“Dobinsons Rear Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser 1990-1997” has been added to your cart. Continue shopping
You may be interested in…
-
300 Series Land Cruiser (2021+)FREE SHIPPING
within 48 US StatesETA is late MarchDobinsons IMS59-60440 2.6″ IFP Front Struts Pair | LC250 LC300 GX550
- Suits Toyota Land Cruiser 300 Series 2021+ (not sold in the USA), and is an Extended Travel Option for 2024+ Toyota Land Cruiser 250 Series and Lexus GX550 for 2-3″ of lift
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- 624mm extended, 453mm compressed
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Note: If installed on a Toyota Land Cruiser 250 Series or Lexus GX550, a diff drop kit and aftermarket UCA’s must be run to prevent CV bind and coil spring contact at full droop
(8 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons 80 Series Snorkel Kit for Land Cruiser 1990-97
- 80 Series Snorkel Kit – Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997 models
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(9 reviews) -
Sequoia 3rd Gen (2023-2025+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A441 2.6″ 3-Way Adjustable Rear Shocks Pair
- Suits 2023+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2021+ Toyota Land Cruiser 300 Series and 2024+ Land Cruiser 250 Series and Lexus GX550
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Specifications – 680mm extended, 422mm compressed
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, and Adjuster Wrench
- Installation Instructions
- Full 2 year limited warranty, no set rebuild time period
- NOTE: The GX550 with the Overtrail edition or any other edition with an electrical plug on the rear shocks will eventually show an error code on the dash. The only way to get rid of the code for right now is to plug in the old shocks and it goes away temporarily. Waiting on someone to create a module to trick the system
(15 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons SS59A824 Adjustable Monotube Steering Damper | Land Cruiser
- Suits Land Cruiser 60, 70 and 80 Series and Lexus LX450
- 56mm Extruded and CNC machined 6061-T6 hard anodized aluminum body
- Hard-anodized and clear coated for a durable finish.
- External reservoir design separates oil and high-pressure nitrogen gas
- Black-anodized, CNC machined 6061-T6 billet aluminum Components
- 5/8” hard chrome plated heat treated alloy steel Shaft
- 50mm high-flow 6061-T6 CNC machined Piston
- Natural rubber OEM style bushings
- Direct replacement for stock and after-market lifts kits
- 12 stage adjustment range
- Installation Instructions
(5 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series and Lexus LX450 from 1980-1997
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- 650mm extended, 420mm compressed
(7 reviews)
Cart totals
| Subtotal | $9,292.44 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $714.58 |
| Total | $10,242.02 |
