Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Apache Offroad HD Chromoly Adjustable Sway Bar Links | 3rd Gen 4Runner 1996-2002
- Suits 3rd Gen Toyota 4Runner 1996-2002, Prado 90 Series, Front or Rear
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Order 1 for 1 vehicle
- Adjustable (on vehicle) from 165mm – 206mm – Requires at least 1″ of lift if used in the front and 2″ in the rear.Â
- Custom Forged Oversized (22mm ball) Chromoly Rod End / Joints
- Premium Silicone Dust Boots
- High Carbon Steel Center Link
- Black EDP Coating for corrosion resistance
- High Quality Polyurethane Bushings on frame side
- Serrated Oval / Distorted Thread Locking Nut – The factory sway bar material expands and contracts as you drive, thus causing the nut to come loose and the sway bar link to disconnect. This is not ideal. This style nut, is the best solution we have found to the issue, though we do still recommend the use of thread locker at install.
- Mounting hardware included
- Rod end machined to accept hex key to prevent the rod end from spinning during installation. Other brands come with a nut on the inner side of the shaft, which is harder to use and more likely to cause you to tear the boot upon installation.
- Sold as a pair
- Maintenance Free Design
- 2 year unlimited mile warranty
$205.00
In StockDescription
The Apache Offroad HD adjustable sway bar links were engineered to create a strong link between your sway bar and frame, as well as, correct your sway bar alignment post lift install. Over the years we have noticed that some customers have broken the studs in their links, causing potentially catastrophic failure to other components on the vehicle. Thus leading to the creation of our HD chromoly link set.
By positioning the sway bar to a neutral position you are able to maximize travel and handling of your vehicle.
- Adjustable (on vehicle) from 165mm – 206mm – Requires at least 1″ of lift if used in the front and 2″ in the rear.Â
- Custom Forged Oversized (22mm ball) Chromoly Rod End / Joints
- Premium Silicone Dust Boots
- High Carbon Steel Center Link
- Black EDP Coating for corrosion resistance
- High Quality Polyurethane Bushings on frame side
- Serrated Oval / Distorted Thread Locking Nut – The factory sway bar material expands and contracts as you drive, thus causing the nut to come loose and the sway bar link to disconnect. This is not ideal. This style nut, is the best solution we have found to the issue, though we do still recommend the use of thread locker at install.
- Mounting hardware included
- Rod end machined to accept hex key to prevent the rod end from spinning during installation. Other brands come with a nut on the inner side of the shaft, which is harder to use and more likely to cause you to tear the boot upon installation.
- Sold as a pair
- Maintenance Free Design.
- 2 year unlimited mile warranty
Note- If you lose a nut- the frame side is size m12x1.25 and the stud / sway bar side is size is m12x1.5 / The locking nut going into the center link is 1/2″-20
Torque specs: We recommend using factory torque specs
Fitment:
- 1996-2002 TOYOTA 4RUNNER (3RD GEN)
- 1996-2002 TOYOTA LAND CRUISER PRADO 90 SERIES
Installation Help:
Installation is quite simple. Remove the factory sway bar link, and install the Apache link. With the vehicle on the ground, at ride height, Adjust the sway bar link until the angle of the sway bar is running in parallel with the lower trailing arm (link.) You also want your sway bar end ball stud to stick out straight. When installed correctly the link should not look like its being pulled to the rear. Be sure to tighten both upper locking nuts as well as the rod end locking nut against the center link. Apply thread locker to nuts and torque to factory spec.
Vehicle Fitment:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
1996 Toyota Land Cruiser Prado 90
1997 Toyota Land Cruiser Prado 90
1998 Toyota Land Cruiser Prado 90
1999 Toyota Land Cruiser Prado 90
2000 Toyota Land Cruiser Prado 90
2001 Toyota Land Cruiser Prado 90
2002 Toyota Land Cruiser Prado 90
10 reviews for Apache Offroad HD Chromoly Adjustable Sway Bar Links | 3rd Gen 4Runner 1996-2002
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/INÂ variable spring rate
- Rear Long Travel Coils Installation Guide
(15 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Stock Height Restoration Suspension Kit 1990-1997 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
(18 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(10 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page
Scott (verified owner) –
Great description on the page, easy to understand what I was buying.
Richard (verified owner) –
5 Stars!!
Jonathan (verified owner) –
Value for money, super satisfied.
Kevin (verified owner) –
Value for money, super satisfied.
Kenneth (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Paul (verified owner) –
It’s exactly what I wanted.
John (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Kevin (verified owner) –
Good quality, really nice.
Ryan (verified owner) –
Very fast delivery.
Timothy (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.