Your cart is currently empty!
Dobinsons TB43-203 Torsion Bar Pair for Mitsubishi
- Suits Mitsubishi Montero Sport 2000-2007 (also called Mitsubishi Nativa and Mitsubishi Challenger overseas) and
Mitsubishi Montero/Pajero 1995-2000 NF and NL models (also called Mitsubishi Montero and Mitsubishi Shogun) - See photos of the 2 vehicle models these are made for
- TB43-203 measure 1307mm in total length – check before ordering if you aren’t sure
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Photo for illustration purposes
$440.00
In StockDescription
Dobinsons TB43-203 Torsion bar set measures 1307mm in total length is suitable for the following vehicles:
- Mitsubishi Montero Sport 2000-2007 (also called Mitsubishi Nativa and Mitsubishi Challenger overseas)
- Mitsubishi Pajero 1995-2000 NF and NL models (also called Mitsubishi Montero and Mitsubishi Shogun)
Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.
Dobinsons TB43-203 torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons TB43-203 torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
A thick durable powdercoat provides protection against corrosion.
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL
When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
INCREASED SPRING RATEÂ
Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Simple Fitment
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
Directionally Preset & Scragged
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Durable Powdercoat Finish
A thick durable powdercoat provides protection against corrosion.
Cold Rolled Splines
Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
Vehicle Suitability:
1995 Mitsubishi Pajero Shogun Montero
1996 Mitsubishi Pajero Shogun Montero
1997 Mitsubishi Pajero Shogun Montero
1998 Mitsubishi Pajero Shogun Montero
1999 Mitsubishi Pajero Shogun Montero
2000 Mitsubishi Pajero Shogun Montero
2000 Mitsubishi Montero Sport Nativa Challenger
2001 Mitsubishi Montero Sport Nativa Challenger
2002 Mitsubishi Montero Sport Nativa Challenger
2003 Mitsubishi Montero Sport Nativa Challenger
2004 Mitsubishi Montero Sport Nativa Challenger
2005 Mitsubishi Montero Sport Nativa Challenger
2006 Mitsubishi Montero Sport Nativa Challenger
2007 Mitsubishi Montero Sport Nativa Challenger
4 reviews for Dobinsons TB43-203 Torsion Bar Pair for Mitsubishi
You must be logged in to post a review.
Related products
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Replacement Ball Joints can be ordered here
(8 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
(9 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page
Shawn (verified owner) –
Very good customer service, super friendly.
Nathan (verified owner) –
Just what I needed.
Christopher (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Adam (verified owner) –
Value for money, super satisfied.