“1/2″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460” has been added to your cart. Continue shopping
You may be interested in…
-
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesApache Offroad 2″ Rear Bump Stop Extensions | 4Runner FJ Cruiser GX470 GX460
- Apache Offroad 2″ Rear Offset Bump Stop Extensions are required for rear long travel applications
- Prevents the shock from limiting out during up travel and damaging the shock, thus shortening its life
- Our 2″ extensions allow for maximum travel and are offset to allow for the use of larger tires without rubbing, as they are prone to do in the factory location
- They also reposition the bump stop to account for correct alignment with your long travel suspension
- Fabricated out of 3/16″ steel and powder coated black.
- Grade 8 Mounting Hardware Included
- Sold as a pair, 1 per vehicle needed
- Use with OEM bump stops or aftermarket ones, depending on how much you need to limit your up travel
- Suits:
- 2003-2024 Toyota 4Runner
- 2007-2019 Toyota FJ Cruiser
- 2002-2009 Lexus GX 470
- 2010-2023 Lexus GX 460
(10 reviews) -
RCV AxlesFREE SHIPPING
within 48 US StatesRCV Ultimate IFS CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 1-inch balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 35 spline 300M, the strongest in the industry
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
(9 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50575 2.2″ IFP Long Travel Rear Shocks Pair
- Suits 2003-2023 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 2 – 3.5″ of lift
- Will not suit vehicles with KDSS (too long)
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- IMS59-50575 – Specifications. 720mm extended, 438mm compressed
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Can Use with Timbren extended rear bump stops with appropriate spacers in place
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stop extensions or suitable extended length bump stops are required, due to the longer compressed length of these shocks compared to stock
- Full 2 year limited warranty, no set rebuild time period
(17 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50701 2.2″ IFP Shocks Pair | Toyota and Lexus (0-3″ lift)
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Specifications: 598mm extended, 389mm compressed
(16 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(10 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-745 Rear Shocks Pair | FJ Cruiser 4Runner GX470 GX460
- Suits Toyota 4Runner 2003-2024 and Toyota FJ Cruiser, Lexus Gx470 and GX460 models 2006 to 2023, with 0-2.5″ of lift
- Effective August 2024, GS59-705 was superseded with GS59-745
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-745 Specifications: 590mm extended, 355mm compressed, 50mm body size
- Stud upper mount, eyelet lower mount
- Made in Yellow and Black
- Photos for illustration purposes
(13 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 5th Gen (2010-2024)
Dobinsons 15mm Rear Spacer | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits various vehicles, as listed below
- High Quality Polyurethane, maintains height over time
- Fits on top of OE isolator, below the frame mount
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of lift
(18 reviews) -
Brake LinesFREE SHIPPING
within 48 US StatesApache Offroad Extended Rear Brake Lines for 4Runner FJ GX470 GX460
- D.O.T. Certified stainless steel braided and coated with a PVC cover
- 20″ long, works with long travel rear suspension setups
- Suits up to 4″ of lift with long travel shocks or not
- Suits the following vehicles: Toyota 4Runner 4th Gen 2003-2009, Toyota 4Runner 5th Gen 2010-2024, Toyota FJ Cruiser all years, Lexus GX470 all years, Lexus GX460 all years
- Not recommended for stock or un-lifted vehicles, as the brake lines are much longer than necessary
- Sold as a pair with new retaining clips
- Warranty- 2 Year unlimited mile warranty against manufacturers defects.
(10 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesIcon Tubular Lower Trailing Arm Pair | 4Runner FJ Cruiser GX470 GX460 LC200
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Lexus LX570 and 200 Series 2008-2021
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- Offset lower link front pivots improve roll steer
- Tangent lower link barrel design reduces risk of off-road hangups
- Integrated OEM emergency brake bracket mount
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON’s lifetime warranty
- Sold as a Pair
- Installation Guide
- Warranty Info
(7 reviews) -
MRA Remote Resi 3-Way Adjustable MonotubeFREE SHIPPING
within 48 US StatesDobinsons MRA59-A701 3-Way Adjustable MRA Shocks Pair
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 609mm extended, 389mm compressed
- SOLD IN PAIRS
- Now comes with a longer hose and different mounting instructions
(18 reviews)
Cart totals
| Subtotal | $6,394.67 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $486.07 |
| Total | $6,966.74 |
