Your cart is currently empty!
Sale!
On Sale All November!!
Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23 – No Ball Joints
- Includes left and right hand side upper control arms, includes ball joint caps, OE style rubber frame bushings (installed), and washers
- This does NOT include any ball joints – use aftermarket or OEM original sized upper ball joints
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Product Video
- Also available with ball joints installed, here
Original price was: $575.00.$488.75Current price is: $488.75.
In Stock
SKU: UCA59-003
Categories: Control Arms, Control Arms - Tacoma 2nd Gen, Control Arms - Tacoma 3rd Gen, Dobinsons, Fortuner (2005-2015), Hilux Revo (2016+), Hilux Vigo (2005-2015), Suspension, Tacoma 2nd Gen (2005-2015), Tacoma 3rd Gen (2016-2023), Upper Control Arms
Tags: UCA, UCA59, UCA59-003K
Brand: Dobinsons Spring & Suspension
Description
Dobinsons Tacoma UCA’s are front upper control arms WITHOUT BALL JOINTS for a lifted vehicle and come as a left and right set. This will fit all 4×4 Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023. Why would you add Dobinsons Tacoma UCA’s to your vehicle? If you’ve added a lift, you need to correct the ball joint angle at the wheel to produce a better ride. This also allows for a better wheel alignment, giving better steering and feel from the driver’s seat.
These will be noise-free as they use rubber bushings and a factory style ball joint, made by Sankei in Japan. The Dobinsons Tacoma UCA’s have a rotated ball joint cup to set the ball joint to the original neutral position even with a lift, and this creates better ride quality while maximizing wheel travel. No greasing is necessary after installation, as the ball joint is sealed and it holds the grease inside with a high quality rubber boot. Zerk fittings are prone to allowing contaminants into the ball joint when regreasing and this will definitely reduce the overall life of the ball joint. Using a fully sealed one keeps out all the junk and gunk from offroad trails whilst requiring no maintenance, just like a factory ball joint. Those are designed to last many many years.
8 reviews for Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23 – No Ball Joints
You must be logged in to post a review.
You may also like…
-
Sale!Upper Control ArmsOn Sale All November!!
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
(4 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons Billet Aluminum Adjustable UCA’s Pair | Toyota Tacoma 2005-23
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
- Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered Here
(9 reviews)
Related products
-
Sale!DobinsonsOn Sale All November!!
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
Sale!SuspensionOn Sale All November!!
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
Sale!4Runner 5th Gen (2010-2024)On Sale All November!!
Dobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(6 reviews)Original price was: $310.00.$263.50Current price is: $263.50. Select options This product has multiple variants. The options may be chosen on the product page
Jose (verified owner) –
Value for money, super satisfied.
Michael (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
John (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Jeffrey (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Charles (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Matthew (verified owner) –
Good quality, really nice.
William (verified owner) –
Good quality, really nice.
Timothy (verified owner) –
Value for money, super satisfied.