Your cart is currently empty!
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
$405.00
In Stock
SKU: WA59-520K
Categories: 4Runner 4th Gen (2003-2009), 4Runner 5th Gen (2010-2024), Control Arms, Control Arms - FJ Cruiser Early, Control Arms - FJ Cruiser Late, Control Arms - Lexus GX460, Control Arms - Lexus GX470, Dobinsons, Early FJ Cruiser (2006-2009), GX460 (2010-2023), GX470 (2002-2009), Late FJ Cruiser (2010-2016), Lower Control Arms, Suspension, UCAs and Control Arms - 4th Gen 4Runner, UCAs and Control Arms - 5th Gen 4Runner
Tag: wa59-520k
Brand: Dobinsons Spring & Suspension
Description
Dobinsons WA59-520K Details
Dobinsons WA59-520K Adjustable Rear Lower Control Arms for Toyota and Lexus – These are adjustable rear lower control or sometimes called trailing arms, to be used on any vehicle lifted or not, up to 4″ of lift. This kit comes with both side lower arms and also includes a full poly bush kit. Rubber bushings now come pressed into the Dobinsons WA59-520K arms, as they are maintenance and noise-free. Rubber bushings allow for greater flex (travel). These adjustable arms will allow you to properly set your rear pinion angle due to adding a lift, while also adding strength over the stock arms. Suitable also for long travel rear suspension setups.
NOTE: The Dobinsons WA59-520K threaded end goes towards the frame end with the metal protector facing downwards, and the curved section of the arm faces downwards, to relieve the angle where the bushing meets the axle so that the axle can rotate without stressing the end of the Dobinsons WA59-520K arm. This is done instead of offsetting the bushings at the end, making them as strong as possible.
Instructions for use: Set the initial length to the same as factory arms, then add 1/2″ or so to the overall length. Install, then check the pinion angle, then add at 1/2″ increments until your pinion angle is set properly. Adding too much length could lead to driveline vibrations. What this does is sets your pinion angle, and also you can center the wheel in the rear wheel well, as with more lift added to the vehicle, the tire starts to move forward in the wheel well.
Dobinsons WA59-520K Suits all these vehicles:
Toyota 4th Gen 4Runner 2003-2009
Toyota 5th Gen 4Runner 2010-2024
Lexus GX470 (all years)
Lexus GX460 (all years)
Toyota FJ Cruiser (all years)
Dobinsons heavy duty rear trailing arms are the most affordable on the market, while adding necessary strength to the rear end. The last thing you want when you offroad a lot is a bent rear trailing arm, as this affects your rear end alignment and your vehicle will not track straight down the road. With 5mm thick wall tubing, you can’t go wrong with a set of these.
To see all Dobinsons control arms, click here:Â https://exitoffroad.com/product-category/suspension/control-arms/
The construction and adjustment of this part is exactly like the Dobinsons Panhard rods, as shown in this video here:
Vehicle Fitment:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner
2024 Toyota 4Runner
2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470
2010 Lexus GX460
2011 Lexus GX460
2012 Lexus GX460
2013 Lexus GX460
2014 Lexus GX460
2015 Lexus GX460
2016 Lexus GX460
2017 Lexus GX460
2018 Lexus GX460
2019 Lexus GX460
2020 Lexus GX460
2021 Lexus GX460
2022 Lexus GX460
2023 Lexus GX460
2006 Toyota FJ Cruiser
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
2015 Toyota FJ Cruiser
2016 Toyota FJ Cruiser
14 reviews for Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
You must be logged in to post a review.
Related products
-
80 Series Land Cruiser (1990-1997)
Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series and Lexus LX450 from 1980-1997
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- 650mm extended, 420mm compressed
(7 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons UB59-437K Rear U-Bolts (2 Pairs)
- These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- These are 210mm / 8.25″ in length
- Photo for illustration purposes. These are square at the top
(7 reviews) -
Dobinsons
Dobinsons Front 30mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(4 reviews) -
Dobinsons
Dobinsons C59-300 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
(15 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page
Bryan (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Thomas (verified owner) –
It’s exactly what I wanted.
Justin (verified owner) –
Would definitely buy from this site again.
Jose (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Stephen (verified owner) –
Very fast delivery.
Eric (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Scott (verified owner) –
*****
Jesse (verified owner) –
Value for money, super satisfied.
Robert (verified owner) –
Very good customer service, super friendly.
Stephen (verified owner) –
Good quality, really nice.
Aaron (verified owner) –
Would definitely buy from this site again.
Kenneth (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Sean (verified owner) –
*****
Andrew (verified owner) –
Value for money, super satisfied.