Your cart is currently empty!
Dobinsons SE19-570 Front Sway Bar Link Set
- For Ford Ranger 2019-2023 USA Spec models and International Model Ford Ranger 2018-2022
- Use with Dobinsons lift heights of 1.75″ or more
- Black with all hardware supplied
- Simple bolt-on design
- Fixed length, 290mm (11.42″) from center to center of ball joints
- Reduces bushing wear and corrects sway bar angle to function properly
- Prevents sway bar from contacting where it shouldn’t when running longer travel struts, like Dobinsons
- Sold as a pair, 1 needed per vehicle
$200.00
In StockDescription
Dobinsons Spring & Suspension front Swaybar Link Set to suit Ford Ranger 2019-2023 USA Spec and 2018-2022 Ford Ranger PX3 International models. These are fixed length links that once installed will take the pressure off your sway bar and sway bar bushings, allowing them to work properly. These must be installed when running the Dobinsons IMS front lift kit due to the extended length of the struts.
Ford Ranger Sway bar link kit, sway bar links for Ford Ranger front ends.
Corrects the position of the sway bar when the vehicle is lifted 1.75″ or more, providing better handling.
NOTE: These are sold as a pair. A Ford Ranger only needs to order 1.
Vehicle Fitment:
2019 Ford Ranger
2020 Ford Ranger
2021 Ford Ranger
2022 Ford Ranger
2023 Ford Ranger
2018 Ford Ranger International Model
2019 Ford Ranger International Model
2020 Ford Ranger International Model
2021 Ford Ranger International Model
2022 Ford Ranger International Model
3 reviews for Dobinsons SE19-570 Front Sway Bar Link Set
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews) -
Dobinsons
Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
(14 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews)
Bryan (verified owner) –
Value for money, super satisfied.
Travis (verified owner) –
I received it really fast.
Paul (verified owner) –
*****