Your cart is currently empty!
Price Increase Coming May 1st
Dobinsons Adjustable Rear Sway Bar Link Pair | SE59-591
- Suits the rear of Toyota Tundra 2022-2025+, Toyota Sequoia 2023-2025+, Toyota Tacoma 2024-2025+, Toyota Land Cruiser 300 Series 2022-2025+, Lexus GX550, Toyota Land Cruiser 250 Series 2024-2025+
- Order 1 for 1 vehicle (sold as a pair)
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Adjustable length to suit lift heights of 1″ to 4″
- Watch a video here to see more about how this style of link adjusts: https://youtu.be/lZACSaE2PHI
- Photo is of the product installed on a 2022 Tundra
$200.00
In StockDescription
Tundra Swaybar Links
Sequoia Swaybar Links
Tacoma Swaybar Links
Lexus GX550 Swaybar Links
Tundra swaybar links (Dobinsons SE59-591) – These are adjustable sway bar extensions to suit 2″ to 4″ of lift, allowing your sway bar to work properly and reset back to it’s factory riding angle on the road. Adjust the rod length according to your lift height, and so that the sway bar is riding as close to a factory position as possible. The base setting should be to add half of your lifted height to the stock length. Take new links, make them the same length as stock, then add exactly half of the lifted lift height amount to them, and check for clearances. If they’re set too long, they will contact the trailing arm. Gold zinc plated, high quality OE style ball end joints, sealed for long life, this kit includes all that you will need.
Suits these vehicles:
Toyota Tundra 2022+
Toyota Sequoia 2023+
Toyota Land Cruiser 300 Series 2022+
Toyota Tacoma 2024+ rear
Lexus GX550
Toyota Land Cruiser 250 2024+
Many people don’t realize that when lifting their vehicle, the sway bar angle because a lot steeper than normal, and this actually affects the wheel travel and ride comfort inside the vehicle. The sway bar links are literally stretched out and causing a type of binding on the rear sway bar not being able to do its job properly. By changing out the original swaybar links to the Tundra swaybar links by Dobinsons, you can set the angle back to a more neutral position, gaining wheel travel, gaining ride comfort, and also helping the swaybar to properly assist the vehicle in keeping it more level when cornering. These Tundra swaybar links should be used at any lift height of over 1.5″ so that you get the proper articulation from your new suspension kit, and are required with a lift height of 2.0″ or more. You’ll also notice that if you don’t have longer sway bar links installed, reinstalling the original links can be quite difficult as they’re very tight on a lifted Toyota Tundra, Sequoia or 300 Series Land Cruiser.
To see a video of how this product adjusts, click here: https://youtu.be/lZACSaE2PHI
Vehicle Suitability:
2022 Toyota Tundra Rear Sway Bar Links
2023 Toyota Tundra Rear Sway Bar Links
2024 Toyota Tundra Rear Sway Bar Links
2025 Toyota Tundra Rear Sway Bar Links
2023 Toyota Sequoia Rear Sway Bar Links
2024 Toyota Sequoia Rear Sway Bar Links
2025 Toyota Sequoia Rear Sway Bar Links
2022 Toyota Land Cruiser 300 Series Rear Sway Bar Links
2023 Toyota Land Cruiser 300 Series Rear Sway Bar Links
2024 Toyota Land Cruiser 300 Series Rear Sway Bar Links
2025 Toyota Land Cruiser 300 Series Rear Sway Bar Links
2024 Toyota Tacoma Rear Sway Bar Links
2025 Toyota Tacoma Rear Sway Bar Links
2024 Lexus GX550 Rear Sway Bar Links
2025 Lexus GX550 Rear Sway Bar Links
2024 Toyota Land Cruiser 250
2025 Toyota Land Cruiser 250
15 reviews for Dobinsons Adjustable Rear Sway Bar Link Pair | SE59-591
You must be logged in to post a review.
You may also like…
-
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesPrice Increase Coming May 1stDobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma
- Suits all 2022-2025+ Toyota Tundra and 2024-2025+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesPrice Increase Coming May 1stDobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022-2025+, Sequoia 2023-2025+, Land Cruiser 250 Series 2024-2025+, and Tacoma 2024-2025+ and Lexus GX550 2024+
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
(4 reviews)
Related products
-
DobinsonsPrice Increase Coming May 1st
Dobinsons Front 30mm Coil Spacer (Single)
- Suits:
- Land Cruiser 80 Series and Lexus LX450
- Range Rover 1971-1988
- Land Rover Discovery Series I 1991-1999
- Defender 90 1984-1990
- Defender 110 1984-1992
- Defender 110 + 130 1992-2001
- Defender 110 + 130 2007-2019
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(4 reviews) - Suits:
-
DobinsonsPrice Increase Coming May 1st
Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
(14 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
ExceptionsFREE SHIPPING
within 48 US StatesPrice Increase Coming May 1stDobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
DobinsonsPrice Increase Coming May 1st
Dobinsons Greasable Bolt Pair | SP59-060
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
- 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end
(12 reviews)
Timothy (verified owner) –
Very fast delivery.
Kenneth (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jose (verified owner) –
Great description on the page, easy to understand what I was buying.
Kenneth (verified owner) –
Would definitely buy from this site again.
Michael (verified owner) –
Value for money, super satisfied.
Robert (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Kevin (verified owner) –
Good quality, really nice.
Andrew (verified owner) –
Value for money, super satisfied.
Justin (verified owner) –
5 Stars!!
Michael (verified owner) –
This is my go-to now for off road parts.
Justin (verified owner) –
Value for money, super satisfied.
Aaron (verified owner) –
It’s exactly what I wanted.
Bradley (verified owner) –
Value for money, super satisfied.
Timothy (verified owner) –
Just what I needed.
Bryan (verified owner) –
Good quality, really nice.