Your cart is currently empty!
Dobinsons TB45-1446 Torsion Bar Pair for Nissan Frontier D22 1998-2004 892mm
- Suits Nissan Frontier and Navara D22 models from 1998-2004
- TB45-1446 measure 892mm in total length – check before ordering if you aren’t sure
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Photo for illustration purposes
$350.00
In StockDescription
Dobinsons TB45-1446 Torsion bar set is suitable for the Nissan Frontier and Navara D22 models from 1998 to 2004, measuring 892mm long. Make sure to measure your stock torsion bars before ordering this new set, as there’s a chance it could be the 892mm set from later models.
Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.
Dobinsons TB45-1446 torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons TB45-1446 torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
A thick durable powdercoat provides protection against corrosion.
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL
When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
INCREASED SPRING RATEÂ
Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Simple Fitment
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
Directionally Preset & Scragged
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Durable Powdercoat Finish
A thick durable powdercoat provides protection against corrosion.
Cold Rolled Splines
Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
Vehicle Suitability:
1998 Nissan Frontier D22
1999 Nissan Frontier D22
2000 Nissan Frontier D22
2001 Nissan Frontier D22
2002 Nissan Frontier D22
2003 Nissan Frontier D22
2004 Nissan Frontier D22
1998 Nissan Navara D22
1999 Nissan Navara D22
2000 Nissan Navara D22
2001 Nissan Navara D22
2002 Nissan Navara D22
2003 Nissan Navara D22
2004 Nissan Navara D22
Additional information
| Weight | 17 lbs |
|---|
8 reviews for Dobinsons TB45-1446 Torsion Bar Pair for Nissan Frontier D22 1998-2004 892mm
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75,77, and 80 series and Lexus LX450 from 1980-1997
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- 650mm extended, 420mm compressed
(7 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Toyota Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews) -
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews)
Joshua (verified owner) –
5 Stars!!
Bryan (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Anthony (verified owner) –
Would definitely buy from this site again.
Steven (verified owner) –
Great description on the page, easy to understand what I was buying.
Bradley (verified owner) –
This is my go-to now for off road parts.
Patrick (verified owner) –
It’s exactly what I wanted.
Brandon (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Edward (verified owner) –
Would definitely buy from this site again.