Your cart is currently empty!
within 48 US States
Toyota Tacoma Overhead MOLLE Panel | 2016-2023
- Suits 2016-2023 Toyota Tacoma 4-Door models, short or long bed
- Adds an awesome mounting area against the ceiling above the rear seats
- You can mount gear to the bottom of the rack and also place small items between the rack and roof
- Compatible with molle accessories, molle pouches, and magnetic items.
- 14 GA Steel Construction
- Height down from roof is approx. 3″ (at rear dome light)
- Bolt-on installation, bolts where the factory grab handles were (not to be reinstalled)
- Approximate Molle mounting area is 9″ x 37″
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Made in the USA!!
$228.00
In StockDescription
Get the most out of your Tacoma’s ceiling space with All-Pro Off-Road’s Tacoma Overhead MOLLE Panel
2016-2023 Tacoma Overhead MOLLE Panel
All-Pro Off-Road’s 2016-2023 Tacoma Overhead Molle Panel is designed to maximize the storage space of your Tacoma. It offers customizable mounting for all of your gear. The Overhead Molle Panel provides mounting options for rifles, bear spray, flashlights, tire pressure gauges, and just about anything else you can think of that fits in a pouch. The available mounting area on the panel is 9″ x 37″. The panel mounts to the roof above the rear seat and does not cover the rear dome light. You can mount gear to the bottom of the rack and also place small items between the rack and roof. The panel is a completely “bolt-on” product with no drilling required for installation. The panel is CNC cut and formed from 14-gauge steel and comes standard with a long-lasting black powder coat finish. If desired, aftermarket grab handles should be purchased since the panel is not compatible with the original Tacoma grab handles.
NOTE: Customers are encouraged to mount heavier items closer to the sides where the rack mounts to the roof. It is up to the customer’s good judgment to not overload the rack.
- Suits 2016-2023 Toyota Tacoma 4-Door models, short or long bed
- Adds an awesome mounting area against the ceiling above the rear seats
- You can mount gear to the bottom of the rack and also place small items between the rack and roof
- Compatible with molle accessories, molle pouches, and magnetic items.
- 14 GA Steel Construction
- Height down from roof is approx. 3″ (at rear dome light)
- Bolt-on installation
- Approx. Molle mounting area is 9″ x 37″
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Made in the USA!!
Vehicle Suitability
2016 Toyota Tacoma Molle Panel
2017 Toyota Tacoma Molle Panel
2018 Toyota Tacoma Molle Panel
2019 Toyota Tacoma Molle Panel
2020 Toyota Tacoma Molle Panel
2021 Toyota Tacoma Molle Panel
2022 Toyota Tacoma Molle Panel
2023 Toyota Tacoma Molle Panel
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
-
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
Additional information
Weight | 11 lbs |
---|
12 reviews for Toyota Tacoma Overhead MOLLE Panel | 2016-2023
You must be logged in to post a review.
You may also like…
-
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Bed MOLLE Panel | 2005-2023
- Suits 2005-2023 Toyota Tacoma, short or long bed
- Adds an awesome mounting area against the back bed wall, below your back window, to attach all sorts of items to
- The panel can also be used to provide additional tie down locations for securing gear in the bed
- You will never run out of uses for this modular mounting panel
- Includes 11 Gauge Steel Molle Panel and Mounting Brackets
- Zinc Plated Mounting Hardware
- Panel has a Black Powder Coat Finish
- Compatible With or Without Factory Front Bed Accessory Bar
- .44” and .20”. Nominal Diameter Round Mounting Holes
- No Drilling is Required for Installation
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Short and Long Bed designs have different shapes and mounting holes, see photos to show the differences – they are not interchangeable
- Made in the USA!!
Rated 4.67 out of 5(10 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Bed Stiffener Kit | 2005-2023
- Suits 2005 to 2023 Toyota Tacoma, any bed length
- Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those
- Stiffens bed sides and makes them more rigid
- Recommended especially for tire clearance modifications or extra weight in the bed
- Provides additional tie down points for cargo
- Antenna whip or light mounting tab
- Some drilling is required for installation
- Installation Instructions
- Made in the USA!!
Rated 4.57 out of 5(7 reviews)
Related products
-
DobinsonsOn Sale All November!!
Dobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
Rated 5.00 out of 5(6 reviews) -
4Runner 4th Gen (2003-2009)On Sale All November!!
Dobinsons C59-354 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 390mm, 18mm wire, 730LB Rate
Rated 5.00 out of 5(9 reviews) -
ExcludedOn Sale All November!!
Dobinsons Tacoma L59-110-R Leaf Springs Pair for 2005-2023 (0-220LB Load)
- Suits 2005-2023 Toyota Tacoma. Lifts dual cab short beds 2-2.25″ with 0-220LBS load, and 1″ on a Long Bed
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Sold as a pair – they are not side-specific
Rated 5.00 out of 5(4 reviews) -
DobinsonsOn Sale All November!!ETA is early JAN 2025
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
Rated 5.00 out of 5(17 reviews)
Aaron (verified owner) –
This is my go-to now for off road parts.
William (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
David (verified owner) –
Great description on the page, easy to understand what I was buying.
Kevin (verified owner) –
Value for money, super satisfied.
Shawn (verified owner) –
Great description on the page, easy to understand what I was buying.
David (verified owner) –
Just what I needed.
Anthony (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Steven (verified owner) –
It’s exactly what I wanted.
Travis (verified owner) –
Value for money, super satisfied.
Nathan (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Jeremy (verified owner) –
Would definitely buy from this site again.
Aaron (verified owner) –
This is my go-to now for off road parts.