Your cart is currently empty!
RCI Rock Sliders | 03-09 4Runner + Lexus GX470
- Fits 2003-2009 4runners without Xreas, unless you’ve removed those lines. Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- *Does not fit KDSS models of GX470, unless you remove KDSS system from frame
- Made to order from your selections below
- Made in USA
$779.99 Original price was: $779.99.$624.99Current price is: $624.99.
Description
GX470 SLIDERS DETAILS
The rocker panel is the most vulnerable area on your vehicle when off-road, as well as one of the most costly to repair. Protect your investment with a pair of RCI heavy duty rock sliders.
RCI GX470 sliders and 4th Gen 4Runner sliders utilize a full frame support mounting plate which serves both to protect your frame from damage, as well as provides an extremely rigid attachment for the sliders by using multiple bolt locations all across the frame. These will help protect the truck both off-road as well as in the parking lot, and are still very functional as a step if needed.
KEY FEATURES
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer tubing is now standard for uncompromised strength
- Heavy Duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for for use as a step
- Easy install with only basic hand tools
- Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
- All hardware and installation instructions provided
- Fits 2003-2009 4runners without Xreas (Xreas model available by special request, call for details)
- Includes our signature low profile rear kick-out standard
- *Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
- *Does not fit KDSS models of GX470
Vehicle Fitment:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470
5 reviews for RCI Rock Sliders | 03-09 4Runner + Lexus GX470
You must be logged in to post a review.
Related products
-
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
Rated 5.00 out of 5(10 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-300 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- This is a comparable option to OME 2884 coils, which are 390mm free height, 16mm wire, 590LBF/in spring rate
Rated 5.00 out of 5(15 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
Rated 5.00 out of 5(15 reviews) -
Suspension
Dobinsons C59-302 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- See Vehicle Fitment list down below
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 395mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- THE best selling coils that Dobinsons sell for any vehicle in the USA
- This is a comparable option to OME 2885 coils, which are 395mm free height, 16mm wire, 590LBF/in spring rate. Many Old Man Emu coils and struts are being discontinued.
Rated 5.00 out of 5(22 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page
Charles (verified owner) –
5 Stars!!
Aaron (verified owner) –
Very good customer service, super friendly.
Brian (verified owner) –
5 Stars!!
Gregory (verified owner) –
Very fast delivery.
Michael (verified owner) –
Value for money, super satisfied.