Your cart is currently empty!
Sale!
On Sale All November!!
Dobinsons Front Axle-End Radius Arms Bushings Kit, OE Rubber Replacement Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- For any lift height, or no lift. These are OE replacement rubber bushings.
- High quality rubber, producing the highest ride quality
- Pressing of bushings is required during installation
- Replaces OE bushings holding front radius arms to the axle in all 4 positions
Original price was: $170.00.$144.50Current price is: $144.50.
In Stock
EAN: 9332670055297
SKU: RB59-536K
Categories: 80 Series Land Cruiser (1990-1997), Bushings, Caster and Alignment, Control Arms - 80 Series, Dobinsons, Suspension
Tag: rb59-536k
Brand: Dobinsons Spring & Suspension
Description
Dobinsons Spring & Suspension front radius arm bushings for the axle end, OE replacement high quality rubber bush kit. Kit contains 4 rubber bushings. These have no caster adjustment, so they can be used with a stock height vehicle, or a lifted vehicle that is using Dobinsons Caster Plates (sold separately).
Use with RB59-534K to replace bushings on both ends of each radius arm. Purchasing both at the same time with replace all the OE bushes with brand new high quality rubber bushes.
Also suitable for the same position on the Toyota Land Cruiser 70 Series models LJ70, LJ72, LJ73, LJ77, RJ70, RJ73 (with square headlights).
Also suits various generations of Nissan Patrol Pickups and Wagons. Contact Dobinsons for application verification before ordering.
Vehicle Fitment:
1990 Toyota Land Cruiser 80 Series
1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series
1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series
1995 Lexus LX450
1996 Lexus LX450
1997 Lexus LX450
8 reviews for Dobinsons Front Axle-End Radius Arms Bushings Kit, OE Rubber Replacement Land Cruiser 80 Series
You must be logged in to post a review.
You may also like…
-
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons Front Rubber Bushings, Radius Arm to Chassis (Fixed End) for Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- For any lift height, or no lift. These are OE replacement bushings.
- High quality rubber, producing the highest ride quality
- Pressing of bushings is required during installation
- Replaces OE bushings holding front radius arms to the frame
(0 reviews)
Related products
-
Sale!4Runner 4th Gen (2003-2009)On Sale All November!!
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/INÂ variable spring rate
(15 reviews) -
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews)
Daniel (verified owner) –
Just what I needed.
Jeffrey (verified owner) –
5 Stars!!
Jonathan (verified owner) –
This is my go-to now for off road parts.
Anthony (verified owner) –
*****
Adam (verified owner) –
Good quality, really nice.
Christopher (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Christopher (verified owner) –
Very good customer service, super friendly.
Chad (verified owner) –
Good quality, really nice.