Dobinsons MRA component list features what is inside MRA kit

Dobinsons MRA Chart Specs on the dyno MRA kit

Dobinsons MRA low and high speed compression adjusters on remote resi

Dobinsons Mazda BT-50 MRA Lift Kit for 2011-2018 | 2-3″ Lift

Name: Dobinsons Mazda BT-50 MRA Lift Kit for 2011-2018 | 2-3" Lift
Brand: Dobinsons Spring &amp; Suspension
SKU: MAZDABT50MRAKIT
Availability: InStock
Rating: 5.00 (4 reviews)

Rated 5.00 out of 5 based on 4 customer ratings

(4 customer reviews)

Suits Double Cab 4×4 2011-2018 Mazda BT-50 4×4 Trucks
Lifts 2-3″ over original stock height, depending what parts you choose
If you want to lift and level the truck, go for 3″ up front and 2″ in the rear. That removes the rake of the truck
Lifting the front and rear by the same amount keeps the factory rake
Suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
Dobinsons MRA front struts are height adjustable by a fully threaded body
3-way adjustable valving – adjust high and low speed compression and rebound
Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
20 Stage Low Speed Compression – For creepy crawling and cornering
15 Stage Rebound – Control your coils, prevent bucking
50mm CNC Machined High Flow Billet Aluminum Race Piston
3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
Upgraded 3 Stage FKM‐HNBR Sealing System
TSUGAMI™ CNC machined components for precise tolerances
Parker™ Braided High Pressure Hoses
5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
T6 6061 Height Adjustable Spring Seat up front
Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
60mm Full 6063 aluminum remote reservoir
Lightweight CNC Machined Low Friction floating piston
High Quality O.E.M. Grade Natural Rubber Bushings
Single Piece Lower Leg
EDP Surface Protection
Direct Bolt-On Design
CNC TIG Precision Welded Body End Mounts
Fully Rebuildable Shock Design
Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
Choose your desired suspension parts to build the kit best suited to your weight
Photos for reference only, actual product may appear different
No parts are included if you don’t include them from the menu down below. The photo shows a complete suspension kit if all parts are purchased

From $270.00

In Stock

Front Coil Springs

These specs are for a 3.2L Diesel Double Cab 4x4 - Choose what lift height you want based on what added weight is on the truck. 3" coils require extra parts
C19-422 - 40mm lift with stock weight
C19-424 - 55mm lift with stock weight, 40mm lift with 50-90KGS added front end weight
C19-474 - 55mm lift with 50-100KGS added front end weight
C19-516 - 3.0" lift with stock weight
C19-518 - 3.0" lift with 50-100KGS added front end weight

Front Struts

Front Strut Mounts

You can either reuse the OEM strut mounts, or order these to preassemble the struts and coils prior to installation

Front Strut Assembly

If you want us to preassemble the front struts, coils and strut mounts, add that charge here. Must order the strut mounts for these to be able to be assembled

Front Lift Height

If you've chosen the IMS or MRA front struts with adjustable height coil seats, as well as new strut mounts and the labor charge for assembly, let us know what added height you want with the coils

Front Upper Control Arms (UCA's)

A lift height above 2" requires new UCA's for a proper wheel alignment

Rear Shocks

Rear Lift Blocks

Instead of changing out your leaf springs and bushings, you can use these lift blocks. They come with the necessary U-Bolts to mount them as well

Select Rear Leaf Springs

Choose the leaf springs that match your added weight and desired lift height
L19-135-RP - Parabolic - 50mm lift with up to 150KG of load (comfort option)
L19-131-R - 40mm lift with up to 100KGS constant load (medium duty)
L19-132-R - 40mm lift with up to 280KGS constant load (heavy duty)
L19-133-R - 40mm lift with 500KGS constant load (super heavy duty)

Rear Leaf Spring Bushing Kit

Required if you're ordering leaf springs

Rear U-Bolts

These are required if you're ordering the leaf springs

Greasable Shackle Kit

The best way to grease your new greasable bushings is with this shackle kit to easily add grease and keep them riding as smooth as possible

Greasable Pin Kit

These go on the other end of the shackles, to be able to grease your greasable bushing kit

SKU: MAZDABT50MRAKIT Categories: BT-50 (2011-2020) - Intl Model, Dobinsons, Full Suspension Kits, Full Suspension Kits - BT-50 2011-2020, Suspension Brand: Dobinsons Spring & Suspension

Description
Reviews (4)

Description

Dobinsons complete Mazda BT-50 MRA Lift Kit suits 2011-2018 4×4 models sold outside the USA, with various options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. Contact us directly if you have questions before ordering.

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Mazda BT-50 MRA Lift Kit 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Built on the back of the race winning Monotube Remote Reservoir (MRR) shock absorbers, Dobinsons new range of MRR Adjustable shock absorbers combine the best in high performance race-bred Monotube technology, with an all new 3-way damping adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR shock absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.

The new 6063 honed aluminum reservoir, revised light-weight floating piston, Carbon Fibre/PTFE/Disulphide composite wear band, improved 3-stage sealing system and the ability to run lower gas pressure with the addition of the reservoir compression adjuster, have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and damping performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.

The Micro-polished, hard chromed and heat treated shock shaft, revised CNC aluminum high flow race piston, and DOM Seamless tubing body provides the ultimate in performance and off-road durability. The 3-way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable. Enjoy the ride…

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons™ Mazda BT-50 MRA Lift Kit coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Dobinsons Mazda BT-50 MRA Lift Kit leaf springs are manufactured from only the highest quality raw materials. We understand the importance of selecting not only the highest quality spring steel, but also the correct grade that will give the longest life under the harshest conditions.

Our design engineers ensure that all our leaf springs are designed specifically for each vehicle model, with consideration given to the load and height requirements for each application.

All parts are also sold separately if you don’t need a full kit – Here

Vehicle Fitment:

2011 Mazda BT-50
2012 Mazda BT-50
2013 Mazda BT-50
2014 Mazda BT-50
2015 Mazda BT-50
2016 Mazda BT-50
2017 Mazda BT-50
2018 Mazda BT-50
2019 Mazda BT-50
2020 Mazda BT-50

4 reviews for Dobinsons Mazda BT-50 MRA Lift Kit for 2011-2018 | 2-3″ Lift

Rated 5 out of 5

Aaron (verified owner) – August 8, 2021

Very fast delivery.
Rated 5 out of 5

Sean (verified owner) – December 10, 2021

Good quality, really nice.
Rated 5 out of 5

Brian (verified owner) – July 16, 2023

Great description on the page, easy to understand what I was buying.
Rated 5 out of 5

Christopher (verified owner) – January 6, 2024

Exit Offroad really does know what they’re talking about, they have the best product pages.