Your cart is currently empty!
Dobinsons SE19-570 Front Sway Bar Link Set
- For Ford Ranger 2019-2023 USA Spec models and International Model Ford Ranger 2018-2022
- Use with Dobinsons lift heights of 1.75″ or more
- Black with all hardware supplied
- Simple bolt-on design
- Fixed length, 290mm (11.42″) from center to center of ball joints
- Reduces bushing wear and corrects sway bar angle to function properly
- Prevents sway bar from contacting where it shouldn’t when running longer travel struts, like Dobinsons
- Sold as a pair, 1 needed per vehicle
$200.00
In StockDescription
Dobinsons Spring & Suspension front Swaybar Link Set to suit Ford Ranger 2019-2023 USA Spec and 2018-2022 Ford Ranger PX3 International models. These are fixed length links that once installed will take the pressure off your sway bar and sway bar bushings, allowing them to work properly. These must be installed when running the Dobinsons IMS front lift kit due to the extended length of the struts.
Ford Ranger Sway bar link kit, sway bar links for Ford Ranger front ends.
Corrects the position of the sway bar when the vehicle is lifted 1.75″ or more, providing better handling.
NOTE: These are sold as a pair. A Ford Ranger only needs to order 1.
Vehicle Fitment:
2019 Ford Ranger
2020 Ford Ranger
2021 Ford Ranger
2022 Ford Ranger
2023 Ford Ranger
2018 Ford Ranger International Model
2019 Ford Ranger International Model
2020 Ford Ranger International Model
2021 Ford Ranger International Model
2022 Ford Ranger International Model
3 reviews for Dobinsons SE19-570 Front Sway Bar Link Set
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons Front 30mm Coil Spacer (Single)
- Suits:
- Land Cruiser 80 Series and Lexus LX450
- Range Rover 1971-1988
- Land Rover Discovery Series I 1991-1999
- Defender 90 1984-1990
- Defender 110 1984-1992
- Defender 110 + 130 1992-2001
- Defender 110 + 130 2007-2019
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(4 reviews) - Suits:
-
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C59-175V – 2.0″ lift with up to 660LBS, or 3.0″ lift with up to 330LBS
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- C59-617V 4″ Lift with 200-400LBS Load (Flexi coils, variable rate)
- C59-309 – 4″ lift with 110-220lbs weight
- C97-485VT – 4.0″ with a heavy load rear end of 300-400LBS of added weight (variable dual rate long travel)
- C59-313 – 4″ lift with 400-750lbs weight
- C59-317 – 6″ lift with stock weight
- C59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Toyota Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews) -
Dobinsons
Dobinsons Greasable Bolt Pair | SP59-060
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
- 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end
(12 reviews)
Bryan (verified owner) –
Value for money, super satisfied.
Travis (verified owner) –
I received it really fast.
Paul (verified owner) –
*****