Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Amigo

(3 customer reviews)
  • For Isuzu Amigo models – must measure before ordering
  • Increased spring rate to improve handling and lift front end
  • Powder coated black for a long lasting finish
  • Replaces OE torsion bars without modification
  • Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride

From $305.00

In Stock
Select Torsion Bars based on your OE measurement
You MUST measure your stock torsion bar length before ordering here.  Isuzu Amigo's had a few variations worldwide on which torsion bars were used on each vehicle, so it's required to measure yours first to ensure you order the correct size.
Here are the options and total length of each.
TB21-1547 - 1000mm (39.37")
TB21-1549 - 1220mm (48.03")
TB21-1550 - 1145mm (45.08")
SKU: TB-AMIGO Categories: , , , Tag: Brand:

Description

Dobinsons Heavy Duty Torsion Bar set for Isuzu Amigo

You MUST measure your stock torsion bar length before ordering here.  Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.

Here are the options and total length of each.

TB21-1547 – 1000mm (39.37″)

TB21-1549 – 1220mm (48.03″)

TB21-1550 – 1145mm (45.08″)

Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.

Dobinsons Isuzu Amigo torsion bars feature an increased bar diameter,thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Dobinsons Isuzu Amigo torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.

A thick durable powdercoat provides protection against corrosion.

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their Isuzu Amigo torsion bars directionally preset and scragged to prevent sagging and breakage.

Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL

When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

 

INCREASED SPRING RATE 

 

Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Simple Fitment

Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

Directionally Preset & Scragged

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.

Durable Powdercoat Finish

A thick durable powdercoat provides protection against corrosion.

Cold Rolled Splines

Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.

Potential Vehicle Fitment:

1995 Isuzu Amigo
1996 Isuzu Amigo
1997 Isuzu Amigo
1998 Isuzu Amigo
1999 Isuzu Amigo
2000 Isuzu Amigo
2001 Isuzu Amigo
2002 Isuzu Amigo

Additional information

Selection Torsion Bars

TB21-1547 – 1000mm (39.37"), TB21-1549 – 1220mm (48.03"), TB21-1550 – 1145mm (45.08")

3 reviews for Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Amigo

  1. Ryan (verified owner)

    Very good customer service, super friendly.

  2. Joshua (verified owner)

    Would definitely buy from this site again.

  3. Aaron (verified owner)

    This is my go-to now for off road parts.

Add a review