Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22

Related products

• 

  • 
  • 

  Bump Stops

  Ships FREE !!
  within 48 US States

  Dobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit

  • Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
  • Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
  • HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
  • CNC Machined 50mm Billet Aluminum Piston
  • EDP Coated 3mm Thick 56mm Steel Body
  • Threaded Body For Height Adjustment
  • Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
  • 30mm Micro Polished Hard Chrome Shaft
  • Slow Rebound Valving To Prevent Bucking
  • Removable Dust Cover Boot For Stealth Appearance
  • Fully Rebuildable & Tunable
  • O-Ring Travel Indicator
  • Heavy Duty Extreme-Race style Triple Seal Design
  • Nitrogen Gas Charged & Tunable (100 to 300 PSI)
  • Pre-charged to 150 PSI
  • Extra Short Dead Lengths For Compact Fitment
  • Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
  • Cans have 3mm walls for increased strength
  • Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
  • Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
  • Custom fitting and welding is required
  • Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma

  From $1,090.00 Select options
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60710 IFP Front Struts for Toyota Tundra and Sequoia

  • For 1.75-3.0″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Features clip adjustment levels for fine tuning of lift height
  • 4 Clip height settings. Lowest height is stock/OE height.  Each clip height adds approximately 1/2″ of lift.  Use clip heights to fine tune lift height or offset for vehicle lean
  • Recommended to run with Dobinsons coils.  OE coils may contact the thicker shock body
  • TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
  • ASSEMBLY INSTRUCTIONS
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • 615mm extended, 445mm compressed lengths
  • Full 2 year limited warranty, no set rebuild time period
  • If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also

  $720.00 Add to cart
• 

  • 
  • 
  • 

  Dirt King Fabrication

  Dirt King Toyota Tundra Tubular Ball Joint UCA’s – Tundra Sequoia

  • Suits 2007-2021 model Toyota Tundra 2nd Gens, and 2008-2022 Sequoia 2nd Gens
  • Proudly made in the USA
  • CAD designed, Formed steel bushing gussets
  • Constructed with 4130 chromoly tubing
  • Preassembled with heavy duty Moog ball joints for fast installation
  • Grease fitting ports for easy servicing, Zinc plated components for corrosion resistance
  • Professionally MIG welded, powder coated black

  $599.00 Select options
• 

  • 
  • 

  Firestone

  Firestone 4164 Coil-Rite Rear Helper Air Springs (Airbags) | 200 Series and Sequoia

  • Firestone 4164 Suits Toyota Landcruiser 200 Series and Lexus LX570 2008-2020, Toyota Sequoia 2008-2022 with coil springs in the rear
  • Complete kit – 1 per vehicle
  • Inserts inside your rear coil springs to add additional load support
  • Manually inflate or deflate the air bags to add or remove support or height
  • Perfect for people who tow, or regularly load up fully and need additional height or support
  • Works with all Dobinsons rear coils for these vehicles
  • Works with 0-1.5″ of lift
  • Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
  • Installation Manual, Click Here

  $144.12 Add to cart