Your cart is currently empty!
RCI Rear 4Runner Diff Skid Plate | 2010-2024 4Runner w/KDSS
- Suits Toyota 4Runner 5th Gen 2010-2024 WITH KDSS
- Look at this other skid setup for non-KDSS models if you have a regular sway bar
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
$329.99 Original price was: $329.99.$297.00Current price is: $297.00.
Description
Underbody damage is costly. Protect your investment with an RCI 4Runner Diff skid, the ultimate defense for all on and off-road hazards.
Built of laser cut 3/16” steel, this plate is custom fit to protect the rear differential of all 5th generation 2010-2024 4Runners with KDSS, with premium quality, fit and finish.
**ONLY FOR KDSS MODELS** -See link for NON-KDSS model Differential Skid Plate
4Runner Diff Skid KEY FEATURES
- ***FITS KDSS MODEL ONLY***
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- This 4Runner Diff Skid Plate is a Direct bolt on addition to existing factory attachment points, no drilling required
MADE IN USA
RCI Metalworks LLC (DBA RCI Off Road) is a Colorado based company owned and operated out of Loveland, Colorado. We specialize in the manufacturing of aftermarket truck and SUV accessories. We are passionate about what we do and the products we build, which is why each of our products are carefully engineered and thoroughly tested to ensure an innovative solution that will exceed the needs of our customers.
At RCI we proudly engineer and manufacture all of our products in house at our Loveland, CO Location. This differentiates us within the industry and allows us to offer the absolute best products with extremely competitive prices.
Our in-house manufacturing processes include:
- CNC Fiber Laser Cutting of Sheet Metal
- CNC Fiber Laser Tube Cutting
- CNC Press Brake Forming
- Robotic welding
- Mig and Tig Welding of Steel and Aluminum
- CNC Tube Bending and Notching
- Fully automated powder coating line with 4 stage wash system and integrated primer coating
- In-house R&D and CAD design utilizing 3D scanning and FEA
- Warehousing, Packaging, and Shipping
- And much more!
Vehicle Fitment:
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner
2024 Toyota 4Runner
Additional information
Weight | 22 lbs |
---|---|
Dimensions | 27 × 14 × 6 in |
Related products
-
ExceptionsShips FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons MRA59-A574 3-Way Adjustable MRA Extended Travel Front Struts
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, suitable for 2 – 3.5″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Extended Travel – 575mm at full extension, 420mm compressed
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
$1,280.00 Add to cart -
Dobinsons
Dobinsons C59-677V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 500mm free height, 16mm wire diameter, 157-230LBF/IN variable spring Rate
$305.00 Select options -
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
$345.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesETA is July 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart