Sale!
Dobinsons MRA kit
Dobinsons MRA kit with black coil springs front and rear
Dobinsons MRA kit with red coil springs front and rear
Lexus GX460 with Dobinsons 2" front and rear suspension lift installed
dobinsons mra rear shocks installed
Dobinsons MRA Rear Shocks Lower Mount Rebound Adjuster
dobinsons mra rear shocks installed
Dobinsons MRA59-A700 MRA installed on a 5th Gen Toyota 4Runner
FREE SHIPPING
within 48 US States
On Sale All November!!

Dobinsons 3-Way Adjustable MRA GX460 Lift Kit | 2010-2023 (1.5-3.5″)

(13 customer reviews)
  • Every MRA suspension option from Dobinsons to lift your Lexus GX460 all on one page
  • Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • External Remote Oil Reservoir with dual speed compression adjustment
  • Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
  • Triple Lip Oil Seal for Superior Lifespan
  • Direct Bolt-on, Fully Rebuildable Design
  • Pre-Charged with Nitrogen, Ready to be Assembled and Installed
  • EDP Surface Protection, 3mm Heavy Duty Wall Thickness
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs
  • Installation Instructions for Front Resi Mounts and Rear Resi Mounts
  • Front height adjustment instructions

Original price was: $2,970.00.Current price is: $2,524.50.

In Stock
Select Front Coils
OE spring rate on a V8 GX460 is 730LB (same as the C59-350, 352,354). Lighter than stock springs shouldn't be use unless you want it softer than stock, which will increase nose diving while braking.
Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
C59-300 - 1.5" with stock weight (comfort spring rate)
C59-302 - 2.0" with stock weight (comfort spring rate)
C59-314 - 2.5" with stock weight (comfort spring rate)
C59-350 - 2" with stock weight
C59-352 - 2.5" with stock weight, 2" with 110-220lbs weight
C59-354 - 2" with 220-350lbs weight, 2.5" with 110lbs weight
Select Front Struts
Ending with 700 is the standard replacement front struts used for 0-3" of lift. The 574's have additional length and extended travel for lifts of 2-3.5", set appropriately with the correct coils. Example, a 2" coil with the Extended travel struts set to the taller coil seat height gives 3" of lift
MRA59-A700 - MRA 3-way adjustable w/resi monotube (0-2.5" lifts)
MRA59-A574 - MRA 3-way adj w/resi monotube Extended travel (2-3.5" lifts)
Select Rear Coils
Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4"
Vehicles with KDSS lifting 1.5" or more should add a PS59-4025 trim spacer for the passenger side
C59-323 - Stock height up to 1/2" lift
C59-599 - 3/4-1" with stock weight
C59-505 - 1.25-1.5" with stock weight
C59-325 - 1.75-2" with stock weight
C59-327 - 1.75" with 200-400lbs weight, 2.25" stock weight
C59-329 - 1.75" with 400-800lbs weight
C59-331 - 1.75" with 800-1200lbs weight (teal only)
C59-675V - 2.25" with stock weight - variable rate coil
C59-677V - 3" with stock weight, 2.5" with 200-300LBS - variable rate coil
C59-701V - 3" with 300-600LBS of constant weight - variable rate coil
C59-749V - 3" with 600-800LBS or more of constant weight - variable rate coil
C59-849V - 3" long travel, 1000LBS+ constant rear load (TEAL ONLY)
Need to Convert From Airbags to Coils?
Dobinsons airbag to coil conversion kit is what you'll need. This kit adds 1/2" to listed coil height
Select Rear Shocks
MRA59-A701 - MRA 3-way adjustable w/resi monotube (0-3" lift)
**Note: Dobinsons makes long travel rear shocks, but since almost all GX460 have KDSS in the USA, they cannot be used with KDSS, so they are not listed here as an option to purchase. If your vehicle doesn't have KDSS or you've removed it and want long travel rear shocks, email us directly for us to manually make an order for you.
Add New UCA's?
New Upper Control Arms (UCA's) can greatly increase the quality of the wheel alignment, mainly in the caster setting, improving steering and handling. Should be used for 2.5″ or more of lift
Add a Diff Drop Kit?
Diff drop kit is for 3″+ lift, or when using 574 long travel struts
Add New Strut Mounts?
If you want to add new front strut top mounts so you don't have to separate the old coilovers and reuse the mounts, add that here.
Add Front Strut Assembly?
If you want the front coils, struts and new strut mounts (must be added above) to be assembled prior to shipping, add that here
Assembled Coil Seat Height
If you've chosen to have the struts assembled, select what coil seat height you would like. Standard is 213mm and only the coils do the lifting. 220mm adds 1/2" of lift. 226mm adds 1" of lift, so using a 2" coil with the 226mm raised seat height gives 3" of lift, for example
Add Front Swaybar Relocation Kit? (only non-KDSS vehicles)
The Dobinsons front swaybar relocation kit repositions the front sway bar (non KDSS models only) for proper clearance and working angle when lifted 2" or more.
Add Extended Front Sway Bar Links? (only non-KDSS vehicles)
Factory sway bar links are prone to bending and breaking and can even puncture your CV boots. All-Pro's heavy-duty Toyota front sway bar links replace the weak stock links using top quality Teflon lined 3/4" Heim Joints and hefty .156 wall DOM tubing.
Add Extended Rear Sway Bar Links? (only non-KDSS vehicles)
For 2" or more, the stock sway bar angle is out of alignment and inhibits proper articulation and comfort. Adding longer links corrects this
Add KDSS Spacers?
When lifting the vehicle 2" or more with KDSS, the KDSS Spacer Kit from Treaty Oak Offroad will need to be added to level out the sway bars front and rear to balance the vehicle (removing lean) and also provide additional wheel travel without the KDSS system limiting the suspension travel.  This spacer kit bolts between the original sway bar mounts, 1 on the front and 2 on the rear.  Some trimming of some skid plates up front may be required if they don't allow enough clearance for the sway bar at full droop with the Treaty Oak Spacer kit installed.
This is a requirement for any 3" rear lift
Add Front Bump Stops?
If you regularly offroad, extending your bump stops helps reduce the harsh impact when the front bottoms out. Click the small box to the right of the product for more information.
Add Rear Bump Stops?
For those who regularly offroad and stand a chance to bottom out more often, or for those running the 575 long travel shocks, new bump stops should be added
Add Rear Panhard Rod?
A heavy duty adjustable panhard rod will allow you to re-center your axle. This can also be used with any height, but for those needing a stronger panhard rod than stock
Add New Front High-Clearance CV Boots?
If your vehicle is older, and you plan to lift 3" or more, new high-clearance CV boots are a great option
Add Rear Trailing Arms?
For heavy offroading, or for true long travel, new upper and lower adjustable trailing arms help correct pinion angle, give better articulation, and are much much stronger than stock
Add Rear Trailing Arm Skids?
Protect the vulnerable rear lower link mounts on your vehicle with a pair of lower link skids from RCI Metalworks
Add Rear Lower Shock Mount Skids?
Protect your rear low hanging shock mounts with RCI heavy duty rear shock mount skid plates
Add Airbags?
If you regularly tow with your vehicle, carry a motorcycle on a hitch mount, or have huge variances between daily weight and loaded trip weight, a set of Firestone helper air springs will be very useful. Inserts inside your rear coil springs to add additional load support, Manually inflate or deflate the air bags to add or remove support or height.
Firestone 4135 is for 0-1.5" of lift
Firestone 4108 is for 2-3" of lift
Upgrade Front Brakes?
This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors (requires 17" wheels)
Upgrade Rear Brakes?
This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts
Share (0)
Total: 0 Total: 0
SKU: GX460MRAKIT Categories: , , , , , Tags: , , Brand:

Description

A Lexus GX460 MRA lift kit – Dobinsons offers this complete suspension system for the 2010 to 2023 Lexus GX460 4.6L V8, with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height.  Contact Dobinsons directly if you have questions before ordering your Lexus GX460 lift kit.

Most customers when buying a Lexus GX460 MRA lift kit add 3″ of lift to the front and around 2″ to the rear, to help level out the vehicle from front to back.  You have your choice though of how you would like it to be.

A lift of 3″ in the front requires new Upper Control Arms for proper alignment and good ride quality.  These are sold separately.

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

MRA Struts/Shocks Features

  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • External Remote Oil Reservoir with dual speed compression adjustment
  • Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
  • Triple Lip Oil Seal for Superior Lifespan
  • Direct Bolt-on, Fully Rebuildable Design
  • Pre-Charged with Nitrogen, Ready to be Assembled and Installed
  • EDP Surface Protection, 3mm Heavy Duty Wall Thickness
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period

dobinsons mra

Built on the Back of the Race Winning Monotube Remote Reservoir (MRR) Shock Absorbers, Dobinsons new range of MRR Adjustable Shock Absorbers combine the best in high performance race-bred Monotube Technology, with an  all new 3-way dampening adjustment system to turn your 4×4 into the ultimate off-road machine.  Each component of the MRR Shock Absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.

The new 6063 honed Aluminum reservoir, revised light-weight floating piston, Carbon Fiber / PTFE / Disulphide composite wear band, improved 3 stage sealing system, and the ability to run lower gas pressure with the addition of the reservoir compression adjuster; have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and dampening performance.  The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.

The Micro Polished, Hard Chromed and Heat Treated shock shaft, revised CNC aluminum high flow race piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.  The 3 Way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

***2.5″ or more of lift, new UCA’s are recommended***
NOTE: For a lift of 3″ in the rear, new extended brake lines and minimum of 2″ bump stop extensions are required to be used with our long travel rear shocks.  At full extension, the stock brake lines could get damaged, and with stock bump stops in place, the shocks will bottom out before the bump stop fully engages, which will quickly destroy the shocks.
Lifting the rear of the vehicle more than 2″ with KDSS, KDSS Rear Spacer Kit from Treaty Oak Offroad will need to be added to level out the sway bars front and rear and also provide additional wheel travel without the KDSS system limiting the suspension travel.  This spacer kit bolts between the original sway bar mounts, 1 on the front and 2 on the rear.  Some trimming of some skid plates up front may be required if they don’t allow enough clearance for the sway bar at full droop with the Treaty Oak Spacer kit installed.
Video on the MRA struts and how to set the adjusters: https://youtu.be/na5NvdfxOrM

2010 Lexus GX460 Lift Kit
2011 Lexus GX460 Lift Kit
2012 Lexus GX460 Lift Kit
2013 Lexus GX460 Lift Kit
2014 Lexus GX460 Lift Kit
2015 Lexus GX460 Lift Kit
2016 Lexus GX460 Lift Kit
2017 Lexus GX460 Lift Kit
2018 Lexus GX460 Lift Kit
2019 Lexus GX460 Lift Kit
2020 Lexus GX460 Lift Kit
2021 Lexus GX460 Lift Kit
2022 Lexus GX460 Lift Kit
2023 Lexus GX460 Lift Kit

13 reviews for Dobinsons 3-Way Adjustable MRA GX460 Lift Kit | 2010-2023 (1.5-3.5″)

  1. Ryan (verified owner) –

    Very good customer service, super friendly.

  2. Justin (verified owner) –

    *****

  3. Joshua (verified owner) –

    Great description on the page, easy to understand what I was buying.

  4. William (verified owner) –

    Would definitely buy from this site again.

  5. Edward (verified owner) –

    Just what I needed.

  6. Paul (verified owner) –

    I received it really fast.

  7. Eric (verified owner) –

    Great description on the page, easy to understand what I was buying.

  8. Kevin (verified owner) –

    5 Stars!!

  9. Scott (verified owner) –

    Would definitely buy from this site again.

  10. Jacob (verified owner) –

    Very good customer service, super friendly.

  11. Anthony (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  12. David (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  13. Jose (verified owner) –

    Value for money, super satisfied.

Add a review

You may also like…

  • Timbren Rear Active Bump Stops ABSTORSEQ
    • Timbren Rear Active Bump Stops ABSTORSEQ
    • Timbren Rear Active Bump Stops ABSTORSEQ
    Timbren
    FREE SHIPPING
    within 48 US States
    Take 10% off with Coupon
    Code "BLACKFRIDAY"!!

    Timbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s
    • Maintain Full Axle Travel
    • Smooth Axle Engagement and Disengagement
    • Enhance Suspension Performance
    • Progressive Spring Rate
    • Absorbs Energy and Cushions Road Shocks
    • Stronger Than OEM Bumpstops
    • Easy Installation
    • Satisfaction Guarantee
    • Lifetime Warranty
    • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series

    • Specs:

      • 2,000 lb capacity
      • 4,800 lb bump load capacity
      • Overall kit height = 5”
      • Total deflected (compressed) height = 2.75”
      • Amount of deflection (compression) = 2.25”
    • Click here for instructions
    • Installation video from Exit Offroad
    • Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs.  Timbren make 2 options, they do not include any longer bolts which may be required
      • A25722-90F00 (1/2″ spacer)
      • A25723-90AD00 (1″ spacer)
    (13 reviews)
    $269.36 Add to cart
  • Timbren Front Active Bump Stops ABSTOF
    • Timbren Front Active Bump Stops ABSTOF
    • Timbren Front Active Bump Stops
    Timbren
    FREE SHIPPING
    within 48 US States
    Take 10% off with Coupon
    Code "BLACKFRIDAY"!!

    Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
    • Suits 2000-2024 Tundra,  2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
    • Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
    • Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all.  Inspect your vehicle before ordering
    • Maintain Full Axle Travel
    • Smooth Axle Engagement and Disengagement
    • Enhance Suspension Performance
    • Progressive Spring Rate
    • Absorbs Energy and Cushions Road Shocks
    • Stronger Than OEM Bumpstops
    • Easy Installation – Installation Video
    • Satisfaction Guarantee
    • Lifetime Warranty
    • Click here for instructions
    (12 reviews)
    $269.36 Add to cart

Related products

  • Sale! Dobinsons pair of shocks
    • Dobinsons pair of shocks
    • Dobinsons Twin Tube Shocks in black paint
    • Dobinsons GS59-940 rear shocks on a Tacoma installed
    Dobinsons
    On Sale All November!!

    Dobinsons GS59-940 Pair Rear Shocks | Tacoma 05-23 Tundra 00-06
    • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
    • Superior Design, thicker walls, longer travel
    • Japanese NOK Multi-Lip seals
    • Fuchs German shock absorber oil
    • Natural Rubber Bushings for reduced noise vibration and flexibility
    • Teflon Piston Rings
    • Double Chrome hardened rods
    • Metal shock boots to protect rod from damage
    • Matched to compliment Dobinsons Complete Suspension Systems
    • Dobinsons GS59-940 Specifications: 614mm extended, 361mm compressed, 50mm body size
    • Pin mount top, eyelet lower
    • Available in Yellow or Black
    • Sold in pairs
    (6 reviews)
    Original price was: $310.00.Current price is: $263.50. Select options This product has multiple variants. The options may be chosen on the product page
  • Sale! Quick ride yellow and teal
    • Quick ride yellow and teal
    • Quick ride yellow and red
    • Quick ride yellow and black
    Tacoma 3rd Gen (2016-2023)
    On Sale All November!!

    Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
    • 4×4 Access Cab models come with 1″ front lift from the factory.  Lift heights listed are for Dual cab 4×4 models.  Subtract 1″ for access cab models
    • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • Coils are specifically suited to the additional accessory load (weight) on the vehicle
    • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
    • You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
    • For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
    • Select desired lift height and additional options
    (13 reviews)
    Original price was: $930.00.Current price is: $790.50. Select options
  • Sale! Dobinsons 4" lift kit for 80 series
    • Dobinsons 4" lift kit for 80 series
    • Dobinsons Caster Plate Kit for 80 Series
    80 Series Land Cruiser (1990-1997)
    On Sale All November!!

    Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
    • Suits Land Cruiser 80 Series and Lexus LX450
    • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • **Kit photo shows with every additional option purchased**
    • Coils are specifically suited to match OE spec and height
    • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines.  Make selections below
    • Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
    • You must choose what coils, shocks and other components you want to add
    (13 reviews)
    Original price was: $1,510.00.Current price is: $1,283.50. Select options
  • Sale! DOBINSONS WA59-522K ADJUSTABLE REAR UPPER TRAILING ARMS | 4RUNNER FJ CRUISER GX470 GX460
    • DOBINSONS WA59-522K ADJUSTABLE REAR UPPER TRAILING ARMS | 4RUNNER FJ CRUISER GX470 GX460
    • Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460 vs stock
    4Runner 4th Gen (2003-2009)
    On Sale All November!!

    Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
    • Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
    • Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
    • Zinc plated, then powder coated black, for the ultimate finish and protection
    • Instructions written down below in the description
    (12 reviews)
    Original price was: $345.00.Current price is: $293.25. Add to cart