“Dobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s” has been added to your cart. Continue shopping
You may be interested in…
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons 15mm Rear Spacer | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits various vehicles, as listed below
- High Quality Polyurethane, maintains height over time
- Fits on top of OE isolator, below the frame mount
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of lift
(18 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Raw Aluminum
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Raw aluminum
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Aluminum Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Trail-Gear
Rock Defense Low Profile 80 Series Front Bumper 1990-1997
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Made out of 1020 DOM (1.75″ X .120″ wall).
- Winch mount is made out of a .25″ CNC formed steel plate
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches
- Bumpers also features a shackle receiver
- Unpainted steel finish
- Will not work with roller type fairlead, requires hawse type fairlead
- Weight is 86LBS
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- Also sold with a stinger top tube added as pictured in some of the photos
- We offer a large variety of Winches as well
(9 reviews) -
Sale!Camping Equipment
Dobinsons 4×4 Full Extension Fridge Slide to suit 60 and 80L Fridges
- Suits most 60/80L fridges and coolers on the market today. Measure before ordering.
- Strong folded steel construction, rattle free, smooth sliding. Can lock at 2/3 open or completely open.
- Powder coated black for a long-lasting finish, has in and out locking pin with 3 positions (closed, 2/3 open, and fully open)
- Includes 4 x Fridge straps, or you can bolt the feet of the fridge to the slide itself, eliminating the straps
- 150KG weight rating, 479 x 680mm internal dimensions, 425 x 705 x 90mm external dimensions
(5 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesTG Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Solid aircraft-grade 6061-T6 aluminum spacers
- Zinc-plated Grade 8 hardware
- Aluminum spacers and longer zinc-plated Class 8.8 bolts to move the stock skid plate down
- TRD Pro models may require different length bolts due to variations from Toyota
- Fits the following applications:
- Toyota Tacoma 2005-2023 (All Engines)
- Toyota FJ Cruiser 2007-2014 (All Engines)
- Toyota 4Runner 2003-2024 (All Engines)
- Lexus GX470 (all years)
- Lexus GX460 (all years)
- Toyota Hilux Vigo (all years)
- Toyota Hilux Revo (all years)
- Toyota Fortuner (all years)
- Made in USA
(9 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMEIcon Tubular Lower Trailing Arm Pair | 4Runner FJ Cruiser GX470 GX460 LC200
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Lexus LX570 and 200 Series 2008-2021
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- Offset lower link front pivots improve roll steer
- Tangent lower link barrel design reduces risk of off-road hangups
- Integrated OEM emergency brake bracket mount
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON’s lifetime warranty
- Sold as a Pair
- Installation Guide
- Warranty Info
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Steel Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews) -
Trail-Gear
Rock Defense Low Profile 80 Series Front Bumper w/Stinger 1990-1997
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Includes welded on stinger bar as the top tube
- Made out of 1020 DOM (1.75″ X .120″ wall).
- Winch mount is made out of a .25″ CNC formed steel plate
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches
- Bumpers also features a shackle receiver
- Unpainted steel finish
- Will not work with roller type fairlead, requires hawse type fairlead
- Weight is 94LBS
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- Also sold without a stinger top tube added as pictured in some of the photos
- We offer a large variety of Winches as well
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Land Cruiser 80 Series Rear Bumper with Tire and Jerry Can Carrier 1990-1997
- Suits all Toyota Land Cruiser 80 Series and Lexus LX450 from 1990-1997
- See product walk-around video down below
- Comes with Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire, on right side (US Passenger side)
- Includes single or dual Jerry Can Carrier on the left side (US Driver’s side)
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(15 reviews) -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
(4 reviews)
Cart totals
| Subtotal | $6,506.95 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $520.84 |
| Total | $7,464.79 |
