80 Series IMS Dobinsons IMS Suspension Kit
Dobinsons Pair of IMS Shocks
dobinsons IMS specifications specs sheet
Dobinsons Caster Plate Kit for 80 Series
Dobinsons rear coil springs in teal color
Dobinsons WA59-545K adjustable rear upper control arms for an 80 series Landcruiser
WA59-556K DOBINSONS ADJUSTABLE REAR LOWER CONTROL ARMS | LAND CRUISER 80 SERIES
Dobinsons 80 series snorkel and MRA kit 4" lift kit
Dobinsons 80 series snorkel and MRA kit 4" lift kit
Dobinsons C59-612V 3 inch front coils with IMS45-60912 4-5 inch IMS shocks
Dobinsons C59-613V 3 inch rear coils with IMS59-60687 4-5 inch IMS shocks

Dobinsons 3.5-4″ IMS Lift Kit Builder | Land Cruiser 80 Series

(12 customer reviews)
  • Suits Land Cruiser 80 Series and Lexus LX450
  • Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • **Kit photo shows with additional options purchased**
  • Coils are specifically suited to match OE spec and height
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • IMS Shocks are Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension
  • A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
  • You must choose what coils, shocks and other components you want to add

$2,110.00

In Stock
Select Front Coils
C97-144VT - 3.5" lift with 220LBS+ Dual Rate Long Travel
C59-614V - 4″ Lift Flexi (variable rate) up to 220LBS Load
C59-308 - 4″ Lift (linear rate) with up to160LBS Load (light bumper, or winch)
C59-312 - 4″ Lift (linear rate) with 160-300LBS Load (bumper, winch, 2nd battery, etc), 5-6" with Stock weight
Select Rear Coils
C97-145VT - 3.5" with 400LBS+ Load Dual Rate Long Travel
C59-615V - 4″ lift with up to 200 LBS (Flexi coils, variable rate)
c59-309 - 4″ lift with up to 220lbs weight (linear rate)
c59-313 - 4″ lift with 400-750lbs weight (linear rate)
Front Shocks
Select what shocks you'd like. Keep in mind that the long travel shocks require additional bump stop spacing than normal to ensure they don't bottom out. Long travel shocks can't be used with the linear rate coils
Rear Shocks
Select what shocks you'd like. Keep in mind that the long travel shocks require additional bump stop spacing than normal to ensure they don't bottom out. Long travel shocks can't be used with the linear rate coils
Front Caster Correction Plates
Dobinsons 5 degree caster correction plates, corrects the front alignment angle when lifting 4" or more
Front Panhard Rod
Needed for 3" of lift or more, Dobinsons adjustable panhard rod re-centers the axle properly. Choose left or right hand drive
Rear Panhard Rod
Needed for 3" of lift or more, Dobinsons adjustable panhard rod re-centers the axle properly. Same for left and right hand drive
Add Front Steering Damper?
This is optional, but it's recommended with a full suspension upgrade
Add Front Sway Bar Extension Brackets?
These are required when lifting 3" or more to correct the sway bar angle
Add Rear Sway Bar Extension Brackets?
To correct the rear sway bar angle with lifts of 1.5" or more, helps with articulation also. SE59-517 mounts to the side of the chassis, SE59-519 to the bottom of the chassis. Go and physically verify what brackets you have on your vehicle before you place an order
Add Rear Upper or Lower Trailing Arms?
Here you can select if you want to add some new heavy duty adjustable rear upper and lower trailing arms. These are highly recommended with 4" or more of lift to correct the pinion angle. Select the bundle to add both at the same time
Rear LSPV Extension
The rear Load Sensing Proportioning Valve won't work properly without this bracket in place on top of the rear axle
Add Front Bump Stop Extensions?
These space down the outer and inner bump stops by 1″ (25mm) or 2″ (50mm) when stacked together. This is very important when running longer shocks for 3″ or more of lift where the shocks are longer at full compression than standard shocks. If you don’t space down the bump stops so that they engage before the shock bottoms out, then you risk blowing out the shocks
Add Rear Bump Stop Extensions?
These space down the outer and inner bump stops by 1″ (25mm) or 2″ (50mm) when stacked together. This is very important when running longer shocks for 3″ or more of lift where the shocks are longer at full compression than standard shocks. If you don’t space down the bump stops so that they engage before the shock bottoms out, then you risk blowing out the shocks
Add Front Bump Stops?
Running a bigger lift with longer shocks usually requires new bump stops to control the compressed length of the shocks and also provide a better bottom-out than the old stock bump stops. Extensions or adjustments may still be needed
Click small square box on the right for full details
Add Rear Bump Stops?
Running a bigger lift with longer shocks usually requires new bump stops to control the compressed length of the shocks and also provide a better bottom-out than the old stock bump stops. Extensions or adjustments may still be needed
Click small square box on the right for full details
Add Extended Brake Lines?
Extended brake lines are required whenever using shocks for taller than a 3" lift, due to their extended down travel. Pay attention to the year range, as they're very specific
Add Front Coil Spacer(s)?
If you want to fine tune the lift height, you can add a coil spacer or 2 on top of the coils you've selected. These are sold individually, so order 2 to lift both left and right side evenly
Add Rear Coil Spacer(s)?
If you want to fine tune the lift height, you can add a coil spacer or 2 on top of the coils you've selected. These are sold individually, so order 2 to lift both left and right side evenly
Upgrade Front Brakes?
This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors. X-Line kit requires 17" wheels for caliper clearance
Share (0)
Total: 0 Total: 0
SKU: LC804INIMSKIT Categories: , , , , Tag: Brand:

Description

Dobinsons 4″ lift for 80 series – Dobinsons offer this 3.5-4.0″ IMS suspension system for the 1990 to 1997 Toyota Land Cruiser 80 Series, for trucks with or without an aftermarket bumper and winch on the front, and light to heavy load in the rear (drawers, rear bumper, etc,).  You can select which coils you’d like as well as which level of shocks, all based on your budget and what type of preference you have.

Dobinsons 4″ lift kit should include coils, steering damper, 5 degree castor kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension.  You choose all the options you’d like.

NOTE: Rear sway bar extension brackets are recommended, but can’t be included due to 2 different designs offered (sold separately), ask us for help.  Extended brake lines, bump stops, front drive shaft, and steering arms may be required, but are not offered by Dobinsons.  This suspension is for off-road use only.  Refer to local laws before purchasing or installation.

dobinsons IMS specifications specs sheet

Dobinsons IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

1990 Toyota Land Cruiser Lift Kit
1991 Toyota Land Cruiser Lift Kit
1992 Toyota Land Cruiser Lift Kit
1993 Toyota Land Cruiser Lift Kit
1994 Toyota Land Cruiser Lift Kit
1995 Toyota Land Cruiser Lift Kit
1996 Toyota Land Cruiser Lift Kit
1997 Toyota Land Cruiser Lift Kit

1995 Lexus LX450
1996 Lexus LX450
1997 Lexus LX450

12 reviews for Dobinsons 3.5-4″ IMS Lift Kit Builder | Land Cruiser 80 Series

  1. Bradley (verified owner) –

    Just what I needed.

  2. Timothy (verified owner) –

    Just what I needed.

  3. Timothy (verified owner) –

    Very fast delivery.

  4. Jeffrey (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  5. Chad (verified owner) –

    Very fast delivery.

  6. Jason (verified owner) –

    It’s exactly what I wanted.

  7. Jacob (verified owner) –

    Value for money, super satisfied.

  8. Nicholas (verified owner) –

    Good quality, really nice.

  9. Nicholas (verified owner) –

    5 Stars!!

  10. Timothy (verified owner) –

    Value for money, super satisfied.

  11. Adam (verified owner) –

    Very good customer service, super friendly.

  12. Jacob (verified owner) –

    It’s exactly what I wanted.

Add a review

Related products

  • Dobinsons SP59-060 greasable pin bolt kit for leaf springs
    Dobinsons

    Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
    • Made from the highest quality raw materials to give years of life under the harshest conditions
    • Over 60 years of leaf spring design and manufacturing
    • Kit includes 2 greasable bolts, as shown in the photo
    • Order 2 kits if you want to replace fixed and shackle end bolts
    • Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+.  See full vehicle list below

     

    (12 reviews)
    $60.00 Add to cart
  • Dobinsons rear coil springs in teal color
    80 Series Land Cruiser (1990-1997)

    Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
    • Suits Land Cruiser 80 Series and Lexus LX450
    • C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • 500/510mm free height, 16mm wire, 179LBF/in rate
    • Sold in Pairs
    (3 reviews)
    $270.00 Add to cart
    • 80 Series Stock Height Lift Kit
    80 Series Land Cruiser (1990-1997)

    Dobinsons 80 Series Stock Height Restoration Suspension Kit (inc all shock options)
    • Suits Land Cruiser 80 Series and Lexus LX450
    • Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
    • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • Coils are specifically suited to match OE spec and height
    • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs.  Add on additional parts if desired
    (18 reviews)
    $1,160.00 Select options
  • Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit PB59-1101K
    Dobinsons

    Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
    • Suits Toyota Tacoma 2005-2023
    • For any lift height, or no lift. These are OE replacement bushings.
    • Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
    • Pressing of OE bushings may be necessary during removal and installation
    • Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
    • Greasable bolts are sold in pairs, sold separately
    • OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
    • Tacoma poly bushing kit installation
    • Link to Greasable Bolts, Click here
    (14 reviews)
    $105.00 Add to cart