020, as well as 2001-2007 Sequoia for 0-3″ of lift
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- 610mm extended, 389mm compressed
(14 reviews)
Joseph (verified owner) –
*****
Jose (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jacob (verified owner) –
*****
Edward (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Ryan (verified owner) –
I received it really fast.
Chad (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Bryan (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jacob (verified owner) –
Just what I needed.
Kenneth (verified owner) –
Just what I needed.