Dobinsons Tacoma L59-110-R Medium leaf Springs Only

Dobinsons HJ47-7L-F Front Leaf Springs Pair for 80+ FJ40 BJ40 35mm eyes – Heavy Load

  • Suits 1980+ FJ40 and BJ40 models with 35mm eyes.
  • Gives 45mm with 300LBS+ constant front end weight
  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Design features include Drawn, tapered and thinned leaf ends
  • Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
  • Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
  • Sold as a pair – bushings, u-bolts and all other parts sold separately
  • Photo for illustration purposes only

$430.00

In Stock
Share (0)
Total: 0 Total: 0
EAN: 9332670061830 SKU: HJ47-7L-F Categories: , , , , , Brand:

Description

Dobinsons HJ47-7L-F pair of leaf springs for the front of the Toyota 40 Series from 1980 to 1984 with 35mm eye sizes and they give 45mm (1.75″) of lift with a heavy load front end of at least 300LBS or for someone with a heavier engine swap than stock.

Dobinsons HJ47-7L-F leaf springs are manufactured from only the highest quality raw materials. We understand the importance of selecting not only the highest quality spring steel, but also the correct grade that will give the longest life under the harshest conditions.

Dobinsons Leaf Spring Specs and detailsOur design engineers ensure that all our leaf springs are designed specifically for each vehicle model, with consideration given to the load and height requirements for each application.

Note: Greasable bush kits, greasable pins, and u-bolts are available separately. These do not come with bushings.  You can use stock OE bushings in these leaf springs if you wish, but using old bushings can be very difficult, as removing them from the OE springs is hard to do without damaging them.  New bushings should be installed with new leaf springs, and U-bolts should also be replaced as they are a one-time-use item, torque to yield bolts, and should not be reused.

Photo is for illustration purposes only.

Related products

  • Dobinsons Square Top Ubolts
    Suspension

    Dobinsons Rear U-Bolts – UB59-667K (2 Pairs)
    • Made from the highest quality raw materials to give years of life under the harshest conditions
    • Over 60 years of leaf spring design and manufacturing
    • Includes 4 U-bolts, enough for 1 vehicle
    • Requires 2″ lift leaf springs to ensure proper fitment
    • Photo for illustration purposes only.  These are square at the top
    • For Nissan Frontier D41 2022+ models, these UB59-667K suit the L59-002-R leaf springs only.  The heavier rated springs need the UB59-453-2K U-bolts.
    $90.00 Add to cart
  • Dobinsons MRA Strut
    • Dobinsons MRA Strut
    • Dobinsons MRA59-A700 and MRA59-A574 installed with resi mounts (1)
    • Dobinsons MRA59-A700 and MRA59-A574 installed with resi mounts (1)
    Exceptions
    Ships FREE !!
    within 48 US States

    Dobinsons MRA59-A700 3-Way Adjustable MRA Front Struts
    • Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 3″ of lift
    • 3-way adjustable valving – adjust high and low speed compression and rebound
    • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
    • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
    • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
    • 20 Stage Low Speed Compression – For creepy crawling and cornering
    • 15 Stage Rebound – Control your coils, prevent bucking
    • 50mm CNC Machined High Flow Billet Aluminum Race Piston
    • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
    • Upgraded 3 Stage FKM‐HNBR Sealing System
    • TSUGAMI™ CNC machined components for precise tolerances
    • Parker™ Braided High Pressure Hoses
    • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
    • T6 6061 Height Adjustable Spring Seat
    • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
    • 60mm Full 6063 aluminum remote reservoir
    • Lightweight CNC Machined Low Friction floating piston
    • High Quality O.E.M. Grade Natural Rubber Bushings
    • Single Piece Lower Leg
    • EDP Surface Protection
    • Direct Bolt-On Design
    • CNC TIG Precision Welded Body End Mounts
    • Fully Rebuildable Design
    • SOLD IN PAIRS
    • MRA59-A700 – 560mm extended, 420mm compressed
    • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
    • Full 2 year limited warranty, no set rebuild time period
    • Does not include coil springs or top mounts – sold separately
    • Instructions on setting coil seat height
    • Resi installation instructions
    $1,280.00 Add to cart
  • Dobinsons Twin Tube Suspension Kit
    • Dobinsons Twin Tube Suspension Kit
    • Lexus GX460
    • Dobinsons coilover color options
    GX460 (2010-2023)

    Dobinsons 1.5-3.5″ Lift Kit for Lexus GX460 2010 to 2023 (all options)
    • Every suspension option from Dobinsons to lift your Lexus GX460 all on one page
    • Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
    • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • Coils are specifically suited to the additional accessory load (weight) on the vehicle
    • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs
    • You can choose to upgrade to the higher end IMS or MRA struts and shocks on this page in the drop down menus
    From $1,200.00 Select options
    • Dobinsons Twin Tube Shocks features and benefits
    Dobinsons

    Dobinsons GS59-574 Pair Extended Travel Struts FJ Cruiser 2010+ 4Runner 2010+ GX460
    • Suits Toyota FJ Cruiser 2010+ and Toyota 4Runner 5th Gen 2010-2024, and Lexus GX460 (all years) for 2.0″ to 3.5″ of lift
    • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
    • Superior Design, thicker walls, longer travel
    • Japanese NOK Multi-Lip seals
    • Fuchs German shock absorber oil
    • Natural Rubber Bushings for reduced noise vibration and flexibility
    • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
    • Matched to compliment Dobinsons Complete Suspension Systems
    • Dobinsons GS59-574 Specifications: Extended Travel – 575mm extended, 430mm compressed, 54mm body size
    • Dobinsons GS59-574 struts add 1″ to the listed coil spring that are used with them, due to the raised coil seat.  They are also longer than stock for taller lifts
    • Example: Use a 2″ lift spring with these struts to get 3″ of lift
    $350.00 Select options