Your cart is currently empty!
ARB 5421110 Under Vehicle Protection Kit | Lexus GX460 (with KDSS)
- Suits all Lexus GX460 models WITH KDSS. Also suits 5th Gen 4Runner with KDSS
- You must check to make sure you have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
$575.00
In StockDescription
ARB 5421110 Under Vehicle Protection Kit | Lexus GX460 WITH KDSS
Designed to give protection to vital underbody components including steering, engine sump, transmission and transfer case, ARB 5421110 Under Vehicle Protection Panels are laser cut, press formed and folded to provide protection to vulnerable under body components.
ARB’s new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage.
Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan and transfer cases will all be safe.
The ARB 5421110 Under Vehicle Protection will fit with or without an ARB front bar. Fitment has not been confirmed with other bar designs.
Specifications
Press formed and expertly folded for optimum strength to weight.
The first skid plate panel system specifically designed for SUVs, these panels feature the same construction as the current range of panels, i.e. pressed and folded 3mm steel.
Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
ARB 5421110 Key Features
Manufactured from 3mm zinc-plated and powder-coated, Laser cut steel. pressed and folded sheet steel adds more strength than a standard folded sheet.
The transmission panel is common to both kits and also to petrol and diesel engine variants. It has a two position mounting bracket providing a lower mount for petrol engine vehicles where the exhaust sits lower than diesel models.
Underbody
Designed to protect vital underbody components including steering, engine oil pan, transmission and transfercase
Vehicle Chassis
Securely bolted to the vehicle’s chassis providing outstanding structural integrity
CAUTION is required when removing foreign matter with hands while vehicle is hot or running. Replace any components as necessary.
Textured Finish
All steel components are zinc plated and powder coated in a silver textured finish
Service
Easily removed for vehicle servicing.
During servicing when panels are removed ensure fasteners are re-fitted to the correct torque values.
Additional information
Weight | 57 lbs |
---|
Related products
-
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
$405.00 Add to cart -
Dobinsons
Dobinsons C59-323 Stock Height Rear Coil Springs for GX460 GX470 FJ 4Runner 03-23
- Suits Lexus GX470, GX460 and 2003-2024 Toyota 4Runner and FJ Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 375mm, 17mm wire, 220LB Rate
- Note: Whilst these were made as stock replacement springs, some customers report a little lift over OE stock height. They should sit between 22-22.5″ from the center of the hub up to the fender. Variations in vehicle models, weight, and how the vehicle is loaded can affect the final ride height
- If you regularly tow or carry heavy loads, consider adding the Timbren SES Kit for added support
$270.00 Select options -
4Runner 4th Gen (2003-2009)
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
$345.00 Add to cart -
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
$75.00 Add to cart