You may be interested in…

• 

  • 
  • 
  • 

  Exceptions

  THIS SHIPS FREE
  within 48 US States

  Dobinsons Rear Adjustable Hydro Bump Stop Kit | LC 200 250 300 Sequoia GX550 4Runner

  • Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
  • Suits the rear of the following vehicles:
    • Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021
    • 2022+ Land Cruiser 300 Series
    • 2024+ Land Cruiser 250 Series, Lexus GX550
    • 2023+ Toyota Sequoia
    • 2025+ Toyota 4Runner
  • This hydraulic bump stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection
  • The Dobinsons Rear Adjustable Hydro Bumps Stop kit also retains the original external bump stop on the frame, and the kit comes with spacer blocks to lower the original bump stop down to meet the same bottom-out level as the new hydraulic bumps
  • You can replace the original frame-mounted bump stop with an aftermarket one if you’d like
  • This hydro bumps stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection, in addition to setting the bump stop gap for long travel shocks, increased tire clearance, or whatever else you may need to restrict or free up the amount of bump stop gap that your vehicle has
  • The adjustable hydro bumps can easily spin on their threaded body to raise up or down in the mounts provided so that you can tune in the height quite easily
  • You’ll possibly have to take the coil out of the way to get in there and accurately set and adjust the height
  • CNC Machined 50mm Billet Aluminum Piston
  • EDP Coated 3mm Thick 56mm Steel Body
  • Threaded Body For Height Adjustment to adjust when the stop will engage
  • Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
  • 30mm Micro Polished Hard Chrome Shaft
  • Slow Rebound Valving To Prevent Bucking
  • Removable Dust Cover Boot For Stealth Appearance
  • Fully Rebuildable & Tunable
  • O-Ring Travel Indicator
  • Heavy Duty Extreme-Race style Triple Seal Design
  • Nitrogen Gas Charged & Tunable (100 to 300 PSI)
  • Pre-charged to 110 PSI
  • Extra Short Dead Lengths For Compact Fitment
  • Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
  • Kit Includes:
    • HBS59-013FK Mounting Kit
    • HBS56-009 Hydraulic Bump Stops
  • 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
  • Installation Instructions

  Rated 5.00 out of 5

  (7 reviews)

  $900.00 Add to cart
• 

  • 
  • 
  • 

  Camping Equipment

  Dobinsons 4×4 Full Extension Fridge Slide to suit 60 and 80L Fridges

  • Suits most 60/80L fridges and coolers on the market today. Measure before ordering.
  • Strong folded steel construction, rattle free, smooth sliding. Can lock at 2/3 open or completely open.
  • Powder coated black for a long-lasting finish, has in and out locking pin with 3 positions (closed, 2/3 open, and fully open)
  • Includes 4 x Fridge straps, or you can bolt the feet of the fridge to the slide itself, eliminating the straps
  • 150KG weight rating, 479 x 680mm internal dimensions, 425 x 705 x 90mm external dimensions

  Rated 5.00 out of 5

  (5 reviews)

  $520.00 Add to cart
• 

  • 
  • 
  • 

  Skid Plates + Rock Sliders - LC250

  THIS SHIPS FREE
  within 48 US States

  Asfir 4×4 Land Cruiser 250 Aluminum Skid Plate Kit (4 Pcs) 2024+

  • Suits 2024-2025+ Toyota Land Cruiser 250 with the 2.4L hybrid gasoline engine (USA Spec)
  • Precision-built for the 2.4L Hybrid Land Cruiser 250 (FHEV)
  • Not compatible with a diff drop kit installed
  • The Land Cruiser Underbody Protection Kit (4 Pcs) contains A Front skid plate, a Transmission/Gearbox skid plate, a Transfer Case skid plate and a Fuel Tank skid plate.
  • Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
  • ‌Cleverly engineered to provide optimal protection to the ‌vulnerable under-vehicle components.
  • ‌‌Designed specifically to complement the Land Cruiser’s structure, and minimize clearance loss.
  • ‌Built with stiffening and reinforcing ribs to provide even greater strength where needed.
  • ‌‌Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
  • ‌Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
  • ‌No cutting or drilling is required. Completely bolt-on.
  • ‌The package includes all needed hardware.
  • ‌Weighs in at 87 LBS
  • ‌‌‌Proudly made in Israel.
  • Lead times may vary since this is a new product on the market

  (0 reviews)

  $1,455.00 Add to cart
• 

  • 
  • 

  Bump Stops + Spacers

  THIS SHIPS FREE
  within 48 US States

  Dobinsons Hydro 2.2″ Bump Stops – 1.8″ Stroke, 7.4″ Extended (Pair) – HBS56-009

  • HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
  • CNC Machined 50mm Billet Aluminum Piston
  • EDP Coated 3mm Thick 56mm Steel Body
  • Threaded Body For Height Adjustment
  • Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
  • 30mm Micro Polished Hard Chrome Shaft
  • Slow Rebound Valving To Prevent Bucking
  • Removable Dust Cover Boot For Stealth Appearance
  • Fully Rebuildable & Tunable
  • O-Ring Travel Indicator
  • Heavy Duty Extreme-Race style Triple Seal Design
  • Nitrogen Gas Charged & Tunable (100 to 300 PSI)
  • Pre-charged to 150 PSI
  • Extra Short Dead Lengths For Compact Fitment
  • No mounting cans or mounting fit kit is included (sold separately)
  • Photo attached shows these bump stops installed with the weld-on mounts

  (0 reviews)

  $650.00 Add to cart