Your cart is currently empty!
Ships FREE !!
within 48 US States
within 48 US States
ARB RD193 Rear Air Locker Toyota 8.15″ 12 Bolt
- For Use With Toyota 8.15″ 12 Bolt Shim Adjusted 30 Spline solid axle – used for many years in some rear applications
- Full vehicle fitment list is further down in the main description, includes 5th Gen 4Runner, Lexus GX460, FJ Cruiser – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
$1,091.00
In StockDescription
ARB RD193 Rear Air Locker
GTIN: 09332018000569
ARB RD193 Rear Air Locker Toyota 12 Bolt Shimmed 8.15″ is made for a wide variety of Toyota vehicles that use the 12 Bolt Shimmed 8.15″ 30 Spline differential (solid axle).
The ARB Toyota 12 Bolt Shimmed 8.15″ 30 Spline Air Locker RD193 for your 30 spline axle for all gear ratios, can instantly lock differentials and allow you to tackle the toughest off-road terrain. The world’s best traction aid, ARB Air Lockers keep you moving in all conditions.
Air Lockers from ARB are currently available in over 100 configurations to suit a wide range of off-road and 4×4 vehicles from around the world. Because an air locker is only engaged when needed, it can be installed in BOTH the front and rear axles, with separate switches independently controlling the RD193 air locker from within the off-road truck or vehicle.
Installation of the ARB RD193 air locker should be performed by a qualified differential technician, although no special tools or skills are required apart from those necessary for fitting a standard differential. When installed with an ARB air compressor (high output or mini), the ARB RD193 – Toyota 12 Bolt Shimmed 8.15″ 30 Spline locker system is supplied as a complete kit which contains all of the parts necessary for proper installation, including industrial grade control switches, air lines and fittings. ARB offers two compressor models suitable for Air Locker operation (high output air compressor or mini air compressor). A dedicated air activation system is available which is extremely durable and compact. Alternatively a larger compressor can be specified, which is also perfect for inflating tires, air mattresses and a host of other applications where compressed air is required.
ARB RD193 Vehicle Fitment – All gear ratios
Toyota 4Runner 5th Gen 2010 to 2023 Rear (without OE locker)
Lexus GX460 2010 to 2023 Rear (without OE locker)
Toyota Prado 150 2010 onwards Rear (without OE locker)
Toyota FJ Cruiser 2010 onwards Rear (without OE locker)
Additional information
| Weight | 30 lbs |
|---|
Related products
-
DobinsonsDobinsons C59-701V Rear UHD Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 500mm free height, 17mm wire diameter, 210-245LBF/IN variable spring Rate
$305.00 Select options -
Dobinsons
Dobinsons GS59-574 Pair Extended Travel Struts FJ Cruiser 2010+ 4Runner 2010+ GX460
- Suits Toyota FJ Cruiser 2010+ and Toyota 4Runner 5th Gen 2010-2024, and Lexus GX460 (all years) for 2.0″ to 3.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-574 Specifications: Extended Travel – 575mm extended, 430mm compressed, 54mm body size
- Dobinsons GS59-574 struts add 1″ to the listed coil spring that are used with them, due to the raised coil seat. They are also longer than stock for taller lifts
- Example: Use a 2″ lift spring with these struts to get 3″ of lift
$350.00 Select options -
Dobinsons
Dobinsons C59-238 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 375mm, 17mm wire, 586LB Rate
$270.00 Select options -
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
$405.00 Add to cart
