Your cart is currently empty!
Sale!
2024+ Tacoma Skid Plates Package from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Includes engine, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain hole allows easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Hardware included
- Direct bolt on addition to existing factory attachment points, no drilling required!
- Please note that some images show our A-Arm skid plates however they are not included with the skid plate package
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
Original price was: $1,001.97.$901.77Current price is: $901.77.
In StockDescription
New 2024+ Tacoma Skid Plates Package from RCI will provide the maximum protection for your 2024+ Tacoma with a skid plate package by RCI Offroad! This company is the first to not only offer a full package, but to offer it in a choice of steel or aluminum. Built in Colorado, you can’t go wrong with a set of these heavy duty skid plates to properly protect the underside of your brand new Toyota Truck.
Package includes three skid plates:
- Engine
- Transmission
- Transfer-case(with 3/16″ steel crossmember)
Protect your investment with RCI skids, the ultimate defense for all on and off-road hazards.
Built with your choice of laser cut 3/16″ steel or 1/4″ aluminum, this package is custom fit to protect all 4th generation Tacomas with premium quality, fit and finish.
2024 Tacoma Skid Plates KEY FEATURES
- Includes engine, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain hole allows easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Hardware included
- Direct bolt on addition to existing factory attachment points, no drilling required!
- Please note that some images show our A-Arm skid plates however they are not included with the skid plate package
WEIGHT
- 3/16″ Steel 128 lbs
- 1/4″ Aluminum 65 lbs
FITMENT
- Verified to fit 4×4 TRD Offroad non-hybrid models
- Suspected to fit other models, but not yet verified
INCLUDED COMPONENTS
- Engine Skid Plate
- Standoff Bracket (Always Steel Black Powder Coated)
- Hardware Kit
- Transmission Skid Plate
- Hardware Kit
- Transfer Case Skid Plate
- Crossmember (Always Steel Black Powder Coated)
- Hardware Kit
Vehicle Suitability:
2024 Toyota Tacoma
4th Gen Toyota Tacoma
You must be logged in to post a review.
Related products
-
80 Series Land Cruiser (1990-1997)Price Increase Coming May 1stDobinsons Land Cruiser 80 Series Rear Bumper with Tire and Jerry Can Carrier 1990-1997
- Suits all Toyota Land Cruiser 80 Series and Lexus LX450 from 1990-1997
- See product walk-around video down below
- Comes with Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire, on right side (US Passenger side)
- Includes single or dual Jerry Can Carrier on the left side (US Driver’s side)
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(15 reviews) -
Rear BumpersPrice Increase Coming May 1st
Dobinsons Land Cruiser 62 Series Rear Bumper with Tire + Jerry Can Carrier HJ61 FJ62
- Suits 1987-1990 HJ61 and FJ62 models only due to rear cross member difference
- Using it on an earlier model will require customization on customer’s end – see cross member photo
- Original cross member must have the 4 center mounting holes that the new Dobinsons bumper will use
- The earlier model frames are not as wide as the later model, so you’ll have to make fill-in pieces for proper fitment
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Choose from Single or Twin jerry can holder
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(12 reviews) -
Sale!Tacoma 3rd Gen (2016-2023)
RCI Rock Sliders | 2016-2023 Tacoma
- Fits 2016-2023 Tacoma 4wd access cab and double cab trucks
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Made to order from your selections below
- Made in USA
(8 reviews) -
Rear BumpersPrice Increase Coming May 1st
Dobinsons Toyota Land Cruiser 200 Series Rear Bumper 2008-2021
- For Toyota Land Cruiser 200 Series from 2008 to 2021
- DOES NOT SUIT MODELS WITH LANE ASSIST
- Comes standard as Black Powder Coat (customer can have his local paint shop color-match as some photos show)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(13 reviews)
Reviews
There are no reviews yet.