MAXTRAX MKII Mounting Pins (17mm bolts)

  • Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
  • 17mm bolt length, see attached photo for description
  • 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
  • Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
  • M10 stainless bolt has a provision for a small padlock
  • Please Note: Antiseize recommended on install
  • SOLD AS A SET OF FOUR

$65.99

In Stock
EAN: 9342256002195 SKU: MTXMPSX17 Categories: , , Brand:

Description

MAXTRAX MKII Mounting Pins for Recovery Boards

MAXTRAX Mounting Pins are the easiest, safest, and most-secure way to mount your genuine MAXTRAX Recovery Boards. Because of the unique design of our patented Keyhole, our Mounting Pins (made in both 40mm and 17mm length bolts) can carry either one or two sets of MAXTRAX (two or four boards) and their M10 stainless bolt has a provision for a small padlock, like the MAXTRAX MAXLOX. Two individual rotating Nylon “keys” allow you to securely restrain your MAXTRAX while the primary component remains stationary, attached to your roof or bed rack, or custom mounting application.

Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).

40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.

 Please Note: Antiseize recommended on install.

The Maxtrax Story

Brad McCarthy, author of Dirty Weekends “The Essential 4WD Guides”, devised the idea for MAXTRAX in 2001 after a particularly stressful incident on a remote north Queensland beach where he almost lost his bogged vehicle to the incoming tide, despite being equipped with all of the traditional recovery equipment. Brad’s passion for the Australian bush, exploration and adventure sent him out, often solo throughout Queensland, to research bush tracks and locations to feature in his guide books.

SAFE, SIMPLE, NO ASSISTANCE NEEDED

From his experiences, Brad recognized the need for a system that makes vehicle recovery and extraction a safe, simple, one-person task and eliminates the need for any outside assistance such as towing, snatching, or winching. MAXTRAX came from Brad’s idea to develop a foolproof and fail-safe quality Australian made product to make extracting or recovering a stranded or bogged vehicle a safe, simple, quick and easy procedure. Due to Brad’s experience, ingenuity and “hands-on” research, the idea of an alternative and innovative vehicle recovery device that was safe, simple, quick and easy to use eventually came to fruition in the form of MAXTRAX.

LIGHTWEIGHT & DURABLE

We tested several types and grades of super tough nylons to create a lightweight, yet durable product that provides superior performance with our focus on the key issues of strength, effectiveness, usability and aesthetics. MAXTRAX was trialled countless times using typical (and not so typical) bogging scenarios and after many late nights and product refinements, MAXTRAX was ready to launch onto the Australian 4WD accessories market in late 2005. Not long after, MAXTRAX won Australian 4WD Monthly Magazine’s award for Best New Product under $500.

Maxtrax MKII Recovery Boards makes vehicle recovery and extraction a safe, simple, one-person task and eliminates the need for any outside assistance

NOW WIDELY AVAILABLE

Since then MAXTRAX MKII have been discovered by 4WD adventurers around the world as the safe, simple, quick and easy method of vehicle recovery. MAXTRAX MKII are now widely available around Australia at most TJM, Opposite Lock, ARB, BCF, Supercheap Auto and Anaconda stores as well as a number of independent retailers, and from stockists in thirty countries including the USA, Peru, South Africa, Norway, France, England, Japan, Ukraine, New Zealand and UAE, to name just a few. Our customers now include mining, energy and exploration companies, government agencies, 4WD trainers and tour operators, lifeguard services, rural fire services, State Emergency Service branches, off road rally drivers, the Australian Army, US Defense Force and the United Nations.

In November 2010, the new MAXTRAX MKII won 2 Global Media Awards for Best New Product at the 2010 SEMA Show in Las Vegas, NV, USA. Not a bad result for a 5-year-old ‘little Aussie company’ on its first visit to SEMA!

MAXTRAX is now an I4WDTA (International 4WD Trainers Association) Recommended Product.

Maxtrax MKII Recovery Boards makes vehicle recovery and extraction a safe, simple, one-person task and eliminates the need for any outside assistance

WARRANTY

MAXTRAX Products purchased after January 1, 2017 from an authorized dealer in the United States come with a Lifetime Manufacturer’s Warranty against defects and faulty materials.

This Warranty is provided by MAXTRAX Australia and facilitated in the United States by Adventure Imports, LLC who holds no responsibility for the warranty.

This warranty is subject to the Limitations on Refunds/Replacements at Clause 3 below, if the Product/s, when used in accordance with the “Instructions for Use” provided with the Product/s, fails due to defective manufacture, we will replace the faulty product.

If the Product/s is found, upon inspection by us, to be defective and covered by our warranty, we will arrange for a replacement or refund (as applicable), normally within 7 working days of receipt of the Product/s (this may take longer in some cases if product is out of stock). MAXTRAX expressly excludes any liability for consequential loss, incidental or indirect damages (including but not limited to damages for loss of profits and business interruption) due to a defect of the Product/s. In particular any loss or damage caused to any equipment or accessories used with the Product/s or any loss resulting from a delay in repair or replacement are excluded to the extent permitted by law.

At our discretion, we may void the warranty if we deem the product has been used outside of its intended purpose for light-truck vehicles weighing under 7750LBS or 3500KGs. If the product has signs of excessive wheel spin that could have structurally damaged the product, we reserve the right to void the warranty. If the product has been modified in any way, shape, or form from the original manufacturer’s design, including drilling holes for mounting, or shortening the product, this warranty is void. Please see Clause 3 below for further details.

Under no circumstances does this warranty cover any damage caused by misuse due to wheel spin causing melted or broken “lugs” or “teeth”.

2. Procedure for Warranty Claims
Please contact us by email at warranty@adventure-imports.com and tell us the reason for your Warranty Claim and, if possible, provide images of the Product/s in question. Provide us with the date of purchase and your “Proof of purchase”.

All warranty claims require a proof of purchase. At our discretion, we may require the product to be returned to MAXTRAX at the purchaser’s cost for failure analysis. MAXTRAX will cover the cost of return shipment of warrantied items.

3. Limitations on Refunds/Replacements
We cannot accept the return of any Product that has been used, unless it is defective and returned in accordance with the procedure outlined above.
If a Product is returned in the following condition/s, this warranty will not apply.

• Does not match the Product you purchased
• Is found, upon inspection by us or on our behalf, to be not defective as claimed, or failure was due to non-compliance with the Product’s “Instructions for Use” (including but not limited to, for example, burning, melting or breaking of the Product/s caused by spinning tire/s; or damage caused by using the Product/s on hard or rocky surfaces)
• Damage to the Product/s is found, upon inspection by us or on our behalf, to be caused by wear and tear, abuse, misuse, accidental impact/s with a harder object (such as metal automotive component)
• The Product/s though damaged, is/are still intact, serviceable and capable of performing its/their intended function, and is/are not defective
• Is missing components
• Has been modified or altered in any way
• Has been used (unless returned as defective)
• You received what you asked for but simply changed your mind, found it cheaper elsewhere, decided you did not like the purchase or had no use for it
• Proof of purchase has not been provided
• You knew of or were made aware of the defects before you bought the Product/s
• Product has been modified outside of how it was originally designed from the manufacturer
• You are not the original owner of the Product/s