Dobinsons IMS Lift Kit Toyota Land Cruiser 80 Series Build Your Kit 1" 1.5" 2.0" 2" 2.5" 3" 3.0"

Dobinsons IMS45-60114 IMS51-60116 IMS59-60683 IMS45-60914 IMS45-60912 IMS59-60684

Dobinsons IMS59-60682 IMS59-60687 IMS59-60685 IMS59-60441

Dobinsons RB59-522K rubber castor bush kit

Dobinsons SE59-517 Rear Swaybar extension kit for side of frame mount

SE59-519 Dobinsons Rear Swaybar Extensions for Toyota Land Cruiser 70 and 80 Series Bottom Chassis Mount

SE59-516 Dobinsons Front Swaybar Extension Set for Toyota Land Cruiser 70 and 80 Series (9/1991+)

Dobinsons 3 inch flexi coils front and rear with 4-5 inch IMS shocks a

Dobinsons 3 inch flexi coils front and rear with 4-5 inch IMS shocks

Dobinsons C59-613V 3 inch rear coils with IMS59-60687 4-5 inch IMS shocks

Dobinsons C59-612V 3 inch front coils with IMS45-60912 4-5 inch IMS shocks

Dobinsons 0-3.5″ IMS Lift Kit Builder | Land Cruiser 80 Series

Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
Coils are specifically suited to match OE fitment specs
IMS Shocks are Fully rebuildable and re-valvable
Zero shock fade in all terrains with full load
Direct, bolt-on replacement for easy fitment
IFP – Internal Floating Piston, separates oil and nitrogen
Corrosion resistant (EDP Surface Protection)
Heavy duty single piece lower leg
Enormous oil capacity
Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
Full 2 year limited warranty, no set rebuild time period
High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
Base kit includes front and rear coils and shocks, you can add any other parts you need – you choose
Choose your coils and load carrying ability, anywhere from 0″ up to 3.5″ of Lift

From $1,840.00

In Stock

Select Front Coils

C59-210V - Stock Height Progressive Rate
C59-234 - 2.0″ Lift Comfort Ride
C59-220V - 2.0″ Lift Progressive Rate with 0-110LBS Load
C59-222V - 2.0″ Lift Progressive Rate with 110-220LBS Load
C97-146VT - 2.5″ Lift Dual Rate 220LBS+ Long Travel
C59-166 - 2.5″ Lift no Load, 2.0″ with up to 220LBS Load
C59-612V - 3″ Lift Flexi up to 220LBS Load
C97-144VT - 3.5″ Dual Rate 220LBS+ Heavy Load Long Travel
C59-176 - 3.0″ Lift with 110LBS Load
C59-170 - 3.0″ Lift with 220LBS Load

Select Front Shocks

IMS59-60683 - IMS Front Monotube Shocks for 0-3" Lift
IMS45-60912 - 4" Long Travel Monotube Shocks for Flexi or VT 3" lift coils

Select Rear Coils

C59-221V - Stock height, variable rate
C59-269V - 1.75″ Comfort ride spring with only stock weight (variable rate)
C59-223V - 1.75″ lift with up to 220lbs weight (variable rate)
C59-169 - 1.75″ with up to 220lbs weight
C59-171 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
C97-147VT - 2.5″ Dual Rate with 400lbs weight (lifts more with less weight)
C59-167 - 2.5″ with up to 220lbs weight, 2" with 440lbs weight
C59-185 - 3″ lift with up to 220lbs weight
C59-153 - 3″ lift with 880LBS constant rear load
C59-613V - 3″ lift with up to 200 LBS (Flexi coils, variable rate)
C97-145VT - 3.5″ Dual Rate with 400LBS+ heavy load rear

Select Rear Shocks

IMS59-60682 - IMS Rear Monotube Shocks for 0-3" Lift
IMS59-60687 - 4" Long Travel IMS Rear Monotube Shocks for Flexi or VT 3" lift coils

Add Front Steering Damper?

A steering damper is a shock of sorts that dampens the left to right movement of the front axle. It should be replaced when new shocks are used

Add Rear LSPV Bracket?

The rear Load Sensing Proportioning Valve won't work once the vehicle is lifted without extending the attachment points. This means the rear brakes won't engage properly.

Add Front Caster Bushings, or OE replacements?

2-3" lift heights should have added caster correction. Stock height won't need these. Buy new OE bushings if yours are worn out and/or are planning to use caster plates

Add Front Bushings, Arms to Frame End?

If you're replacing the axle-end bushings of the front arms, you can add new bushings for the frame end as well.

Add Front Swaybar Drop Brackets?

To correct front swaybar angle with lifts of 1.5" or more, helps with articulation also

Add Rear Swaybar Drop Brackets?

To correct front swaybar angle with lifts of 1.5" or more, helps with articulation also. SE59-517 mounts to the side of the chassis, SE59-519 to the bottom of the chassis

Add Front Panhard Rod?

For lifts of 3" or more, the axle will be off center, this corrects that. Choose from left or right hand drive

Add Rear Panhard Rod?

For lifts of 3" or more, the axle will be off center, this corrects that. Same one for left and right hand drive

Add Rear Upper or Lower Trailing Arms?

Adjustable length, super heavy duty trailing arms - these help set your rear pinion angle as well as maximize articulation

Add Front Bump Stops?

Running a bigger lift with longer shocks usually requires new bump stops to control the compressed length of the shocks and also provide a better bottom-out than the old stock bump stops. Extensions or adjustments may still be needed
Click small square box on the right for full details

Add Rear Bump Stops?

Add Airbags?

If you regularly tow with your vehicle, carry a motorcycle on a hitch mount, or have huge variances between daily weight and loaded trip weight, a set of helper air springs will be very useful. Inserts inside your rear coil springs to add additional load support, Manually inflate or deflate the air bags to add or remove support or height. For up to 2.5" lift only

Add Extended Brake Lines?

Extended brake lines are required whenever using shocks for taller than a 3" lift, due to their extended down travel. Pay attention to the year range, as they're very specific

Upgrade Front Brakes?

This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors. X-Line kit requires 17" wheels for caliper clearance

SKU: LC80IMSKIT0-3.5IN Categories: 80 Series Land Cruiser (1990-1997), Dobinsons, Full Suspension Kits, Full Suspension Kits - 80 Series, Suspension Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons offer this complete IMS suspension system for the 1990 to 1997 Toyota Land Cruiser 80 Series, with different coil and height options offered in the drop down boxes. Using the amount of adding weight/load to your vehicle, such as bumpers, winch, 2nd battery, etc, choose the appropriate weight coil and desired lift height.

Base 80 series Dobinsons kit includes front and rear shocks and coils. Additional parts available to add on.

Caster bushing kit is not included, but is strongly recommended for 1.75″+ lifts so that the correct front end caster is achieved, resulting in a proper wheel alignment and the best ride quality. Not correcting the caster will not have the vehicle driving as ideally as possible.

***Contact us directly for info about the coils for different load options or questions***

To see all 80 Series Dobinsons components, click here: https://exitoffroad.com/product-category/toyota/land-cruiser/80-series-land-cruiser/

dobinsons IMS specifications specs sheet

Dobinsons IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilizing the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

1990 Toyota Land Cruiser Lift Kit
1991 Toyota Land Cruiser Lift Kit
1992 Toyota Land Cruiser Lift Kit
1993 Toyota Land Cruiser Lift Kit
1994 Toyota Land Cruiser Lift Kit
1995 Toyota Land Cruiser Lift Kit
1996 Toyota Land Cruiser Lift Kit
1997 Toyota Land Cruiser Lift Kit