Your cart is currently empty!
within 48 US States
ARB 5421100 Skid Plate Kit | Toyota 4Runner 4th Gen 2003-2009
- Suits all Toyota 4Runner 4th Gen models from 2003 to 2009. Also fits 5th Gen 4runners without KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
$579.95
In StockDescription
ARB 5421100 Under Vehicle Protection Kit | Toyota 4Runner 2003-2009 4th Gen
Designed to give protection to vital underbody components including steering, engine sump, transmission and transfer case, ARB 5421100 Under Vehicle Protection Panels are laser cut, press formed and folded to provide protection to vulnerable under body components.
ARB’s new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage.
Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan and transfer cases will all be safe.
The ARB 5421100 Under Vehicle Protection will fit with or without an ARB front bar. Fitment has not been confirmed with other bar designs.
Specifications
Press formed and expertly folded for optimum strength to weight.
The first skid plate panel system specifically designed for SUVs, these panels feature the same construction as the current range of panels, i.e. pressed and folded 3mm steel.
Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
ARB 5421100 Key Features
Manufactured from 3mm zinc-plated and powder-coated, Laser cut steel. pressed and folded sheet steel adds more strength than a standard folded sheet.
The transmission panel is common to both kits and also to petrol and diesel engine variants. It has a two position mounting bracket providing a lower mount for petrol engine vehicles where the exhaust sits lower than diesel models.
Underbody
Designed to protect vital underbody components including steering, engine oil pan, transmission and transfercase
Vehicle Chassis
Securely bolted to the vehicle’s chassis providing outstanding structural integrity
CAUTION is required when removing foreign matter with hands while vehicle is hot or running. Replace any components as necessary.
Textured Finish
All steel components are zinc plated and powder coated in a silver textured finish
Service
Easily removed for vehicle servicing.
During servicing when panels are removed ensure fasteners are re-fitted to the correct torque values.
Vehicle Fitment:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
Additional information
Weight | 55 lbs |
---|
8 reviews for ARB 5421100 Skid Plate Kit | Toyota 4Runner 4th Gen 2003-2009
You must be logged in to post a review.
Related products
-
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
Rated 5.00 out of 5(15 reviews) -
Dobinsons
Dobinsons C59-505 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 405mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
- Add a PS59-4025 trim spacer if used with KDSS
Rated 5.00 out of 5(22 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-677V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 500mm free height, 16mm wire diameter, 157-230LBF/IN variable spring Rate
- Rear Long Travel Coils Installation Guide
Rated 5.00 out of 5(23 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
Rated 5.00 out of 5(12 reviews)
Edward (verified owner) –
Would definitely buy from this site again.
Jeffrey (verified owner) –
5 Stars!!
Aaron (verified owner) –
Just what I needed.
Matthew (verified owner) –
Very fast delivery.
Nicholas (verified owner) –
*****
Kevin (verified owner) –
Very fast delivery.
Edward (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Bradley (verified owner) –
I received it really fast.