Your cart is currently empty!
Dobinsons SE59-516 Front Sway Bar Extension Set | Land Cruiser 70 and 80 Series
- Toyota Land Cruiser 80 series, only 9/1991 plus models, Lexus LX450, and Also suits LJ78, LJ79, RJ77, KZJ78
- For 2″ to 6″ lift heights
- Zinc plated steel with all hardware supplied
- Simple bolt-on design
- Reduces bushing wear and corrects sway bar angle to function properly
- Sold as a pair, 1 needed per vehicle
$100.00
In StockDescription
Dobinsons Spring & Suspension front Swaybar Extensions to suit 2″ to 6″ of lift on Toyota Land Cruiser 80 series, only 9/1991+ models. Also suits LJ78/79, RJ77, KZJ78. These are fixed brackets once installed and will take the pressure off your sway bar and sway bar bushings, allowing them to work properly.
Corrects the position of the sway bar when the vehicle is lifted 2″ or more, providing better handling.
NOTE: These are sold as a pair.
For suspension lift kits between 75mm/3″ and 90mm/3.5″ castor correction is required, and also adjustable panhard rods are highly recommended. For customers wanting to maximize the off-road performance extended sway bar links and extended brake lines are also recommended. Extending the vehicles bump stops and driveshaft modification may also be required depending on the application.
For suspension lift kits exceeding 90mm/3.5″ considerable alignment parts are required. Castor correction, adjustable panhard rods, sway bar extensions, extended bump stops, extended brake lines, gearbox spacing, driveshaft modification, adjustable/modified rear trailing arms and adjustable steering arm modifications are required along with other driveline, suspension and steering modifications which may also be required.
Note: For Off Road Use Only
Vehicle Fitment:
1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series
1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series
1995 Lexus LX450
1996 Lexus LX450
1997 Lexus LX450
7 reviews for Dobinsons SE59-516 Front Sway Bar Extension Set | Land Cruiser 70 and 80 Series
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons C59-300 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- This is a comparable option to OME 2884 coils, which are 390mm free height, 16mm wire, 590LBF/in spring rate
(15 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Greasable Bolt Pair | SP59-060
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
- 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end
(12 reviews) -
Tacoma 3rd Gen (2016-2023)FREE SHIPPING
within 48 US StatesDobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- All lift heights are based on the baseline of 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. A 3″ front lift is 23″ for example. Some Tacoma’s come with 1″ lift from the factory
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
Dobinsons
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/INÂ variable spring rate
- Rear Long Travel Coils Installation Guide
(15 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page
Aaron (verified owner) –
Very fast delivery.
Charles (verified owner) –
*****
Bryan (verified owner) –
Good quality, really nice.
Stephen (verified owner) –
Very good customer service, super friendly.
Travis (verified owner) –
I received it really fast.
Justin (verified owner) –
5 Stars!!
James (verified owner) –
Good quality, really nice.