Your cart is currently empty!
RCI Tacoma Rock Sliders | 2005-2015 Toyota Tacoma
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Fits 2005-2015 4wd access cab and double cab trucks
- Made to order from your selections below
- Made in USA
$929.99
In StockDescription
Tacoma Rock Sliders DETAILS
The rocker panel is the most vulnerable area on your vehicle when off-road, as well as one of the most costly to repair. Protect your truck with a pair of RCI heavy duty rock sliders.
RCI Tacoma Rock Sliders utilize a full frame support mounting plate which serves both to protect your frame from damage, as well as provides an extremely rigid attachment for the sliders by using multiple bolt locations all across the frame. These will help protect the truck both off-road as well as in the parking lot, and are still very functional as a step if needed.
Tacoma Rock Sliders KEY FEATURES
- Tacoma Rock Sliders Protect rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round HREW tube used by competitors
- Sliders now come STANDARD with 1.75″ DOM outer rails for uncompromised strength
- Heaavy duty 1/4″ thick gussets on all four legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for step surface provides many benefits
- Added safety for kids and pets getting in and out of the vehicle
- Added protection to rocker panels from rocks and debris thrown from tires
- Dimpled surface gives added grip and provides structural rigidity to the slider
- We recommend 5 Degree for this option, for flatter step surface
- Easy install with only basic hand tools
- Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
- All hardware and installation instructions provided (grade 8 hardware where applicable)
- Standard with RCI’s signature low profile rear kick-out
- Fits 2005-2015 4wd access cab and double cab trucks
NEW – Optional 5 Degree low angle option for maximizing functionality as a side step, but still retains all the benefits of a true rock slider.
MADE IN LOVELAND, COLORADO
*Please note – Long-bed rock sliders will ship Fedex Freight. By default they will NOT include lift gate service.
Vehicle Fitment:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
4 reviews for RCI Tacoma Rock Sliders | 2005-2015 Toyota Tacoma
You must be logged in to post a review.
Related products
-
Tacoma 3rd Gen (2016-2023)Dobinsons Tacoma L59-112-R Heavy Duty Leaf Springs Pair for 2005-2023 (800-1200LBS)
- Suits Toyota Tacoma 2005-2023, lifts 2-2.25″ with at least 800LBS of constant load on the rear end
- Sold in pairs
- Each pack has 7 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
(10 reviews) -
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Toyota Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons Tacoma L59-111-R Leaf Springs Pair for 2005 to 2023 (500-800LBS)
- Lifts Dual Cab Short Beds (DCSB) 2.25″ with 500-800LBS of added weight (more weight=less lift)
- Lifts Access Cab Long Beds (ACLB) 2-2.25″ with 0-200LBS of added weight
- Sold in pairs
- Each pack has 6 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- 3rd leaf down from the top can be removed to reduce spring rate, making springs medium load
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
(5 reviews)
Nathan (verified owner) –
Value for money, super satisfied.
Jacob (verified owner) –
Very good customer service, super friendly.
David (verified owner) –
Very fast delivery.
Thomas (verified owner) –
Value for money, super satisfied.