Dobinsons TORSION BAR LEAF spring lift kit
Dobinsons SP59-005 greasable pin
Dobinsons SP59-060 and SP59-005 use case with shank
Dobinsons shackle kit SK59-009 and SK59-010 side by side
SK59-009 Dobinsons Rear Greasable Shackle Kit for Toyota
Dobinsons SP59-060 greasable pin bolt kit for leaf springs

Dobinsons 2.0″ Lift Suspension Kit for Toyota Pickup 1986-8/1988

(8 customer reviews)
  • Suits 1986-8/1988 Toyota Pickups, with torsion bar IFS up front and leaf springs in the rear
  • After August 1988, the rear end design changed, and it uses different size leaf springs
  • Select all or which parts you would like for your vehicle, nothing is included if it is not selected
  • Choose from different shock types, twin tube or monotube
  • Comprehensive complete full suspension replacement when all parts are chosen
  • High quality components built to last and endure all climates
  • With all parts purchased, this will yield 2″ lift front and rear
  • Select a part from the drop down list, then click the small square that appears to the right of it to see the full specs of that product
  • Check the mounting bolt that holds the front of your leaf springs, there are 2 types Toyota used.  One looks like a regular bolt, usually 1986-1989, and the other has a wide flange head on it and a locating bolt to hold it in place.  See photos attached to show the 2 different types.
  • Main kit photo is for illustration purposes

From $945.00

In stock
Front Torsion Bars
Front Shocks
Choose from the yellow twin tube shocks or the black IMS monotube IFP shocks
Front Steering Damper
Add a front steering damper to replace the old worn out on and keep the steering nice and tight
Rear Leaf Springs
Sold in pairs. Match up the taller original spring with the taller new spring and install it on the same side
Rear Leaf Spring Bushing Kit
PB59-1033K is needed for all models, PB59-1116K is additionally needed on some
PB59-1033K fits all models that have a flanged front mounting leaf spring bolt with a locating bolt (see photos)
PB59-1116K fits regular front leaf spring mounting bolts without the flange and locating bolt (usually 1986-1989) - see photos
bush bushing pb59
1 × Dobinsons PB59-1033K Rear Greasable Poly Bush Kit for Toyota 1979-1989
$75.00

In stock

Dobinsons PB59-1033K Rear Greasable Poly Bush Kit for Toyota 1979-1989
Dobinsons leaf spring bushing 4 half bushings and 2 sleeves
1 × Dobinsons PB59-1116K Rear Greasable Poly Bush Kit for Toyota
$100.00

In stock

Dobinsons PB59-1116K Rear Greasable Poly Bush Kit for Toyota
Rear U-bolts
Comes as 2 pairs, enough for 2 leaf springs
Rear Shocks
GS59-649 - Comfort valved option for a light/empty rig
GS59-651 - Heavier duty valving for harder offroad use or heavy rigs
IMS59-50649 - IMS monotube shocks with IFP
MRA59-A649 - 3-way adjustable remote resi monotube shocks
Rear Greasable Shackle Kit
Only 1 kit needed per vehicle. See attached photo to show the shackle shape to confirm on your vehicle before purchasing
Rear Greasable Pin Kit
Check the front mounting bolt that holds your factory leaf springs first - see photo
Only 1 needed per vehicle
SP59-005 - Has a large flange with locating bolt in it (see photos) - only suits 1985 MODELS usually
SP59-060 - Looks like a regular bolt without a flange and locating bolt in it - usually 86-89 models

In stock

Share (0)
Total: 0 Total: 0
SKU: 86-88-PICKUP-KIT Categories: , , , , Brand:

Description

On this page you will find a collection of all the parts that consist of a complete Dobinsons suspension kit for a 1986 to August/1988 Toyota Pickups, with torsion bar IFS up front and leaf springs in the rear.  You can select whichever specific parts you want, or if you select everything, it will be the most complete kit to replace all the parts on your vehicle.

For more information on each product, click on the description of each item to go to that page, then you can come back to check out the other products.

Dobinsons Suspension Kit leaf springs are manufactured from only the highest quality raw materials. We understand the importance of selecting not only the highest quality spring steel, but also the correct grade that will give the longest life under the harshest conditions.

Our design engineers ensure that all our leaf springs are designed specifically for each vehicle model, with consideration given to the load and height requirements for each application.

Vehicle Fitment:

1986 Toyota Pickup

1987 Toyota Pickup

1988 Toyota Pickup (only up to 8/1988 build dates

8 reviews for Dobinsons 2.0″ Lift Suspension Kit for Toyota Pickup 1986-8/1988

  1. Timothy (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  2. Aaron (verified owner) –

    Good quality, really nice.

  3. Joseph (verified owner) –

    Just what I needed.

  4. Christopher (verified owner) –

    5 Stars!!

  5. Joshua (verified owner) –

    This is my go-to now for off road parts.

  6. Jesse (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  7. Paul (verified owner) –

    *****

  8. Paul (verified owner) –

    Very good customer service, super friendly.

Add a review

Related products

  • 80 Series Front Rear Panhard Rod 4Runner GX470 GX460 100 Series 200 Series
    Exceptions

    Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
    • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460, Prado 120 and 150
    • Replaces OE Rear Panhard Rod, adjustable to suit lift height
    • Re-centers the rear axle after lifting
    • Zinc plated steel and E-coated with high quality rubber bushes installed
    • Off-car adjustable, cannot be set while fully installed
    • For 45mm (1.75″) of lift or more
    • Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
    (11 reviews)
    $350.00 Add to cart
  • Dobinsons rear variable rate coil springs 3 different colors teal black red
    • Dobinsons rear variable rate coil springs 3 different colors teal black red
    • Dobinsons C59-701V installed
    Dobinsons

    Dobinsons C59-675V Rear Variable Rate Long Travel Coils – Pair
    • Vehicle Fitment list is down below
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 470mm free height, 16mm wire diameter, 157-230LBF/IN  variable spring rate
    • Rear Long Travel Coils Installation Guide
    (15 reviews)
    $350.00 Select options This product has multiple variants. The options may be chosen on the product page
  • Dobinsons Upper Control Arms UCAs
    • Dobinsons Upper Control Arms UCAs
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    Exceptions
    THIS SHIPS FREE
    within 48 US States

    Dobinsons Tubular UCA Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460
    • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460, Prado 120 and 150
    • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
    • Has 3 degrees of caster built in, no adjustability or settings required
    • Has more clearance around the ball joint than factory UCA’s for better tire clearance
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Works for any lift height, as factory alignment correction will be enhanced with these
    • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
    • Curved washers face outwards away from bushings during installation, per the product video
    • Product Video
    • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
    • Installation Guide
    • Replacement Ball Joints can be ordered here
    (8 reviews)
    $875.00 Add to cart
  • Dobinsons VT coils in teal black or red
    • Dobinsons VT coils in teal black or red
    • Dobinsons C59-613V 3 inch rear coils with IMS59-60687 4-5 inch IMS shocks
    • Dobinsons 3 inch flexi coils front and rear with 4-5 inch IMS shocks
    80 Series Land Cruiser (1990-1997)

    Dobinsons 0-6″ Lift 80 Series Rear Coil Spring Options | Toyota Land Cruiser 1990-1997 – Pair
    • Suits Land Cruiser 80 Series and Lexus LX450 1990-1997
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • To see the coil spring specifications of each part number, make a selection, then click the small square that appears to the right to open up the details of that part number
    • Choose what coil suits your vehicle and needs the best
      • Stock weight = All original bumpers, seats, empty cargo area daily, etc
      • Constant Load = Permanent bolted-on accessories like a rear bumper, drawers, roof rack, tent, etc
    • Linear Rate Coil Springs = They do not end in a V in the part number, they are the same spring rate throughout
    • Variable Rate Coil Springs = They end in a V in the part number, they start with a lighter spring rate that progresses heavier as weight is added or as it is compressed.  Variable and Progressive mean the same thing
    • C59-221V – Stock height, variable rate
    • C59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
    • C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ lift with stock weight
    • C59-169 – 1.75″ lift with up to 220lbs constant load
    • C59-171 – 2″ lift with 750lbs constant load, OR 3″ lift with 440lbs constant load
    • C59-175V – 2.0″ lift with up to 660LBS constant load, or 3.0″ lift with up to 330LBS constant load, variable rate
    • C97-147VT – 2.5″ lift with 440lbs constant load (lifts more with less weight), (variable dual rate long travel)
    • C59-167 – 2.5″ lift with up to 220lbs constant load, 2.0″ lift with 440lbs constant load
    • C59-185 – 3″ lift with up to 220LBS constant load, 2.5″ lift with 500LBS constant load, 2″ lift with 800LBS constant load
    • C59-153 – 3″ lift with 880LBS constant rear load
    • C59-613V – 3″ lift with up to 200 LBS constant load (Flexi coils, variable rate)
    • C97-145VT – 3.5″ lift with 400LBS+ heavy constant load (variable dual rate long travel)
    • C59-615V – 4″ lift with up to 200 LBS constant load (Flexi coils, variable rate)
    • C59-617V 4″ Lift with 200-400LBS constant load (Flexi coils, variable rate)
    • C59-309 – 4″ lift with 110-220lbs constant load
    • C97-485VT – 4.0″ lift with a heavy constant load rear end of 300-400LBS of added weight (variable dual rate long travel)
    • C59-313 – 4″ lift with 400-750lbs constant load
    • C59-317 – 6″ lift with stock weight
    • C59-319 – 6″ lift with 200LBS constant load
    • C59-311 – 6″ lift with 880LBS constant load
    • Sold in Pairs
    • Click HERE to see the FRONT coil options
    • Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
    • All lift heights are based on an OEM average stock height of 21″ rear center of hub up to fender (with flares) when new
    (6 reviews)
    From $300.00 Select options