Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons IMS29-50742 Front IMS Struts Pair | Jeep Grand Cherokee WK2 2016-2022
- Fits Jeep Grand Cherokee WK2 from 2016-2022, where the sway bar attaches at the base of the strut
- Does not suit Quadralift vehicles (air ride suspension)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- ****Coil seat should be set at 540mm(21.25″) from the strut bushing eye. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.*****
- Struts only, sold as a pair – the coils are sold separately
$770.00
In Stock
SKU: IMS29-50742LH+IMS29-50742RH
Categories: Dobinsons, Exceptions, IMS Monotube, Struts and Shocks, Suspension, WK2 Grand Cherokee (2011-2022)
Brand: Dobinsons Spring & Suspension
Description
Pair of front Dobinsons IMS29-50742 LH + IMS29-50742 RH Internal Reservoir Monotube adjustable height struts (does not include coils or top mounts) – Fits Jeep Grand Cherokee WK2 from 2016-2022, where the sway bar attaches at the base of the strut
- Does not suit Quadralift vehicles (air ride suspension)
These have an adjustable lower coil seat to fine tune lift height or any lean in the vehicle. These do not come with coil springs or top mounts. They do come with new rubber bushings and required washers for installation, but in some cases you reuse the originals with the strut mount. Select Dobinsons coil springs based on desired lift height and load capacity. Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.
Link to Youtube video: https://youtu.be/Npfx40VD3kM
Link to shop for suitable front coils: https://exitoffroad.com/product-category/suspension/coil-springs/
Dobinsons IMS Monotube IMS29-50742 LH + IMS29-50742 RH Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilizing the Monotube design, Dobinsons Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Vehicle Fitment:
2016 Jeep Grand Cherokee Front Struts
2017 Jeep Grand Cherokee Front Struts
2018 Jeep Grand Cherokee Front Struts
2019 Jeep Grand Cherokee Front Struts
2020 Jeep Grand Cherokee Front Struts
2021 Jeep Grand Cherokee Front Struts
2022 Jeep Grand Cherokee Front Struts
14 reviews for Dobinsons IMS29-50742 Front IMS Struts Pair | Jeep Grand Cherokee WK2 2016-2022
You must be logged in to post a review.
You may also like…
-
WK2 Grand Cherokee (2011-2022)FREE SHIPPING
within 48 US StatesDobinsons IMS Lift Kit for Jeep Grand Cherokee WK2 for 2011-2022
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Superior Designed IMS (Internal reservoir Monotube Shocks) with Internal Floating Piston – huge 56mm bore size for maximum dampening control
- Adjustable height front struts to fine tune lift height and leveling if needed
- 50mm hi-flow CNC 6061 Billet alloy piston
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Not all coil options are black. Some may be supplied in teal
- To check if your WK2 has Nivomat rear shocks measure the original shock diameter.
Standard – 51mm
Nivomat – 63mm - Vehicles with Nivomat rear shocks are not compatible with our rear shocks (IMS29-50733), In order to achieve proper fitment, these OE Jeep part numbers below are required that you will have to buy from Jeep
- Shock mount plate P/# 5181844AA
- Shock mount P/# 68029590AE
- Bumper jounce P/# 68029591AC
(8 reviews)
Related products
-
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
Dobinsons
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/IN variable spring rate
(15 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews)
Stephen (verified owner) –
Good quality, really nice.
Jason (verified owner) –
I received it really fast.
Jason (verified owner) –
Just what I needed.
Timothy (verified owner) –
Value for money, super satisfied.
Edward (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Jason (verified owner) –
Just what I needed.
Robert (verified owner) –
Very good customer service, super friendly.
Joshua (verified owner) –
Good quality, really nice.
Mark (verified owner) –
Very fast delivery.
Jacob (verified owner) –
Value for money, super satisfied.
Robert (verified owner) –
Would definitely buy from this site again.
Travis (verified owner) –
Value for money, super satisfied.
Joshua (verified owner) –
Very fast delivery.
James (verified owner) –
I received it really fast.