Your cart is currently empty!
Performance Upgrades - Tacoma 3rd Gen
Showing all 24 results
-
Suspension
Dobinsons High Clearance Inner CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete INNER kit includes 2 new INNER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Interior mold is hex shaped
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
Tacoma 3rd Gen (2016-2023)Ships FREE !!
within 48 US StatesDobinsons Tacoma Snorkel Kit for 2016-2023 3.5L V6
- Suits 2016-2023 4×4 Toyota Tacoma with a 3.5L V6 Gas Engine
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- FOR INSTALLATION INSTRUCTIONS, CLICK HERE
$395.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Complete CV Boot Kit | Long Travel for 2005-23 Tacoma
- Complete CV boot replacement kit – Suits 2005-2023 Toyota Tacoma
- Includes inner OEM-Style CV boots and outer LONG TRAVEL CV boots and all related clamps
- Does not require long travel suspension to run this kit
- Qty 2 – OEM-Style Neoprene Long Travel Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
$160.00 Add to cart -
FirestoneShips FREE !!
within 48 US StatesToyota Tacoma Firestone Airbag & Daystar Cradle Bundle
- Suits 2005-2023 Toyota Tacoma 4×4 Trucks
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions
- Firestone Airbag Kits do not have a warranty when used with Daystar Airbag Cradle Kit
- Enjoy full suspension travel and the benefits of air bags with the Daystar Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough Daystar polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Your Daystar Air Bag Cradle Kit is backed by a Lifetime Warranty
- Daystar cradle mounts to top of leaf spring, airbag mounts to frame above only
$629.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesToyota Tacoma Overland Tailgate Table | 2005-2023
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Tacoma owner should do.
- Made in 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Made in the USA, in sunny California!!
$250.00 Select options -
BrakesShips FREE !!
within 48 US StatesPowerbrake X-Line 4×4 Toyota Tacoma Big Brake Kit for 2005-2023 Stage 1
2005-2023 Toyota Tacoma Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- For 6-Lug models only (Pre-Runner and 4×4 models)
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
$2,675.00 Select options -
Performance Upgrades - Tacoma 3rd GenShips FREE !!
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Tacoma 4×4 2005-2023
- Suits Toyota Tacoma 2005-2015 and 2016-2023 Front – 4X4 6-Lug models (no option for 5-Lug models)
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
$810.00 Add to cart -
Differential | DrivetrainShips FREE !!
within 48 US StatesARB RD111 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.91+
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.91 And Up FactoryGears
- Usually all models that came with an automatic transmission used 3.91+ gear ratios, but some more modern Toyota and Lexus use 3.73 gears from the factory
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are changing to aftermarket gears, check with that gear manufacturer on which gears to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
$1,091.00 Select options -
Differential | DrivetrainShips FREE !!
within 48 US StatesARB RD129 Rear Air Locker Toyota 8.4″ 30 Spline
- For Use only with Toyota 8.4″ 12 Bolt 30 spline Rear Axle
- Suits multiple vehicles, the full list is down below. Used in older Tacoma, Sequoia, Tundra and T100 Trucks.
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
$1,091.00 Add to cart -
Differential | DrivetrainShips FREE !!
within 48 US StatesARB RD121 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.73-
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.73 And Down Factory Gears
- Usually all models that came with a manual transmission used 3.73- factory gear ratios, but you must check before ordering
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are re-gearing, check with the gear manufacturer for which Air Locker to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
$1,091.00 Select options -
Truck Caps + CanopiesShips FREE !!
within 48 US StatesETA is May 2024
Taking preorders nowMagPak Tacoma Camper Shell + Roof Top Tent Combo | Tacoma 2016-2023 5ft Bed
- Specifically suits 2016-2023 Toyota Tacoma Trucks with the short 5FT Bed length
- Pre-Production model shown in all photos and videos
- Check out the walk-around video down below in the description
- Integrated Roof Top Tent: Access the tent from inside the bed area
- Comfy Mattress: 2.5″ thick high density foam mattress
- Retractable Sleeping Area: Lift up the sleeping area to be able to stand up inside the camper for extra room during bad weather, to change clothes, or whatever you’d like
- Tough Fabrics: Premium 320G rip stop material construction of the tent
- Integrated LED Light Package: Strategically placed LED lights provide an inviting and functional glow
- No Drill Installation: Say goodbye to complex installations. Our no-drill installation process is hassle-free and preserves your truck’s integrity. You can have your camper ready for action in no time.
- Marine-Grade Stainless Construction: Engineered to withstand the harshest conditions, our camper is built to last. Crafted from aircraft-grade aluminum, it ensures longevity and corrosion resistance, ready to tackle any terrain.
- Textured Powder Coat Finish: The tough, textured powder coat finish not only adds a striking aesthetic but also provides extra protection against the elements, making your camper look great season after season.
- True Fit Technology: Say goodbye to the hassle of ill-fitting campers. Our True Fit Technology ensures a seamless and secure fit, giving your truck a sleek, integrated appearance.
- Waterproof Seals: Rain or shine, your cargo stays dry. Our camper features waterproof seals that create an impenetrable barrier against moisture, so you can venture into the unknown with confidence.
- Heavy-Duty Latches: Robust and dependable, our heavy-duty latches keep your camper securely closed, providing peace of mind whether you’re on or off the beaten path.
- Solid Hinges: Designed for longevity and strength, our solid hinges allow for smooth and reliable opening and closing of the camper, even after years of use.
- Tempered Glass: Safety is paramount. Our camper comes with Tempered glass, ensuring clear visibility and compliance with all safety standards.
- 3rd Brake Light: Added safety features for your peace of mind. The integrated third brake light enhances visibility, keeping you and those around you safe.
- High-Pressure Struts: Our camper boasts high-pressure struts, making it easy to access your gear while providing consistent and reliable support.
- 4 Year Warranty: We stand behind our product’s quality. Enjoy peace of mind with a 4 year warranty, ensuring your camper will be by your side for all your future journeys.
- Shipping Weight: 450 LBS
- Shipping Measurements: 120 x 70 x 42″
- Country of Origin: China
- Ships from the fulfillment warehouse in California on a pallet by LTL Freight, the freight line will be in touch with you to setup a delivery appointment
- We strongly recommend you keep the shipping insurance on your order during checkout, in case of any damage in transit, it will be covered
$7,999.99 Add to cart -
Truck Caps + CanopiesShips FREE !!
within 48 US StatesETA is April 2024Expedition Truck Cap with Full Wing Doors | Tacoma 2016-2023 5ft Bed
- Specifically suits 2016-2023 Toyota Tacoma Trucks with the short 5FT Bed length
- No Drill Installation: Say goodbye to complex installations. Our no-drill installation process is hassle-free and preserves your truck’s integrity. You can have your topper ready for action in no time.
- Marine-Grade Stainless Construction: Engineered to withstand the harshest conditions, our topper is built to last. Crafted from marine-grade stainless steel, it ensures longevity and corrosion resistance, ready to tackle any terrain.
- Textured Powder Coat Finish: The tough, textured powder coat finish not only adds a striking aesthetic but also provides extra protection against the elements, making your topper look great season after season.
- True Fit Technology: Say goodbye to the hassle of ill-fitting toppers. Our True Fit Technology ensures a seamless and secure fit, giving your truck a sleek, integrated appearance.
- Built-In Air Vent: Stay comfortable on the go with our integrated air vent. It ensures proper ventilation inside the topper, keeping your gear and equipment in optimal condition.
- Waterproof Seals: Rain or shine, your cargo stays dry. Our topper features waterproof seals that create an impenetrable barrier against moisture, so you can venture into the unknown with confidence.
- Heavy-Duty Latches: Robust and dependable, our heavy-duty latches keep your topper securely closed, providing peace of mind whether you’re on or off the beaten path.
- Solid Hinges: Designed for longevity and strength, our solid hinges allow for smooth and reliable opening and closing of the topper, even after years of use.
- Tempered Glass: Safety is paramount. Our topper comes with Tempered glass, ensuring clear visibility and compliance with all safety standards.
- 3rd Brake Light: Added safety features for your peace of mind. The integrated third brake light enhances visibility, keeping you and those around you safe.
- High-Pressure Struts: Our topper boasts high-pressure struts, making it easy to access your gear while providing consistent and reliable support.
- Modular Construction: Customize your topper to fit your needs. Our modular construction allows you to add or remove components easily, adapting to various adventures.
- Lifetime Warranty: We stand behind our product’s quality. Enjoy peace of mind with a lifetime warranty, ensuring your topper will be by your side for all your future journeys.
- Roof Rails and Crossbars: Take your adventures to the next level with our built-in roof rails and optional crossbars. They provide ample space to carry additional gear, bikes, kayaks, and more, allowing you to maximize your outdoor experiences.
- Dry Weight: 230 LBS
- Dynamic Weight Capacity: 325 LBS
- Static Weight Capacity: 750 LBS
- Measurements: 62 x 54 x 28″
- Country of Origin: China
- Ships from the fulfillment warehouse in California on a pallet by LTL Freight, the freight line will be in touch with you to setup a delivery appointment
- We strongly recommend you keep the shipping insurance on your order during checkout, in case of any damage in transit, it will be covered
$2,499.99 Add to cart -
Bump StopsShips FREE !!
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
From $1,090.00 Select options -
Airbag KitsShips FREE !!
within 48 US StatesToyota Tacoma Firestone 2407 Airbag Kit
- Suits 2005-2023 Toyota Tacoma 4×4 Trucks
- Intended for stock height leaf springs and shocks
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions
$539.00 Add to cart -
AccessoriesShips FREE !!
within 48 US States4 Tire Inflation System – Toyota Tacoma Engine Bay Mount
- Suits 2016-2023 Toyota Tacoma Models
- Air It Up 4 Tire Inflation System can deflate, and automatically inflate or equalize 4 tires at the same time.
- Includes ADS Controller Box, 90 psi Pressure Regulator, 150 psi Blow-off Valve.
- ADS Controller features 2 inlet valves with permanent or portable air source.
- Includes Pre-cut Hoses, Push To Connect Fittings, and everything that is needed for easy installation.
- Includes 8 Quick Connect Chucks with the easy to use Betty Bar feature and 4 Green Tire Connect Whips with a Storage Bag
- Heavy Duty Construction with DOT approved hoses and fittings.
- Designed to work with the EGOI 2 Air Compressor, ARB and Viair Compressors
- Complete line of Air Compressor Bracket Kits Available for Under Engine, Under Seat, and Rear Cargo Area Mounting Solutions.
- 5-Year Limited Month Warranty
Original price was: $299.99.$249.99Current price is: $249.99. Add to cart -
AccessoriesShips FREE !!
within 48 US StatesCompressor Mount & Connection Kit – Tacoma Engine Bay for ARB & UDA Dual Air Compressor – Black
- 16-22 Toyota Tacoma Engine Mount Install Bracket Kit.
- For ARB Dual Air Compressor
- Designed to fit into your engine bay
- Heavy Duty Mounting Bracket and hardware
- Powder Coated Black
- 23 inch Hi Temp/Hi Pressure Air Line Hose
- 2 x 90 degree 3/8 Inch Swivel Push-to-Connect Fitting
$149.99 Read more -
Snorkel
Safari Snorkel SS172HP – Toyota Tacoma 3rd Gen 2016-2023
- Suits Toyota Tacoma 2016-2023 Models – 3rd Gen Tacoma
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions
- Vehicle specific design and factory airbox adaption fitment
- Manufactured using durable, UV stable cross linked polyethylene material
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided
$627.00 Add to cart