Your cart is currently empty!
Dobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022+, Sequoia 2023+, Land Cruiser 250 Series 2024+, and Tacoma 2024+
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
$345.00
In Stock
SKU: WA59-571K
Categories: 250 Series Land Cruiser (2024+), Control Arms, Control Arms - LC250, Control Arms - Sequoia 3rd Gen, Control Arms - Tacoma 4th Gen, Control Arms - Tundra 2022+, Dobinsons, Sequoia 3rd Gen (2023-2024+), Suspension, Tacoma 4th Gen (2024+), Tundra 3rd Gen (2022-2024), Upper Control Arms
Brand: Dobinsons Spring & Suspension
Description
Dobinsons WA59-571K are adjustable rear upper control arms for Toyota Tundra 2022+ and 2023+ Sequoia and 2024+ Toyota Tacoma and 2024+ Land Cruiser 250 Series, to be used on any vehicle lifted or not, up to 4″ of lift. This Dobinsons WA59-571K kit comes with both upper arms and has the pre-installed rubber bushings. The rubber bushings allow for more flex of the rear axle, and will also be noise and maintenance free. These adjustable arms will allow you to properly set your rear pinion angle due to adding a lift, while also adding strength over the stock arms. Suitable also for long travel rear suspension setups.
Instructions for Dobinsons WA59-571K use: The shorter end goes towards the frame, with the long end towards the axle. Set initial length to the same as factory arms, and install them loosely, then measure your pinion angle, and adjust the arm length until it is set properly. Adding too much length could lead to driveline vibrations.
Suits all these vehicles:
Toyota Tundra 2022+
Toyota Sequoia 2023+
Toyota Tacoma 2024+
Toyota Land Cruiser 250 2024+
Dobinsons Spring & Suspension™ established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components. With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Spring Industry in Australia applying the years of knowledge into their products. The success of the business has come about by providing quality products, acquiring and using technical knowledge and having the equipment to perform and provide professional service.
Dobinsons Spring & Suspension™ pride themselves on having the world’s largest range of 4×4 spring and suspension componentry. This extensive range can be viewed using their online catalogues or selecting online.
Their quality of design and manufacture is what sets Dobinsons apart from their competitors, if not the price. The company manufactures and repairs a large range of springs and sells a comprehensive range of suspension components.
They have over 13,000 spring specifications on hand and computerized spring design programs providing them with professional and accurate results. For the past 25 years,
Dobinsons Spring & Suspension™ have been exporting their products to different parts of the world and their name has become synonymous with quality in these countries. The factory covers over 4000m², consisting of a leaf spring production line, a coil spring production line and two large stock holding warehouses. There are thousands of parts kept in stock, including Coil Springs, Leaf Springs, Torsion Bars, Shock Absorbers, Greasable Shackle Kits and Pins, U-Bolts, Polyurethane Bushes, Centre Bolts, Castor Wedges & 4×4 Accessories. It also includes a fully equipped service department dedicated to removing and replacing all types of suspension componentry on passenger vehicles, 4×4 vehicles and trucks.
Vehicle Fitment:
2022 Toyota Tundra
2023 Toyota Tundra
2024 Toyota Tundra
2023 Toyota Sequoia
2024 Toyota Sequoia
2024 Toyota Tacoma
2024 Toyota Land Cruiser 250 Series
4 reviews for Dobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
You must be logged in to post a review.
Related products
-
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(6 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews)
David (verified owner) –
It’s exactly what I wanted.
Scott (verified owner) –
Value for money, super satisfied.
Jose (verified owner) –
5 Stars!!
Adam (verified owner) –
This is my go-to now for off road parts.