DOBINSONS 15MM REAR SPACER | 4RUNNER FJ CRUISER LEXUS GX470 GX460

Dobinsons 15mm Rear Spacer | 4Runner FJ Cruiser Lexus GX470 GX460

(18 customer reviews)
  • Suits various vehicles, as listed below
  • High Quality Polyurethane, maintains height over time
  • Fits on top of OE isolator, below the frame mount
  • Sold as 1 piece
  • Lasts longer than rubber
  • Easy to add lift height to correct for vehicle lean
  • Adds 15mm (0.6″) of lift

$40.00

In Stock
Share (1)
Total: 0 Total: 1
EAN: 9332670066811 SKU: PS59-4025 Categories: , , , , , , , , , , , Tag: Brand:

Description

This is a single rear poly coil spacer to help correct for vehicle lean once a vehicle has been lifted, if a lean exists.  It is 15mm (0.6″) thick.  This will add the same amount of lift as its thickness to help level up the vehicle.  These CANNOT be stacked, only 1 can be used per coil spring.

While some people have an issue with a spacer, they need to remember that to level a vehicle out from left to right, a shim like this is what is normally used.  A shim and a small spacer are the same thing, specifically to level out the vehicle.  A “coil spacer lift kit” that many brands sell are offered to cheaply add height to a vehicle by using 1″, 2″, or sometimes 3″ thick spacers on top of original suspension, but that’s not the objective here.

This rear spacer will suit all rear coil springs that use the factory top rubber coil spring isolator, for these vehicles:

Toyota 4th Gen 4Runner – 2003 to 2009

Toyota 5th Gen 4Runner – 2010 to 2024

Toyota FJ Cruiser – all years

Lexus GX470 – all years

Lexus GX460 – all years

Toyota Prado 120 – all years

Toyota Prado 150 – all years

This rear spacer can also be used on vehicles with KDSS, as offset height rear coils, or a spacer on top of one side if even height coils are used, is recommended.  When a vehicle with KDSS is lifted 2″ or more, the fixed side sway bar link has become too short and “holds up” that side of the vehicle and ends up causing a lean.  By adding this small lean spacer on top of the passenger side on KDSS vehicles, it helps push that side back down and correct the vehicle lean so that the vehicle sits correctly from left to right.  Factory vehicles do come with a lean, and most people don’t ever  notice it until after they have done a lift and realized just how much the vehicle can be different from one side to another.  You would either run one of these spacers or the Treaty Oak KDSS spacer kit to help correct the geometry when lifted.

Remember: New Toyota vehicles come with a 1/4″ to 1/2″ lean from the factory, so anything within that range is considered “OK”.

To see coil springs these can work with, click here: https://exitoffroad.com/product-category/suspension/coil-springs/

Vehicle Fitment:

2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner

2024 Toyota 4Runner

2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470

2010 Lexus GX460
2011 Lexus GX460
2012 Lexus GX460
2013 Lexus GX460
2014 Lexus GX460
2015 Lexus GX460
2016 Lexus GX460
2017 Lexus GX460
2018 Lexus GX460
2019 Lexus GX460
2020 Lexus GX460
2021 Lexus GX460
2022 Lexus GX460
2023 Lexus GX460

2006 Toyota FJ Cruiser
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
2015 Toyota FJ Cruiser
2016 Toyota FJ Cruiser

18 reviews for Dobinsons 15mm Rear Spacer | 4Runner FJ Cruiser Lexus GX470 GX460

  1. Bryan (verified owner) –

    Great description on the page, easy to understand what I was buying.

  2. Michael (verified owner) –

    Great description on the page, easy to understand what I was buying.

  3. David (verified owner) –

    Would definitely buy from this site again.

  4. Robert (verified owner) –

    5 Stars!!

  5. James (verified owner) –

    Good quality, really nice.

  6. Justin (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  7. Bradley (verified owner) –

    Very good customer service, super friendly.

  8. Sean (verified owner) –

    Value for money, super satisfied.

  9. James (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  10. Kevin (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  11. Jesse (verified owner) –

    Just what I needed.

  12. Joshua (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  13. Mark (verified owner) –

    Good quality, really nice.

  14. Bradley (verified owner) –

    Good quality, really nice.

  15. Adam (verified owner) –

    5 Stars!!

  16. Daniel (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  17. James (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  18. Thomas (verified owner) –

    It’s exactly what I wanted.

Add a review

Related products

  • Dobinsons Diff Drop Kit for Toyotas DD59-527K
    • Dobinsons Diff Drop Kit for Toyotas DD59-527K
    • Dobinsons DD59-527K diff drop kit installed on Toyota 4runner Tacoma FJ Cruiser GX470 GX460
    Dobinsons

    Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
    • Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
    • Keeps CV angles at a good working angle
    • Suitable for lifts over 2.0″.  There’s really no benefit to adding them if there’s less lift than 2.0″
    • Includes all necessary hardware, including machined spacers and nuts/bolts
    • Includes 2 different lengths of the long bolts as some vehicles need them longer than others
    • Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
    • Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
    • Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
    • Installation Instructions
    (17 reviews)
    $60.00 Add to cart
  • Dobinsons 4Runner drawers installed in a 5th Gen 4Runner
    • Dobinsons 4Runner drawers installed in a 5th Gen 4Runner
    • Dobinsons 4Runner Drawers | Toyota 5th Gen 4Runner 2010-2024
    • Dobinsons 4Runner Drawers | Toyota 5th Gen 4Runner 2010-2024
    Accessories

    Dobinsons 4Runner Drawers | Toyota 5th Gen 4Runner 2010-2024
    • One of the strongest and best looking drawer systems out there for the 5th Gen 4Runners!!
    • 1.6mm Zinc Plated Robust Steel Construction
    • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
    • Built-in Heavy-Duty Fridge Slide
    • 8 x Heavy Duty Stainless Steel Tie Down Points
    • Comprehensive outer wing trim kit to provide a factory fit (optional)
    • Installation of drawers REQUIRES drilling and bolting through floor.
    • Vehicle Specific Instructions – 4Runner 5th Gen
    • Any existing sliding deck must be removed prior to drawer installation.
    • Aluminum Edging Protection, Heavy duty lockable latches.
    • Sliding portion is not changeable from one side to the other.
    • Not compatible with 3rd row seat installed.
    • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
    • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address
    (13 reviews)
    From $1,465.00 Select options
  • Dobinsons rear coil springs in teal color
    • Dobinsons rear coil springs in teal color
    • Black Dobinsons Coils color
    • Red Dobinsons Coils color
    Dobinsons

    Dobinsons C59-505 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 405mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
    • Add a PS59-4025 trim spacer if used with KDSS
    (22 reviews)
    $270.00 Select options This product has multiple variants. The options may be chosen on the product page
  • DOBINSONS WA59-522K ADJUSTABLE REAR UPPER TRAILING ARMS | 4RUNNER FJ CRUISER GX470 GX460
    • DOBINSONS WA59-522K ADJUSTABLE REAR UPPER TRAILING ARMS | 4RUNNER FJ CRUISER GX470 GX460
    • Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460 vs stock
    Dobinsons

    Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
    • Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
    • Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
    • Zinc plated, then powder coated black, for the ultimate finish and protection
    • Instructions written down below in the description
    (12 reviews)
    $345.00 Add to cart