Dobinsons Offset Aluminum Hawse Fairlead

Machined Aluminum
Offset fairlead to position the rope feed to the winch drum centered properly
Suits all ARB front bumpers that usually use a roller fairlead
If your bumper has the winch mounted feet-forward, and the bottom hole also goes through the fairlead, you’ll need this offset one
Narrow profile, doesn’t protrude

$105.00

In Stock

SKU: EW80-3824 Categories: Accessories, Dobinsons, Recovery, Winches Brand: Dobinsons Spring & Suspension

Description

Description

The Dobinsons offset aluminum hawse fairlead is used on pretty much ARB style front bumpers when running a synthetic winch line, and if the winch bolts feet-forward into the face of the bumper. The opening in some full size bumpers, and most ARB style bumpers is intended to have a roller fairlead and the holes for that are in a different position, requiring an offset fairlead so that the rope doesn’t contact the bumper edge when in use.

You may also like…

Factor 55
Ships FREE !!
within 48 US States
Factor 55 FlatLink Shackle Mount
- Double-shear pin and internal snap ring for an ultrasecure connection
- EPDM rubber guards are attached with four barbed tips; it cushions line stowage, protects fairleads and prevents rattling
- Precision machined from 6000 series aluminum
- Easy to install, FlatLink can be used with steel or synthetic winch lines up to 3/8” in diameter and works with common 3/4” shackles (pin and bow end) or soft shackles up to 3/4”
- The rope eye is retained in the FlatLink with a 5/8” diameter 6AI-4V grade V titanium
- Less than 1.75” of thick, when folded flat
- Max load rating: 16,000lbs, Ultimate failure : greater than 40,000lbs
- Weight: 23 oz.
- Engineered, Tested, and Made in USA. Patent pending
$146.00 Select options
Factor 55
Ships FREE !!
within 48 US States
Factor 55 ProLink Shackle Mount
- 5/8 inch diameter 6Al-4V titanium double shear pin and internal snap ring for an ultra-secure connection
- EPDM rubber guards are attached with four barbed tips and protects fairleads and prevents rattling, also protects alloy fairleads and cushions line stowage
- Precision machined from 6061-T6 Kaiser Aluminum round bar
- 1.2 inch shackle tab thickness reduces “shackle rattle”
- Works with steel or synthetic rope up to 3/8” diameter and eyes equipped with standard or tube thimbles up to 3/8” diameters.
- The rope eye is retained in the ProLink with a 5/8”-diameter grade 6AI-4V grade V
- Stress analyzed using COSMOS FEA and destructively tested for confirmation
- Max load rating: 16,000 lbs.
- Weight: 24 oz
- Engineered, Tested, and Made in USA. Patent pending
$157.00 Select options