Your cart is currently empty!
within 48 US States
Dobinsons Front Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser
- Complete Front hydro bump stop kit to replace the factory coil isolator and internal bump stops
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-012FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
$940.00
In StockDescription
Dobinsons Front Adjustable Hydro Bumps Kit (hydraulic bump stops kit) for Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997. This hydro bumps stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection, in addition to setting the bump stop gap for long travel shocks, increased tire clearance, or whatever else you may need to restrict or free up the amount of bump stop gap that your Land Cruiser has. The adjustable hydro bumps can easily spin on their threaded body to raise up or down in the mounts provided so that you can tune in the height quite easily. You’ll possibly have to take the coil out of the way to get in there and accurately set and adjust the height.
Dobinsons rich racing history has produced the line of IMS and MRA shock absorbers and this monotube technology has now been passed into the new hydro bumps stop line. The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each hydraulic product to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Matching rear hydro bump kit for the 80 Series Land Cruiser:
Dobinsons Rear Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser
To see all bump stops that Exit Offroad offer, check it out here: Bump Stops Category
Vehicle Fitment:
1990 Toyota Land Cruiser 80 Series
1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series
1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series
1995 Lexus LX450
1996 Lexus LX450
1997 Lexus LX450
9 reviews for Dobinsons Front Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser
You must be logged in to post a review.
You may also like…
-
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-019FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(7 reviews)
Sean (verified owner) –
Value for money, super satisfied.
Jose (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Matthew (verified owner) –
Great description on the page, easy to understand what I was buying.
Jose (verified owner) –
Would definitely buy from this site again.
Patrick (verified owner) –
I received it really fast.
Steven (verified owner) –
*****
Brandon (verified owner) –
Would definitely buy from this site again.
Steven (verified owner) –
It’s exactly what I wanted.
Nathan (verified owner) –
*****