Your cart is currently empty!
Sale!
RCI Rock Sliders | 2016-2023 Tacoma
- Fits 2016-2023 Tacoma 4wd access cab and double cab trucks
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Made to order from your selections below
- Made in USA
Original price was: $874.99.$787.49Current price is: $787.49.
In StockDescription
TACOMA SLIDERS DETAILS
The rocker panel is the most vulnerable area on your vehicle when off-road, as well as one of the most costly to repair. Protect your truck with a pair of RCI heavy duty rock sliders.
RCI Tacoma sliders utilize a full frame support mounting plate which serves both to protect your frame from damage, as well as provides an extremely rigid attachment for the sliders by using multiple bolt locations all across the frame. These will help protect the truck both off-road as well as in the parking lot, and are still very functional as a step if needed.
KEY FEATURES
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round HREW tube used by competitors
- Sliders now come STANDARD with 1.75″ DOM outer rails for uncompromised strength
- Heaavy duty 1/4″ thick gussets on all four legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for step surface provides many benefits
- Added safety for kids and pets getting in and out of the vehicle
- Added protection to rocker panels from rocks and debris thrown from tires
- Dimpled surface gives added grip and provides structural rigidity to the slider
- We recommend 5 Degree for this option, for flatter step surface
- Easy install with only basic hand tools
- Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
- All hardware and installation instructions provided (grade 8 hardware where applicable)
- Standard with RCI’s signature low profile rear kick-out
- Fits 2016-2019 4wd access cab and double cab trucks
NEW – Optional 5 Degree low angle option for maximizing functionality as a side step, but still retains all the benefits of a true rock slider.
MADE IN LOVELAND, COLORADO
*Please note – Long-bed rock sliders will ship Fedex Freight. By default they will NOT include lift gate service.
Vehicle Fitment:
2016 Toyota Tacoma
2017 Toyota Tacoma
2018 Toyota Tacoma
2019 Toyota Tacoma
2020 Toyota Tacoma
2021 Toyota Tacoma
2022 Toyota Tacoma
2023 Toyota Tacoma
8 reviews for RCI Rock Sliders | 2016-2023 Tacoma
You must be logged in to post a review.
Related products
-
SuspensionPrice Increase Coming May 1stDobinsons C59-302 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- See Vehicle Fitment list down below
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 395mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- THE best selling coils that Dobinsons sell for any vehicle in the USA
- This is a comparable option to OME 2885 coils, which are 395mm free height, 16mm wire, 590LBF/in spring rate. Many Old Man Emu coils and struts are being discontinued.
(22 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
SuspensionPrice Increase Coming May 1st
Dobinsons C59-352 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- See Vehicle Fitment List down below
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 18mm wire diameter, 730LB/IN Spring Rate
(20 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
DobinsonsPrice Increase Coming May 1st
Dobinsons Greasable Bolt Pair | SP59-060
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
- 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end
(12 reviews) -
ExcludedPrice Increase Coming May 1st
Dobinsons Pickup Rear Drawers Kit with Fridge Slide 39x51x10″
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
- Optional Universal Side Wing Panel kit
- Optional Drawer Dividers
(12 reviews)
Christopher (verified owner) –
Would definitely buy from this site again.
Nicholas (verified owner) –
Would definitely buy from this site again.
Charles (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
James (verified owner) –
Very good customer service, super friendly.
Paul (verified owner) –
It’s exactly what I wanted.
Gregory (verified owner) –
Would definitely buy from this site again.
Mark (verified owner) –
Just what I needed.
Mark (verified owner) –
5 Stars!!