Your cart is currently empty!
Dobinsons Sway Bar Relocation Kit | Tacoma FJ Cruiser GX470 4Runner
- Suits 2005-2023 Toyota Tacoma 4×4 models, 2003-2009 4Runner 4th Gen, 2006-2009 FJ Cruiser, Lexus GX470 (all years without KDSS)
- Lowers the stock front sway bar for better working angle
- Includes machined aluminum spacers
- Easy bolt-on installation
- Includes new correct grade longer hardware
- Recommended for lift heights of 2″ or more
$75.00
In StockDescription
This Tacoma sway bar drop bracket kit includes 2 machined aluminum spacers and necessary hardware to space down the stock sway bar on 2005-2023 Toyota Tacoma models, 2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser and Lexus GX470, putting it back to a proper working angle, and allowing each wheel to once again move more freely. These are a good idea to add when a vehicle is lifted 2″ or more to correct the sway bar angle. At 3″ or more, these should most definitely be added.
Instructions are simple on this Tacoma Sway bar Relocation Kit. Undo the stock sway bar mounts where it attaches to the frame. Place the Tacoma Sway bar drop spacer between the sway bar mount and the frame, and reattach the sway bar with the new supplied longer hardware, and you’re done.
Some people think this is done to keep the sway bar from contacting the strut assembly. That is not the case with all Dobinsons front struts including twin tube, IMS, and MRR or MRA strut assemblies. This is simply to reposition the sway bar back to a better working angle. A high angle sway bar can actually hold up the front suspension and restrict the movement of one side or the other due to the higher working angle. This Tacoma Drop Bracket Kit helps alleviate that issue.
To see all Tacoma parts that Exitoffroad.com has to offer, follow this link here:Â https://exitoffroad.com/product-category/toyota/tacoma/
3 reviews for Dobinsons Sway Bar Relocation Kit | Tacoma FJ Cruiser GX470 4Runner
You must be logged in to post a review.
Related products
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
Rated 5.00 out of 5(12 reviews) -
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
Rated 5.00 out of 5(7 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
Rated 5.00 out of 5(9 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
Rated 5.00 out of 5(13 reviews)
Eric (verified owner) –
I received it really fast.
Nathan (verified owner) –
*****
Brandon (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.