Rusty's HD Aluminum Drag Link Assembly for JK Wrangler
FREE SHIPPING
within 48 US States

Rusty’s HD Aluminum Drag Link Assembly | JK Wrangler

(5 customer reviews)
  • Fits: 2007-2018 Jeep Wrangler JK Models
  • A drag link connects from the Pitman Arm of the Steering Box down to the knuckle on the wheel
  • Massive 1.825″ 7075 Aluminum Drag Link
  • Adjustable forged ends are threaded for adjustment without removing the drag link from the vehicle
  • Machined hexed ends for easy adjustment
  • Zinc plated tie rod ends for protection and long life
  • Polished to a “like Chrome finish”
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JK Drag Link you can buy
  • Built in Rainbow City, Alabama, USA
  • Also available in a steel DOM version

$459.00

In Stock
Share (0)
Total: 0 Total: 0
SKU: RS-DL810-JK-ALUMINUM Categories: , , , Brand:

Description

The Rusty’s Aluminum Heavy-Duty Drag Link for 2007-2018 Jeep Wrangler JK is beefier than anything on the market and is packed with unique features! Rusty’s Aluminum HD Drag Link starts with a massive machined 1.825″ diameter solid 7075 T6 aluminum, which is much larger and stronger than the factory drag link. Equally massive forged adjustable ends thread into the drag link with jam nuts.

Rusty’s Aluminum HD Drag Link for the JK Wrangler works great as a stand-alone upgrade or can be combined with our HD Tie Rod to create a steering system that is nearly indestructible! Sold as a complete unit that includes the drag link bar, tie rod ends, and jam nuts.

KEY FEATURES:

  • Massive 1.825″ 7075 Aluminum Drag Link
  • Adjustable forged ends are threaded for adjustment without removing the drag link from the vehicle
  • Machined hexed ends for easy adjustment
  • Zinc plated tie rod ends for protection and long life
  • Polished to a “like Chrome finish”
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JK Drag Link you can buy

 

DRAG LINK TIE ROD END PART NUMBERS:
RS-TR016-JK / (Right Hand Thread) (Located on the Passenger Side @ Steering Knuckle)
RS-TR015-JK / (Left Hand Thread) ( Located on the Driver Side @ Pitman Arm)

Vehicle Suitability:

2007 Jeep Wrangler JK Drag Link Assembly
2008 Jeep Wrangler JK Drag Link Assembly
2009 Jeep Wrangler JK Drag Link Assembly
2010 Jeep Wrangler JK Drag Link Assembly
2011 Jeep Wrangler JK Drag Link Assembly
2012 Jeep Wrangler JK Drag Link Assembly
2013 Jeep Wrangler JK Drag Link Assembly
2014 Jeep Wrangler JK Drag Link Assembly
2015 Jeep Wrangler JK Drag Link Assembly
2016 Jeep Wrangler JK Drag Link Assembly
2017 Jeep Wrangler JK Drag Link Assembly
2018 Jeep Wrangler JK Drag Link Assembly

 

5 reviews for Rusty’s HD Aluminum Drag Link Assembly | JK Wrangler

  1. Sean (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  2. Mark (verified owner) –

    Good quality, really nice.

  3. Jesse (verified owner) –

    I received it really fast.

  4. Anthony (verified owner) –

    *****

  5. Michael (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

Add a review

You may also like…

  • Rusty's HD Steering System JK Wrangler
    • Rusty's HD Steering System JK Wrangler
    • Rusty's Aluminum HD Steering System JK Wrangler
    • Rusty's Aluminum HD Steering System JK Wrangler
    Steering Upgrades
    FREE SHIPPING
    within 48 US States

    Rusty’s HD Steering System | JK Wrangler
    • Fits: 2007 to 2018 Jeep Wrangler JK Models
    • Over 45 Years of Building Steering and Suspension Components
    • Massive 1.75″ x 0.250-wall DOM Tubing Drag Link and Tie Rod
    • Large 1.25″ threads on the U.S.A. tie rod ends, most brands are imports
    • Machined hexed ends for easy adjustment
    • Zinc plated tie rod ends for protection and long life
    • Serrated Lock Washers
    • The strongest JK steering assembly you can buy
    • Steering stabilizer tie rod clamp bracket included
    • INSTALLATION INSTRUCTIONS
    • Built in Rainbow City, Alabama, USA
    • Also made in a Aluminum version
    (4 reviews)
    $744.00 Add to cart
  • Rusty's Aluminum HD Steering System JK Wrangler
    • Rusty's Aluminum HD Steering System JK Wrangler
    • Rusty's Aluminum HD Steering System JK Wrangler
    • Rusty's Aluminum HD Steering System JK Wrangler
    Steering Upgrades
    FREE SHIPPING
    within 48 US States

    Rusty’s Aluminum HD Steering System | JK Wrangler
    • Fits: 2007 to 2018 Jeep Wrangler JK Models
    • Over 45 Years of Building Steering and Suspension Components
    • Massive  Solid 1.825″ 7075 Aluminum Drag Link and Tie Rod precisions machined
    • Large 1.25″ threads on the U.S.A. tie rod ends, most brands are imports
    • Machined hexed ends for easy adjustment
    • Zinc plated tie rod ends for protection and long life
    • Polished to a “like Chrome finish”
    • Serrated Lock Washers
    • The strongest JK steering assembly you can buy
    • Steering stabilizer tie rod clamp bracket included
    • INSTALLATION INSTRUCTIONS
    • Built in Rainbow City, Alabama, USA
    • Also made in a DOM steel version
    (3 reviews)
    $917.00 Add to cart

Related products

  • Warn 106690 Jack Hammer Wheel - 17x8.5 5x5 0 Offset - Gun Metal (2)
    • Warn 106690 Jack Hammer Wheel - 17x8.5 5x5 0 Offset - Gun Metal (2)
    • Warn 106690 Jack Hammer Wheel - 17x8.5 5x5 0 Offset - Gun Metal (2)
    • Warn 106690 Jack Hammer Wheel - 17x8.5 5x5 0 Offset - Gun Metal (2) installed on wrangler
    Warn
    FREE SHIPPING
    within 48 US States

    Warn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
    • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
    • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
    • Sold Individually
    • Gun Metal Finish
    • 1 Piece Cast Aluminum Construction
    • Compatible With TPMS (Tire Pressure Monitoring System)
    • With Warn Logo Center Cap
    • Limited Lifetime Structural Warranty
    • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
    • Bolt Pattern Inch: 5×5.00
    • Bolt Pattern Millimeter: Not Applicable
    • Diameter: 17
    • Width: 8.5
    • Offset: 0
    • Backspacing: 4.75
    • Material: Aluminum
    • Finish: Painted
    • Color: Gun Metal
    • Bolt Pattern Inch: 5×5.00
    • Bolt Pattern Inch: Not Applicable
    • Bolt Pattern Millimeter: 5×127
    • Bolt Pattern Millimeter: Not Applicable
    • Lug Nut Seat Type: 60 Degree Conical
    • Center Cap: See Replacement Items
    • Center Bore: 71.50
    • Lug Nut Design: Acorn
    • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
    • Basic Design: Solid Center
    • With Inserts: No
    • Load Capacity: 2100
    • Size: 17×8.5
    • Max Tire Diameter: 40
    • Center Cap Design: Warn Logo
    • Structural Warranty: Lifetime
    • Quantity: Single
    • Construction: One Piece Cast
    • With Hub Centric Ring: No
    • Estimated Install Time (Hours): 0.5
    • Restriction IconProp 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
    (3 reviews)
    $299.99 Add to cart
  • Sale! Dobinsons steering dampers display image
    Dobinsons
    On Sale All November!!

    Dobinsons Big Bore Steering Damper for Jeep Cherokee Wrangler Grand Cherokee, models XJ YJ TJ ZJ WJ JK
    • Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
    • Cellular Foam Cell Insert, Teflon Piston Rings
    • Excellent Viscosity Temperature Performance
    • NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
    • Replaces OE steering damper, bolts into place. Can be used with or without a lift.
    (7 reviews)
    Original price was: $135.00.Current price is: $114.75. Add to cart
  • 4 Tire Inflation System - Jeep Wrangler JK & JKU Engine Bay Mount Driver Side Front
    • 4 Tire Inflation System - Jeep Wrangler JK & JKU Engine Bay Mount Driver Side Front
    • 4 Tire Inflation System - Jeep Wrangler JK & JKU Engine Bay Mount Driver Side Front
    • 4 Tire Inflation System - Jeep Wrangler JK & JKU Engine Bay Mount Driver Side Front
    Overland Vehicle Systems (OVS)
    FREE SHIPPING
    within 48 US States

    4 Tire Inflation System – Jeep Wrangler JK & JKU Engine Bay Mount Driver Side Front
    • For Jeep Wrangler & Unlimited JK & JKU
    • Air It Up® 4 Tire Inflation System can deflate, and automatically inflate or equalize 4 tires at the same time.
    • Includes ADS Controller Box, 90 psi Pressure Regulator, 150 psi Blow-off Valve.
    • ADS Controller features 2 inlet valves with permanent or portable air source.
    • Includes Pre-cut Hoses, Push To Connect Fittings, and everything that is needed for easy installation.
    • Includes 8 Quick Connect Chucks with the easy to use Betty Bar™ feature and 4 Green Tire Connect Whips with a Storage Bag
    • Heavy Duty Construction with DOT approved hoses and fittings.
    • Designed to work with the EGOI 2 Air Compressor, ARB and Viair Compressors
    • Complete line of Air Compressor Bracket Kits Available for Under Engine, Under Seat, & Rear Cargo Area Mounting Solutions.
    • 5-Year Limited Month Warranty
    • Download Instruction Manual
    (3 reviews)
    $299.99 Read more
  • Warn 106688 Diamond Cutter Wheel - 17x8.5 5x5 0 Offset - Gun Metal (1)
    • Warn 106688 Diamond Cutter Wheel - 17x8.5 5x5 0 Offset - Gun Metal (1)
    • Warn 106688 Diamond Cutter Wheel - 17x8.5 5x5 0 Offset - Gun Metal (3)
    • Jeep Wrangler Unlimited JL Rubicon with Dobinsons 3" suspension kit, Warn Diamond Cutter Wheels and Falken Wildpeak RT01 Tires
    Warn
    FREE SHIPPING
    within 48 US States

    Warn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
    • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
    • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
    • Sold Individually
    • Gun Metal Finish
    • 1 Piece Cast Aluminum Construction
    • Compatible With TPMS (Tire Pressure Monitoring System)
    • With Warn Logo Center Cap
    • Limited Lifetime Structural Warranty
    • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
    • Bolt Pattern Inch: 5×5.00
    • Bolt Pattern Millimeter: Not Applicable
    • Diameter: 17
    • Width: 8.5
    • Offset: 0
    • Backspacing: 4.75
    • Material: Aluminum
    • Finish: Painted
    • Color: Gun Metal
    • Bolt Pattern Inch: 5×5.00
    • Bolt Pattern Inch: Not Applicable
    • Bolt Pattern Millimeter: 5×127
    • Bolt Pattern Millimeter: Not Applicable
    • Lug Nut Seat Type: 60 Degree Conical
    • Center Cap: See Replacement Items
    • Center Bore: 71.50
    • Lug Nut Design: Acorn
    • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
    • Basic Design: 5 Spoke
    • With Inserts: No
    • Load Capacity: 2100
    • Size: 17×8.5
    • Max Tire Diameter: 40
    • Center Cap Design: Warn Logo
    • Structural Warranty: Lifetime
    • Quantity: Single
    • Construction: One Piece Cast
    • With Hub Centric Ring: No
    • Estimated Install Time (Hours): 0.5
    • Restriction IconProp 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
    (9 reviews)
    $299.99 Read more