You may be interested in…

• 

  Brake Lines

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips

  $95.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A682 3-Way Adjustable MRA Rear Shocks | 0-3″ Lift

  • Suits Toyota Land Cruiser 80 Series 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2021, Sequoia 2001-2007, suitable for 0 – 3″ of lift
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 620mm extended, 390mm compressed
  • Installation Instructions of the MRA Shocks

  $1,350.00 Add to cart
• 

  • 
  • 
  • 

  Awning Walls & Rooms

  Ships FREE !!
  within 48 US States

  OVS Nomadic 6.5FT Awning Shade Wall (Front)

  • Mounts to the end of the awning (away from the vehicle)
  • Slides into the channel at the end of the awning
  • Body Material: 600D Poly Cotton Rip Stop
  • Mounting: C Channel Slide
  • Treatment: Waterproofing on Canvas
  • QTY: 1
  • Set Up Time: 1 Minute
  • Warranty: 4 Year Limited Warranty

  $99.99 Read more
• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  $69.00 Add to cart
• 

  Tundra 3rd Gen (2022-2024)

  Dobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma

  • Suits all 2022+ Toyota Tundra and 2024+ Toyota Tacoma
  • Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
  • Made from HSLA (High Strength Low Alloy) Steel
  • 40mm OD and 6mm wall thickness with support brace
  • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
  • Zinc plated, then E-coated black, for the ultimate finish and protection
  • Sold as a pair

  $445.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-50941 Long Travel Rear IMS Shocks for 2005-23 Tacoma

  • Longer travel rear shocks for maximum down travel with a bolt-on shock
  • SOLD IN PAIRS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Specifications 16.5″ compressed length, 26.9″ extended length
  • These shocks require extended brake lines and extended bump stops
  • Full 2 year limited warranty, no set rebuild time period

  $580.00 Add to cart
• 

  • 
  • 
  • 

  MRA Remote Resi 3-Way Adjustable Monotube

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A701 3-Way Adjustable MRA Shocks

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Shock Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 609mm extended, 389mm compressed
  • SOLD IN PAIRS
  • Now comes with a longer hose and different mounting instructions

  $1,150.00 Add to cart
• 

  SPC

  SPC 87520 – Nissan Frontier Xterra Alignment Cam Kit (2 Pairs)

  • Suits 2005+ and 2022+ Nissan Frontier and Nissan Xterra (2005-2015)
  • These cams are designed to install in the lower control arms for camber and caster adjustment
  • They replace the original non-adjustable lower control arm bolts
  • Front Adjustment range: Camber/Caster ±2.00°
  • Installation time: .3 hr/side
  • The purchase includes 2 pairs, enough for 1 vehicle
  • Installation Guide

  $90.00 Add to cart
• 

  • 
  • 

  Wheelers Off Road

  Wheeler’s Rear Leaf U-Bolt Flip Kit for 2005-2023 Tacoma with Superbump Bump Stops

  • Designed for Rear Leaf Springs Only, 2005-current Toyota Tacoma 4×4 and Prerunner
  • Provides increased ground clearance under the axle by flipping the u-bolts upwards
  • U-bolt mounting Plates are Clear Zinc-Coated and 3/8″ Thick
  • Threaded Holes are 3/8″-16 with a 4″ Spread
  • Includes (4) Zinc-Coated 1/2″ Grade 5 U-bolts (8.75″ Long) with Zinc-Coated Hardware
  • Includes SuperBump Micro-Cellular Polyurethane Progressive Bump Stop Set
  • Installation Instructions

  $312.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Icon Tubular UCA DJ Kit for 07-21 Tundra + 08-22 Sequoia

  • Suits 2007-2021 Tundra and 2008-2022 Sequoia 4×4 Models with 1.75+ of lift
  • ICON Delta Joint
  • 1026 DOM Steel Construction
  • CNC Bent Tubing
  • Serviceable Dual Stage Bushings
  • CNC Machined Bushing Housings and Sleeves
  • Built-In Caster Correction
  • Black Semi-Gloss Powder Coat Finish
  • Installation Guide
  • Warranty Info

  $923.95 Original price was: $923.95.$879.95Current price is: $879.95. Add to cart
• 

  All Pro Offroad

  Ships FREE !!
  within 48 US States

  All Pro Tacoma IFS Skid Plate – Bare Steel

  • Suits 2005-2023 Toyota Tacoma 4×4 Models
  • Covers from the front bumper down to the first cross member
  • 3/16-inch steel – Bare Steel – needs to be painted before installation
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $380.00 Add to cart
• 

  • 
  • 
  • 

  All Pro Offroad

  Ships FREE !!
  within 48 US States

  All Pro Tacoma IFS Skid Plate – Steel Black Coated

  • Suits 2005-2023 Toyota Tacoma 4×4 Models
  • Covers from the front bumper down to the first cross member
  • 3/16-inch steel – Black Powder Coated Steel
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $440.00 Add to cart
• 

  • 
  • 
  • 

  Performance Upgrades - FJ Cruiser Late

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Powerbrake D-Line HP Rotor and Pad Kit | FJ Cruiser Front

  • Suits Toyota FJ Cruiser 2006-2014 Front
  • Also available for the REAR
  • Powerbrake D-Line Features
    • Rotors are cast from a proprietary high carbon cast-iron alloy.
    • Rotors are machined to tolerances up to three times tighter than the industry norm.
    • All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
    • Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
    • Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
    • Matched high friction PB05 brake pads take the guesswork out of pad selection.
    • Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
  • Powerbrake D-Line Benefits at a Glance
    • Reduced stopping distances in both wet and dry conditions.
    • Reduced brake fade and improved brake consistency.
    • Improved initial brake response (bite).
    • Improved brake modulation particularly during emergency stops.
    • Improved resistance to rotor distortion (warping) and cracking at high temperatures.
  • What’s Included in Powerbrake D-Line?
    • 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
    • An axle set of matched PB05 high-performance brake pads – Made in Japan.
    • Fits as per a standard rotor and pad change, using the vehicle’s original calipers.

  $810.00 Add to cart
• 

  • 
  • 
  • 

  Awning Walls & Rooms

  Ships FREE !!
  within 48 US States

  Overland Vehicle Systems Nomadic 6.5FT Awning Side Shade Wall

  • Awning Side Wall / Wind Break for 6.5FT Awnings
  • Body Material: 600D Poly Cotton Rip Stop
  • Mounting: Velcro Straps
  • Can Mount to Either Side of Awning (not the end)
  • Treatment: Waterproofing on Canvas
  • QTY: 1
  • Open Dimensions: X” x X” x X”
  • Set Up Time: 1 Minute
  • Warranty: 4 Year Limited Warranty

  $99.99 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser

  • Fully rebuildable and re-valvable
  • Extended Travel – 567mm extended, 417mm compressed
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

  $650.00 Add to cart
• 

  • 
  • 
  • 

  All Pro Offroad

  Ships FREE !!
  within 48 US States

  All Pro Tacoma IFS Skid Plate – Raw Aluminum

  • Suits 2005-2023 Toyota Tacoma 4×4 Models
  • Covers from the front bumper down to the first cross member
  • 1/4-inch aluminum construction – Raw aluminum
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $380.00 Add to cart
• 

  • 
  • 
  • 

  Bronco 2021-2024+

  Ford Bronco Diff Cover by ARB | 2021+

  • Suits 2021+ Ford Bronco 2-door and 4-door models with Dana 44 Rear Axle
  • High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
  • Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss\
  • Approach/departure angle optimized by angled exterior surface
  • Prolonged carrier bearing life due to extra support to the bearing alignment
  • Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
  • Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
  • Low profile drain plug design resists damage from obstacles
  • Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
  • Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
  • Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
  • Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
  • Made in Red or Black, choose below

  $187.00 Select options
• 

  • 
  • 
  • 

  Frontier D41 2022+

  Ships FREE !!
  within 48 US States

  Dobinsons MRA45-A653 3-Way Adjustable Rear Shocks for 2022+ Nissan Frontier

  • Suits 2022+ Nissan D41 Frontier
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI CNC machined components for precise tolerances
  • Parker Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
  • strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Sold in Pairs

  $1,150.00 Add to cart
• 

  Brake Lines

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Black)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips
  • This set is BLACK in color

  $95.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Bronco 2021-2024+

  On Sale For Memorial Day!!

  RCI Full Skid Plate Package | 2021+ Ford Bronco 2/4 Door

  • Suits 2021+ Ford Bronco 2 door and 4 door models – Does not suit Bronco Sport models
  • Includes engine (two piece), transmission and transfer-case skid plates.
  • Protects expensive EPAS power steering unit, front differential, front cross-member, engine, engine bay, intercooler, sway bar disconnect (if applicable),, transmission, exhaust, oil pan, transfer-case, and more!
  • Compatible with 4×4 and Raptor models
  • Simple installation and removal of all subsections for maintenance
  • Extremely high clearance hugs the truck very tight and does not sacrifice ground clearance for protection
  • Smooth, flat surface that easily slides over obstacles
  • Steel version-black epoxy powder coated for rust resistant, durable and high quality finish
  • Installs in minutes
  • All hardware and installation instructions provided
  • Direct bolt on addition to existing factory attachment points, no drilling required
  • *May Not be Compatible with all 4+” Lift Kits (drop bracket kits)
  • Made in the USA

  $1,056.97 Original price was: $1,056.97.$951.00Current price is: $951.00. Select options
• 

  • 
  • 

  200 Series Land Cruiser (2008-2021)

  Ships FREE !!
  within 48 US States

  Dobinsons Adjustable Rear Lower Control Arms Pair | LC200 LC300 Sequoia 23+

  • Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, and 2023+ Toyota Sequoia
  • Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
  • Made from HSLA (High Strength Low Alloy) Steel
  • 40mm OD and 6mm wall thickness with support brace
  • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
  • Zinc plated, then E-coated black, for the ultimate finish and protection
  • Sold as a pair

  $445.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s | Toyota Tacoma 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• 

  • 
  • 

  Timbren

  Ships FREE !!
  within 48 US States

  Timbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s

  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series

  • Specs:

    • 2,000 lb capacity
    • 4,800 lb bump load capacity
    • Overall kit height = 5”
    • Total deflected (compressed) height = 2.75”
    • Amount of deflection (compression) = 2.25”
  • Click here for instructions
  • Installation video from Exit Offroad
  • Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs.  Timbren make 2 options, they do not include any longer bolts which may be required
    • A25722-90F00 (1/2″ spacer)
    • A25723-90AD00 (1″ spacer)

  $269.36 Add to cart