FREE SHIPPING
within 48 US States

Rusty’s Adjustable Front Lower Control Arms w/Forged Flex Ends – High Clearance | JL Wrangler Gladiator JT

(14 customer reviews)
  • Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
  • Comes with highly flexible rubber bushings installed on the axle end, and high flex joints on the frame end
  • Massive 2 inch DOM Tubing
  • Greasable flex joints on the frame end
  • Adjustable to fine-tune caster, pinion angle, and wheelbase
  • High Clearance feature
  • Black powder coated
  • Sold as a pair, left and right
  • Included studs to hold the brake lines
  • Made in the USA

$286.00

In Stock

Description

Rusty’s Jeep JL JT Adjustable Front Lower Arms are Adjustable Control Arms and are fabricated from thick 2″ DOM tubing and are shaped to maximize flex as well as tire and wheel clearance. 1.25″ x 12 threads are used in the arms and on our forged ends for strength and easy adjustability. Our Forged Flex Ends offer greater suspension flex, adjustable preload settings, and are greaseable for long life. The Forged Ends are secured with the supplied jam nuts and are tested to withstand over 100,000 psi! These arms also include Factory OEM-quality bushings installed at the axle end, and the arms themselves come powder coated in a glossy black finish.

  • Comes with highly flexible rubber bushings installed on the axle end, and high flex joints on the frame end
  • Massive 2 inch DOM Tubing
  • Greasable flex joints on the frame end
  • Adjustable to fine-tune caster, pinion angle, and wheelbase
  • High Clearance feature
  • Black powder coated
  • Sold as a pair, left and right
  • Included studs to hold the brake lines
  • Made in the USA

Replacement Components:
Forged Flex End Replacement: 10004-1625-RH
Forged Flex End Race Kit: M20572
Rubber Bushing Replacement: RC-BH858

NOTE: The Rusty’s JL JT Adjustable Front Lower Arms threaded end goes towards the frame end, and the curved section of the arm faces towards the frame, to maximize tire clearance when turning.  This angled position provides additional tire scrub radius clearance, which is extremely important on 35″ or 37″ tires, as they will hit the stock arms too easily, damaging your tires and potentially damaging other parts as well.
Instructions for use: Set the initial length of the Rusty’s Adjustable Front Lower Arms to the same as factory arms, then add 1/2″ or so to the overall length.  Install, then check the caster angle, then add at 1/4″ increments until your caster angle is set properly.  Adding too much length could lead to driveline vibrations.  It’s recommended to use blue Loctite under each of the nuts once they are in their final adjusted position to keep them in place.  Excessive flexing without the front sway bar connected can loosen them up otherwise.
Rusty’s heavy duty front control arms are the some of the most affordable on the market, while adding necessary strength to the front end.  The last thing you want when you offroad a lot is a bent arm, as this affects your alignment and your vehicle will not track straight down the road.  With 5mm thick wall tubing, you can’t go wrong with a set of these.

The Rusty’s Forged Flex Ends were designed and manufactured with quality, reliability, and strength as our first priority.

The Forged Flex Ends feature 1.25″ x 12 threads, locking jam nut, Delrin bearing races, and a chromed spherical bearing. These outer casing of the forged ends offers over 100,000 psi of strength. No wimpy snap rings here, Rusty’s was the first to design and manufacture an end without snap rings; we use only threaded adjustable retainers that are CNC machined for a perfect fit. The adjustable spanner nut allows you to dial in the perfect amount of pre-load. To adjust the pre-load, simply tighten the spanner nut to the desired pressure, line up the groove in the preload nut with the set screw, and then tighten the set screw.

The Delrin races provide high strength and a superior fit while being much more durable than other poly style races. The plated Chrome Moly (short for Chromium Molybdenum) spherical bearing offers long life, high strength, and adds to the end assembly’s great flex. All rod ends come with grease fittings. Be sure to grease the joints regularly for a lifetime of quiet, reliable service.

Since all moving parts wear, Rusty’s offers inexpensive rebuild kits for all the moving parts of the joint.

Vehicle Fitment:
2018 Jeep Wrangler
2019 Jeep Wrangler
2020 Jeep Wrangler
2021 Jeep Wrangler
2022 Jeep Wrangler
2023 Jeep Wrangler
2024 Jeep Wrangler
2020 Jeep Gladiator
2021 Jeep Gladiator
2022 Jeep Gladiator
2023 Jeep Gladiator
2024 Jeep Gladiator

About Rusty’s Off-Road

Rusty’s Off-Road is a leader in the 4X4 industry with our innovative line of Jeep specific products. Our in-house manufacturing and R & D keeps our products on the cutting edge. With our in house manufacturing we are able to control cost and sell retail at wholesale cost without sacrificing quality.

We have over 45 years of hands on experience in the off-road vehicle industry giving us the knowledge that few of our competitors have. Rusty’s has grown from a small business serving a regional market to a worldwide company. We have grown from a small 2 bay shop to an ever growing 65,000 square foot building. Yes, we too started off with torches and big hammers but today it’s high-tech measuring devises, precision machining centers, lasers, robots and a group of very dedicated employees to produce what we think are the very best in off road products.

We proudly back our products as ‘Trail Tested Tough.’ Each of our parts go through extensive prototype testing on the trails, allowing us to improve and strengthen our designs so we release only the highest quality products. Moab, Rubicon, Tellico, Wind Rock, and Jeep Jamboree events around the country have been regular stomping grounds for the Rusty’s Off Road Testing Crew over the years. Many parts have been run and tested in some of the most grueling off road races and rallies and with this abuse and testing you can be assured you will be getting the very best part built.

AROUND RUSTY’S OFF-ROAD

Growing from that 2 bay shop to this over 65,000 you think there is no way we will run out of room, well just as soon as we finished our latest construction, we quickly found out how quickly they will fill up. We have worked hard to keep things organized and invested hours in setting up the shipping dept to get parts shipped as fast as we can. 

SOME OF OUR SHOP EQUIPMENT

We’re proud to say that we use state-of-the-art equipment to manufacture all of our products right here in the USA. We are constantly investing in new and upgraded equipment that allows us to build better products more efficiently and with a greater degree of accuracy than ever before. Rusty’s has invested in multiple new laser machines, multiple CNC machines, a pair of CNC press breaks, welding robots and much more in order to keep pace with our sales growth and new products production. In-house manufacturing allows us to maintain a level of quality control that could never be matched when outsourcing production. Keep checking back for details on our new machines and the new products we’ll be offering!

14 reviews for Rusty’s Adjustable Front Lower Control Arms w/Forged Flex Ends – High Clearance | JL Wrangler Gladiator JT

  1. Steven (verified owner)

    Would definitely buy from this site again.

  2. Mark (verified owner)

    Great description on the page, easy to understand what I was buying.

  3. Benjamin (verified owner)

    Very good customer service, super friendly.

  4. Jose (verified owner)

    Good quality, really nice.

  5. Michael (verified owner)

    Would definitely buy from this site again.

  6. Jose (verified owner)

    Very good customer service, super friendly.

  7. Eric (verified owner)

    Would definitely buy from this site again.

  8. Gregory (verified owner)

    Good quality, really nice.

  9. Patrick (verified owner)

    Great description on the page, easy to understand what I was buying.

  10. Steven (verified owner)

    Very fast delivery.

  11. John (verified owner)

    This is my go-to now for off road parts.

  12. Patrick (verified owner)

    Just what I needed.

  13. Matthew (verified owner)

    I received it really fast.

  14. Nathan (verified owner)

    Value for money, super satisfied.

Add a review

You may also like…

  • Rustys Front Lower Control Arms with Forged Rubber Ends High Clearance Jeep JL Wrangler Gladiator JT
    Suspension
    FREE SHIPPING
    within 48 US States

    Rusty’s Adjustable Front Lower Control Arms w/Forged Rubber Ends – High Clearance | JL Wrangler Gladiator JT

    • Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
    • Comes with highly flexible rubber bushings installed
    • Rubber bushings on both ends give the best possible ride quality
    • Adjustable to fine-tune caster, pinion angle, and wheelbase
    • Massive 2 inch DOM Tubing
    • Maintenance Free Rubber Bushings
    • High Clearance feature
    • Black powder coated
    • Sold as a pair, left and right
    • Included studs to hold the brake lines
    • Made in the USA
    (12 reviews)
    $286.00 Add to cart