WHEELER'S OFF-ROAD 1.5" LIFT ADD-A-LEAF SET FOR 1996-2004 TOYOTA TACOMA

Wheeler’s 1.5″ Lift Add-A-Leaf Set for 1996-2004 Tacoma

  • Suits 1996 to 2004 Tacoma 4×4 and Pre-Runner
  • Includes 2 single add-a-leafs and 2 longer center pins
  • Works with factory length u-bolts or aftermarket
  • Adds 1.5″ of lift approximately on dual cab short bed models.  Single or Access cab models may see different lift heights
  • Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
  • Feature diamond cut ends and anti-friction pads for smooth, squeak free performance
  • Instructions

$125.00

In Stock
Share (0)
Total: 0 Total: 0
SKU: WHE-AAL20-KIT Categories: , , , , , Brand:

Description

WHEELER’S OFF-ROAD 1.5″ LIFT ADD-A-LEAF SET FOR 1996-2004 TOYOTA TACOMA

This Wheeler’s Off-Road single leaf Add-A-Leaf Set (2 leafs) is made specifically for the 1996 to 2004 4×4 and Pre-runner Toyota Tacoma.  They work with your factory length u-bolts or aftermarket.

Wheeler’s Off-Road custom manufactures add a leaf kits for 96-04 Tacoma trucks. Our add a leaf kits feature  diamond cut ends and anti-friction pads for smooth, squeak free performance. They are tuned to enhance load performance while providing a good ride. Center Pins are included.

***NOTE: Lift amounts are approximate. Heavier weight Tacoma trucks may experience less lift than listed.

Related products

  • Dobinsons Square Top Ubolts
    Tacoma 3rd Gen (2016-2023)

    Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
    • Made from the highest quality raw materials to give years of life under the harshest conditions
    • Over 60 years of leaf spring design and manufacturing
    • Includes 4 U-bolts, enough for 1 vehicle
    • Requires 2″ lift leaf springs to ensure proper fitment
    • Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
    • Photos for illustration purposes.  These are square at the top
    • These U-bolts are 180mm in length.  If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
    $90.00 Add to cart
  • Dobinsons MRA59-A682 MRA59-A685 MRA59-A687
    • Dobinsons MRA59-A682 MRA59-A685 MRA59-A687
    • Dobinsons MRA59-A682 installed
    • dobinsons mra
    Suspension
    Ships FREE !!
    within 48 US States

    Dobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks | 80 Series 6″ Lift
    • Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
    • 3-way adjustable valving – Adjust high and low speed compression and rebound
    • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
    • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
    • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
    • 20 Stage Low Speed Compression – For creepy crawling and cornering
    • 15 Stage Rebound – Control your coils, prevent bucking
    • 60mm CNC Machined High Flow Billet Aluminum Race Piston
    • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
    • Upgraded 3 Stage FKM‐HNBR Sealing System
    • TSUGAMI™ CNC machined components for precise tolerances
    • Parker™ Braided High Pressure Hoses
    • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
    • T6 6061 Height Adjustable Spring Seat
    • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
    • 60mm Full 6063 aluminum remote reservoir
    • Lightweight CNC Machined Low Friction floating piston
    • High Quality O.E.M. Grade Natural Rubber Bushings
    • Single Piece Lower Leg
    • EDP Surface Protection
    • CNC TIG Precision Welded Body End Mounts
    • Fully Rebuildable Design
    • SOLD IN PAIRS
    • Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
    • Full 2 year limited warranty, no set rebuild time period
    • 714mm extended, 440mm compressed
    • Installation Instructions of the MRA Shocks
    $1,350.00 Add to cart
  • dobinsons trailing arms
    • dobinsons trailing arms
    Dobinsons

    Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
    • Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
    • Zinc plated, then powder coated black, for the ultimate finish and protection
    $405.00 Add to cart
  • Dobinsons variable rate rear coil springs pair
    • Dobinsons variable rate rear coil springs pair
    • Dobinsons C59-701V installed
    Dobinsons

    Dobinsons C59-701V Rear UHD Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 500mm free height, 17mm wire diameter, 210-245LBF/IN variable spring Rate
    $305.00 Select options