You may be interested in…

• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A684 3-Way Adjustable MRA Front Shocks | 80 Series 6″ Lift

  • Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Installation Instructions of the MRA Shocks
  • 728mm extended, 432mm compressed
  • Full 2 year limited warranty, no set rebuild time period

  $1,350.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60684 Front IMS Shocks | Land Cruiser 80 Series (6″ lift)

  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 728mm extended, 432mm compressed

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Recovery

  Ships FREE !!
  within 48 US States

  Dobinsons 12V Electric Winch – 12000 LBS with Synthetic Rope

  • 12,000 Capacity
  • 6.5HP Series Wound Motor
  • 216:1 Gear Reduction
  • 57 LBS Weight
  • 10×4.5″ Mounting Pattern
  • 6.3 x 8.3 x 21.5″ Overall Dimensions
  • 64 x 224mm Drum, Automatic Braking Action
  • 3 Stage Planetary Gears
  • Plug in Control Range of 10 FT
  • Includes Various Control Box Mounting Brackets: Control Box to Cross Rods, Motor Housing & Flat Surface/Bumper Tops
  • Sealed Solenoid Box, More Powerful
  • Easy Quick Flop Clutch
  • Improved Casings
  • Motor Housing Breather
  • Includes 100FT Synthetic Rope with Hook, Aluminum Hawse Fairlead, Hand Held Control and Wireless Remote (30ft Range)

  $1,245.00 Add to cart
• 

  New Item

  • 
  • 
  • 

  Shocks - 80 Series Land Cruiser

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60681 Rear IMS 2.6″ Shocks | 80 Series – 31″ Extended

  • 31″ long 2.6″ body shocks for the rear of a Toyota Land Cruiser 80 Series
  • For custom use, extreme rear long travel shocks, longer than the Dobinsons 6″ lift shocks
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 790mm (31.1″) extended, 480mm (18.9″) compressed
  • Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
  • Photo for illustration purposes

  $650.00 Add to cart