Dobinsons Rear Adjustable Hydro Bump Stop Kit for Toyota 200 Series Land Cruiser

Ships FREE !!
within 48 US States

Dobinsons Rear Adjustable Hydro Bump Stop Kit | 200 + 300 Series Land Cruiser

Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
Suits the Rear of Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 and 2022+ Land Cruiser 300 Series
CNC Machined 50mm Billet Aluminum Piston
EDP Coated 3mm Thick 56mm Steel Body
Threaded Body For Height Adjustment to adjust when the stop will engage
Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
30mm Micro Polished Hard Chrome Shaft
Slow Rebound Valving To Prevent Bucking
Removable Dust Cover Boot For Stealth Appearance
Fully Rebuildable & Tunable
O-Ring Travel Indicator
Heavy Duty Extreme-Race style Triple Seal Design
Nitrogen Gas Charged & Tunable (100 to 300 PSI)
Pre-charged to 110 PSI
Extra Short Dead Lengths For Compact Fitment
Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
Kit Includes:
- HBS59-013FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
Installation Instructions

$940.00

In Stock

SKU: HBS59-013FK Categories: 200 Series Land Cruiser (2008-2021), 200 Series Land Cruiser ARMORED, 300 Series Land Cruiser (2021+), Bump Stops, Bump Stops - 200 Series, Dobinsons, Performance Upgrades - 200 Series, Suspension Tags: air bumps, hbs, hydro, hydrobump, hydrobumps Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons Rear Adjustable Hydro Bumps Kit (hydraulic bump stops kit) for Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 and 2022+ Land Cruiser 300 Series. Will only suit vehicle with coil spring rear ends, no airbags, and cannot work in conjunction with aftermarket airbag kits that fit inside the coil springs. This hydraulic bump stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection. The Dobinsons Rear Adjustable Hydro Bumps Stop kit also retains the original external bump stop on the frame, and the kit comes with spacer blocks to lower the original bump stop down to meet the same bottom-out level as the new hydraulic bumps. You can replace the original frame-mounted bump stop with an aftermarket one if you’d like. This hydro bumps stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection, in addition to setting the bump stop gap for long travel shocks, increased tire clearance, or whatever else you may need to restrict or free up the amount of bump stop gap that your Land Cruiser has. The adjustable hydro bumps can easily spin on their threaded body to raise up or down in the mounts provided so that you can tune in the height quite easily. You’ll possibly have to take the coil out of the way to get in there and accurately set and adjust the height.

Dobinsons rich racing history has produced the line of IMS and MRA shock absorbers and this monotube technology has now been passed into the new hydro bump stop line. The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each hydraulic product to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

To see all bump stops that Exit Offroad offer, check it out here: Bump Stops Category

Suits all these vehicles:

2008 Toyota Land Cruiser 200 Series
2009 Toyota Land Cruiser 200 Series
2010 Toyota Land Cruiser 200 Series
2011 Toyota Land Cruiser 200 Series
2012 Toyota Land Cruiser 200 Series
2013 Toyota Land Cruiser 200 Series
2014 Toyota Land Cruiser 200 Series
2015 Toyota Land Cruiser 200 Series
2016 Toyota Land Cruiser 200 Series
2017 Toyota Land Cruiser 200 Series
2018 Toyota Land Cruiser 200 Series
2019 Toyota Land Cruiser 200 Series
2020 Toyota Land Cruiser 200 Series
2021 Toyota Land Cruiser 200 Series

2008 Lexus LX570
2009 Lexus LX570
2010 Lexus LX570
2011 Lexus LX570
2012 Lexus LX570
2013 Lexus LX570
2014 Lexus LX570
2015 Lexus LX570
2016 Lexus LX570
2017 Lexus LX570
2018 Lexus LX570
2019 Lexus LX570
2020 Lexus LX570
2021 Lexus LX570

2022 Toyota Land Cruiser 300 Series

2023 Toyota Land Cruiser 300 Series

2024 Toyota Land Cruiser 300 Series

Related products

Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
$90.00 Add to cart
On Backorder
Exceptions
Ships FREE !!
within 48 US States
ETA is July 2024
Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart
Dobinsons
Dobinsons C59-701V Rear UHD Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 500mm free height, 17mm wire diameter, 210-245LBF/IN variable spring Rate
$305.00 Select options
Exceptions
Ships FREE !!
within 48 US States
Dobinsons MRA59-A700 3-Way Adjustable MRA Front Struts
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 3″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- MRA59-A700 – 560mm extended, 420mm compressed
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Resi installation instructions
$1,280.00 Add to cart