Front KDSS Spacer – Lexus GX460 5th Gen 4Runner 2010-2024

Description

Front KDSS Spacer for the front only – Lexus GX460 5th Gen 4Runner by Treaty Oak Offroad, for a great solution to an annoying problem on lifted Lexus and Toyota SUV’s.

• KDSS Spacer Kit Made from 6061 aluminum, Type III hard coat anodized in black, and supplied with new hardware
• KDSS Spacer Kit Helps correct incessant lean of a lifted vehicle with KDSS by adding a spacer to both mounts on the rear
• KDSS Spacer Kit is a Bolt-on installation
• May require modification of a factory skid plate to clear the sway bar link at full droop
• Mounts between factory points that hold the sway bar in place
• Raised/longer spacers helps correct the lean of a vehicle and also adds additional rear travel in the back to help clear the sway bar link from the panhard rod at full extension
• Installation Instructions

If you’re lifted, and have wheeled, you have undoubtedly encountered some kdss lean. In the 4 years of working with my 2005 GX470 sport with kdss, I have run into this issue multiple times, and developed this kit to run extended travel rear shocks and help combat kdss lean.  The same applies to the Lexus GX460 and Toyota 4Runner 5th Gen

WHY DOES THIS HAPPEN?!

▪️KDSS is a complete system front and rear, that works in tandem. The driver side has an articulating cylinder and the passenger side has a rigid link, connected to the LCA (or axle in rear) via a large sway bar. They work together via hydraulic lines and accumulators that open and close to allow fluid to flow, or not flow, depending on speed. On a stock vehicle this allows for extended wheel travel vs a standard sway bar setup AND sports car type handling at speed.

▪️When your vehicle is lifted, the cylinder extends as the vehicle is raised, but the passenger side can’t due to that rigid link. This is what causes your lean.

What we developed, will equalize the pressure in the system via a set of spacers (1 in front, 2 in rear) that are utilized within the KDSS system itself and return the angle of the sway bar back to OEM angles after a lift has been installed. In turn, this will dramatically reduce or eliminate your lean.

These are 6061 aluminum, type III hard coat anodized in black, and supplied with new hardware..

*This may require modification to your factory skid plates

*While we have had fantastic results reducing and eliminating lean, due to the nature of the KDSS system it is still possible to experience some lean. A proper KDSS balance and the use of our spacers are the best option for maximizing wheel travel, while minimizing lean.

Vehicle Fitment:
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner

2010 Lexus GX460
2011 Lexus GX460
2012 Lexus GX460
2013 Lexus GX460
2014 Lexus GX460
2015 Lexus GX460
2016 Lexus GX460
2017 Lexus GX460
2018 Lexus GX460
2019 Lexus GX460
2020 Lexus GX460
2021 Lexus GX460
2022 Lexus GX460
2023 Lexus GX460